Siemens 6ES7214-1BD21-0XB0 SIMATIC S7-200 CPU 224 PLC

New 
On request
Refurbished   
4 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC S7-200

The Siemens 6ES7214-1BD21-0XB0 is a SIMATIC S7-200 CPU 224 AC/DC/Relay PLC CPU module for machine control and smaller industrial automation systems. This compact controller combines an AC power supply with 14 integrated 24 V DC digital inputs and 10 relay outputs. The relay outputs support switching for discrete field devices such as sensors, contactors, valves and relay-actuated equipment, with a maximum output current of 0.75 A per channel.

A replacement CPU must match the 1BD21 AC supply and relay-output configuration of the installed unit. The controller uses STEP 7-Micro/WIN for programming, configuration, commissioning, PLC status checks and diagnostics. Programs and parameters can be retained in the internal EEPROM or transferred with a compatible S7-200 memory cartridge. Project transfer is also possible through an S7-200 PC/PPI connection, subject to compatible hardware revisions and memory capacity. The CPU supports SIMATIC S7-200 expansion modules for additional I/O and functionality.

The built-in RS-485 interface uses a 9-pin Sub-D connector and supports PPI, MPI operation as a slave and Freeport communication. During troubleshooting, check the CPU operating mode and use STEP 7-Micro/WIN for a PLC status check, the Information Function and the Diagnostic Buffer. The SF indicator identifies an internal hardware fault, program execution fault or watchdog timeout, while RUN and STOP show the active CPU mode. As a discontinued component from the retired S7-200 product family, this CPU remains relevant for repair, replacement and restoration of installed systems.

Technical Specifications

ManufacturerSiemens
Part number6ES7214-1BD21-0XB0
Model/typeSIMATIC S7-200 CPU 224 AC/DC/Relay
Component typePLC CPU module
Product familySIMATIC S7-200
Power supply typeAC
Digital inputs14 x 24 V DC
Digital outputs10 x relay
Maximum output current per channel0.75 A
Program memory8 kB
Data memory5 kB
Communication interface1 x RS-485, 9-pin Sub-D
Supported communication protocolsPPI, MPI slave, Freeport
Program and parameter storageInternal EEPROM or compatible S7-200 memory cartridge
ExpansionSIMATIC S7-200 expansion modules
Product lifecycleDiscontinued

Programming and Configuration

STEP 7-Micro/WIN is used to program and configure the SIMATIC S7-200 CPU 224, commission the controller and check PLC status. The CPU provides 8 kB of program memory and 5 kB of data memory for control logic, configuration data and operating parameters.

Programs and parameters can be retained in the internal EEPROM or transferred with a compatible S7-200 memory cartridge. A PC/PPI connection can also be used for project transfer and commissioning, subject to compatible hardware revisions and memory capacity. A replacement unit therefore requires the installed project and parameters to be transferred before the machine is returned to operation.

Communication and System Integration

The CPU has one built-in RS-485 interface with a 9-pin Sub-D connector. It supports Siemens PPI communication, MPI operation as a slave and Freeport mode for user-defined serial protocols.

The RS-485 interface supports connections for programming devices, operator panels and compatible S7-200 networked equipment. Verify the interface, communication role and installed configuration when matching a replacement CPU to an existing system.

Diagnostics and Status Indication

STEP 7-Micro/WIN provides a PLC status check, Information Function and Diagnostic Buffer for commissioning and troubleshooting. These tools help assess the CPU operating state and review diagnostic information during a machine fault.

The front-panel SF, RUN and STOP indicators show the CPU condition. SF lights when an internal hardware fault, program execution fault or watchdog timeout is active; RUN indicates RUN mode and STOP indicates STOP mode.

Status LED Indicators

LEDColor/StatusMeaning
SFLights when activeIndicates an internal hardware fault, program execution fault, or watchdog timeout.
RUNIndicates active modeThe CPU is operating in RUN mode.
STOPIndicates active modeThe CPU is operating in STOP mode.

Replacement and Spare Part Considerations

For a direct replacement, verify Siemens part number 6ES7214-1BD21-0XB0 and the SIMATIC S7-200 CPU 224 AC/DC/Relay configuration. The AC supply and relay-output version must be matched to the installed system; DC supply or transistor-output variants are not interchangeable without confirming system requirements.

Before commissioning a spare, transfer the installed program and parameters through the internal EEPROM, a compatible S7-200 memory cartridge or an S7-200 PC/PPI connection. Confirm the STEP 7-Micro/WIN project, compatible hardware revisions, memory capacity and RS-485 communication configuration before placing the CPU into service.

Frequently Asked Questions

What is the Siemens 6ES7214-1BD21-0XB0?

It is a SIMATIC S7-200 CPU 224 AC/DC/Relay PLC CPU module with an AC power supply, 14 integrated 24 V DC digital inputs and 10 relay outputs.

Which communication interfaces and protocols does the CPU support?

The CPU has one RS-485 interface with a 9-pin Sub-D connector. It supports PPI, MPI operation as a slave and Freeport communication.

Which software is used to program and diagnose this S7-200 CPU?

STEP 7-Micro/WIN is used for programming, configuration, commissioning, PLC status checks and diagnostics, including the Information Function and Diagnostic Buffer.

How is the program transferred to a replacement CPU?

The program and parameters can be retained in the internal EEPROM or transferred with a compatible S7-200 memory cartridge. Project transfer can also be completed through an S7-200 PC/PPI connection.

What do the SF, RUN and STOP indicators mean?

SF indicates an internal hardware fault, program execution fault or watchdog timeout. RUN indicates that the CPU is operating in RUN mode, while STOP indicates STOP mode.

What should be checked before ordering a replacement?

Match the complete part number and confirm the 1BD21 AC supply and relay-output configuration, the STEP 7-Micro/WIN project, memory transfer method, hardware revisions and RS-485 communication setup.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.