Siemens 6AV2124-0JC01-0AX0 SIMATIC HMI TP900 Comfort Panel

New 
10+ available within 2 - 3 business days
Refurbished   
1 available for direct collection
2 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Siemens 6AV2124-0JC01-0AX0 SIMATIC HMI TP900 Comfort is a touch-operated HMI panel for visualization, monitoring and control in industrial automation systems. It belongs to the SIMATIC HMI Comfort Panels family and provides a 9-inch widescreen TFT display with 800 x 480 pixel resolution and 16 million colors. The panel operates from a 24 V DC supply and provides 12 MB of configuration memory for project and runtime data.

A replacement TP900 Comfort connects through its integrated RJ45 Ethernet interface for PROFINET communication, with an integrated switch, or through the 9-pin Sub-D interface for MPI and PROFIBUS-DP. Two USB-A host interfaces support peripheral connections, while the USB Mini-B client interface supports programming and project transfer. Commissioning uses WinCC Comfort in TIA Portal V11 or higher. A spare panel may require the project to be transferred or restored from internal Flash memory or an SD card, with the software version, panel firmware and PROFINET, MPI or PROFIBUS-DP addressing aligned with the existing installation.

The panel provides WinCC runtime system diagnostics and integrated system diagnostics through PROFINET or a SIMATIC Controller connection. During replacement and troubleshooting, check the 24 V DC supply, the selected communication interface, network or fieldbus connections and the configured address settings before transferring the project and returning the panel to service. The IP65 front protection rating supports installation on machine panels and control cabinets where protection from dust and water jets is required.

Technical Specifications

ManufacturerSiemens
Part number6AV2124-0JC01-0AX0
Model/typeSIMATIC HMI TP900 Comfort
Component typeHMI panel
Product familySIMATIC HMI Comfort Panels
Display size9 in
Display resolution800 x 480 pixels
Display colors16 million colors
Supply voltage24 V DC
Configuration memory12 MB
Configuration storageInternal Flash memory and SD card support
PROFINET interface1 integrated Ethernet interface with switch, RJ45
MPI/PROFIBUS-DP interfaceIntegrated RS-422/RS-485 interface, 9-pin Sub-D
USB host interfaces2 x USB-A
USB client interface1 x USB Mini-B, 5-pole
Supported communication protocolsPROFINET, PROFIBUS-DP and MPI
Front protection ratingIP65
Rear protection ratingIP20
Operating systemWindows CE 6.0
Configuration softwareWinCC Comfort in TIA Portal V11 or higher

Programming and Configuration

The Siemens TP900 Comfort is configured with WinCC Comfort in TIA Portal V11 or higher. Project transfer is supported through the USB Mini-B client interface and the integrated RJ45 Ethernet interface. The panel includes 12 MB of configuration memory and supports internal Flash memory and SD card storage.

When installing a spare, transfer or restore the existing HMI project and confirm that the TIA Portal software version is compatible with the panel firmware. Project backup and restore support through the internal non-volatile memory and SD card can help prepare the replacement before it is connected to the machine.

Communication and System Integration

The TP900 Comfort integrates with Siemens controller and industrial network architectures through PROFINET, MPI and PROFIBUS-DP. Its RJ45 Ethernet interface supports PROFINET communication and includes an integrated switch. The 9-pin Sub-D interface provides the integrated RS-422/RS-485 connection for MPI and PROFIBUS-DP.

Two USB-A host interfaces are available for peripheral connections, and the USB Mini-B, 5-pole client interface supports programming and project transfer. For a replacement panel, match the communication method used by the existing project and maintain the configured PROFINET IP or MPI/PROFIBUS-DP addressing.

Diagnostics and Status Indication

Diagnostics are available through the WinCC runtime system and through integrated system diagnostics via PROFINET or a SIMATIC Controller connection. These functions support status assessment when the panel is connected to the configured controller or industrial network.

For first-line troubleshooting, check the 24 V DC supply, the selected RJ45 or 9-pin Sub-D connection, network or fieldbus wiring and the configured communication address. Confirm the TIA Portal project and panel firmware alignment before commissioning the replacement.

Replacement and Spare Part Considerations

Verify the replacement against the exact Siemens part number 6AV2124-0JC01-0AX0, the SIMATIC HMI TP900 Comfort model and the interfaces used in the machine. The existing installation may use PROFINET, MPI or PROFIBUS-DP, so the replacement must be commissioned with the corresponding project communication settings and addressing.

A spare panel is not ready for operation until the HMI project has been transferred or restored and the WinCC Comfort in TIA Portal V11 or higher environment is compatible with the panel firmware. Internal Flash memory and SD card support provide options for project storage, backup and restoration during replacement work.

Frequently Asked Questions

What is the Siemens 6AV2124-0JC01-0AX0?

It is the Siemens SIMATIC HMI TP900 Comfort, a 9-inch HMI panel for industrial visualization, monitoring and machine control.

Which communication protocols does the TP900 Comfort support?

The panel supports PROFINET, PROFIBUS-DP and MPI. PROFINET uses the integrated RJ45 Ethernet interface, while MPI and PROFIBUS-DP use the 9-pin Sub-D RS-422/RS-485 interface.

Which software is required to configure the Siemens TP900 Comfort?

Configuration uses WinCC Comfort in TIA Portal V11 or higher. The software version must be compatible with the panel firmware.

How is an existing HMI project transferred to a replacement panel?

The project can be transferred through the USB Mini-B client interface or the integrated RJ45 Ethernet interface, and project storage, backup and restoration are supported through internal Flash memory and an SD card.

What should be checked when commissioning a replacement TP900 Comfort?

Check the 24 V DC supply, the communication interface, network or fieldbus wiring, PROFINET IP or MPI/PROFIBUS-DP addressing, the transferred project and compatibility between the TIA Portal software version and panel firmware.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.