Siemens 6ES7214-1BD22-0XB0 SIMATIC S7-200 CPU 224 PLC

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7214-1BD22-0XB0 is a SIMATIC S7-200 CPU 224 programmable logic controller for standalone machine control and small automation systems. This compact PLC CPU combines a 120 / 230 V AC power supply, 14 digital inputs for 24 V DC signals and 10 relay outputs for switching AC or DC loads within the applicable electrical ratings. Six high-speed counters operating at up to 30 kHz support pulse-signal monitoring in legacy machine and process-control installations.
Replacement commissioning is performed with STEP 7-Micro/WIN using a PC/PPI cable and the integrated RS-485 interface. The CPU supports PPI, MPI and Freeport communication for programming, HMI connections and serial devices. A replacement should match the installed S7-22x expansion layout, which can include up to 7 expansion modules, as well as any EM 277 PROFIBUS-DP module used for fieldbus communication. Programs and configuration can be transferred to the replacement CPU, while non-volatile internal EEPROM or memory retains the program and configuration without battery power.
For troubleshooting, inspect the SF, RUN and STOP LEDs and read the diagnostic buffer or PLC Status menu in STEP 7-Micro/WIN. The RUN LED indicates that the CPU is executing the user program, while the STOP LED indicates STOP mode. The SF LED indicates a System Fault or Group Fault, including an internal CPU error, system failure or hardware configuration error; severe internal hardware errors may require service or replacement. As a discontinued Siemens PLC, this CPU is primarily relevant to repair, spare-part and legacy system support.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7214-1BD22-0XB0 |
| Model/type | SIMATIC S7-200 CPU 224 |
| Component type | PLC CPU |
| Product family | SIMATIC S7-200 |
| Supply voltage | 120 / 230 V AC |
| Digital inputs | 14 channels, 24 V DC |
| Digital outputs | 10 relay channels |
| Power loss | 10 W |
| Program memory | 8 kB |
| Data memory | 5 kB |
| High-speed counters | 6 channels, up to 30 kHz |
| Expansion capacity | Up to 7 S7-22x expansion modules |
| Integrated communication interface | RS-485 via 9-pin Sub-D |
| Built-in communication protocols | PPI, MPI, Freeport |
| Optional fieldbus communication | PROFIBUS-DP via EM 277 module |
| Product lifecycle status | Discontinued |
Programming and Configuration
The SIMATIC S7-200 CPU 224 is programmed and diagnosed with STEP 7-Micro/WIN. A PC/PPI cable connects the programming system to the CPU through its integrated RS-485 interface. The same connection method supports transfer of the program and configuration to a replacement CPU.
Before commissioning a spare, transfer the machine program and configuration and check the installed hardware layout. The CPU supports up to 7 S7-22x expansion modules, and any EM 277 PROFIBUS-DP module used by the installation must be included in the replacement arrangement. Non-volatile internal EEPROM or memory retains the program and configuration without battery power.
Communication and System Integration
The CPU 224 provides an integrated RS-485 interface through a 9-pin Sub-D connector. Built-in PPI, MPI and Freeport protocols support programming, HMI connections, networking and freely programmable serial communication with compatible devices.
The controller can be expanded with up to 7 S7-22x expansion modules. PROFIBUS-DP connectivity is available through an EM 277 PROFIBUS-DP module, making the installed communication arrangement an important check when matching a replacement CPU.
Diagnostics and Status Indication
The CPU status can be checked directly through the SF, RUN and STOP LEDs. More detailed information is available by reading the diagnostic buffer or reviewing the PLC Status menu in STEP 7-Micro/WIN. An SF indication can identify an internal CPU error, system failure or hardware configuration error; severe internal hardware errors may require service or replacement.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| SF | Lit | System Fault or Group Fault; indicates an internal CPU error, system failure, or hardware configuration error. Severe internal hardware errors may require service or replacement. |
| RUN | Lit | The CPU is in RUN mode and executing the user program. |
| STOP | Lit | The CPU is in STOP mode. |
Replacement and Spare Part Considerations
For a direct replacement, match the Siemens part number 6ES7214-1BD22-0XB0 and verify the 120 / 230 V AC supply, 14 digital 24 V DC inputs, 10 relay outputs and integrated RS-485 interface. Check the S7-22x expansion modules and any EM 277 PROFIBUS-DP module before installing a spare, because the connected hardware arrangement is part of the commissioning requirement.
The 6ES7214-1BD22-0XB0 is discontinued and is used primarily for legacy repair and service. STEP 7-Micro/WIN, a PC/PPI cable and a transferable program and configuration support replacement commissioning. For a modernization project, Siemens recommends considering an S7-1200 solution such as the CPU 1214C AC/DC/Relay; migration and TIA Portal engineering may be required.
Frequently Asked Questions
What is the Siemens 6ES7214-1BD22-0XB0?
It is a Siemens SIMATIC S7-200 CPU 224 PLC CPU with a 120 / 230 V AC power supply, 14 digital 24 V DC inputs, 10 relay outputs and an integrated RS-485 interface.
Which software is used to program the S7-200 CPU 224?
STEP 7-Micro/WIN is used for programming, configuration and diagnostics. A PC/PPI cable connects the software to the CPU through the integrated RS-485 interface.
Which communication protocols does this CPU support?
The integrated RS-485 interface supports PPI, MPI and Freeport communication. PROFIBUS-DP connectivity can be added with an EM 277 PROFIBUS-DP module.
How many expansion modules can be connected?
The SIMATIC S7-200 CPU 224 supports up to 7 S7-22x expansion modules. The installed expansion and communication layout should be matched when commissioning a replacement.
How can the CPU status and faults be checked?
Inspect the SF, RUN and STOP LEDs, then read the diagnostic buffer or review the PLC Status menu in STEP 7-Micro/WIN. SF indicates a System Fault or Group Fault, RUN indicates that the user program is executing, and STOP indicates STOP mode.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



