Siemens 6AV2124-0GC13-0AX0 SIMATIC HMI TP700 Comfort Outdoor

New 
9 available within 2 - 3 business days
Refurbished   
1 available for direct collection
4 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Siemens 6AV2124-0GC13-0AX0 is a SIMATIC HMI TP700 Comfort Outdoor operator panel for process visualization and machine control. It belongs to the SIMATIC HMI Comfort Panels Outdoor family and combines a 7-inch, optically bonded TFT widescreen display with a 16:9 aspect ratio, 800 x 480 pixel resolution and 16,777,216 colors. The display is designed to improve readability in outdoor daylight and presents machine data, alarms, trends, recipes, diagnostics and operating controls.

Replacement commissioning depends on the communication and configuration used in the machine. The panel provides two integrated RJ45 Industrial Ethernet ports with a switch for PROFINET, one combined 9-pin Sub-D RS-422/RS-485 interface for MPI and PROFIBUS-DP, two USB 2.0 Type A host ports, one USB Mini-B device interface and two SD card slots. Configuration is performed with WinCC Comfort in TIA Portal V13 SP1 or higher. The 12 MB non-volatile flash memory and SIMATIC HMI SD memory card support automatic backup and restore, but the replacement unit still requires compatible firmware, the correct project or backup, and matching PROFINET device name and IP address requirements.

For troubleshooting, the TP700 Comfort Outdoor provides TIA Portal and WinCC Online Diagnostics, the SIMATIC ProSave tool and an integrated on-screen system alarm buffer. On-screen system alarms can indicate system errors, communication failures and runtime events. During a replacement check, confirm the 24 V DC supply, the selected PROFINET, MPI or PROFIBUS-DP connection, the transferred configuration and the firmware compatibility before returning the HMI to service.

Technical Specifications

ManufacturerSiemens
Part number6AV2124-0GC13-0AX0
Model/typeSimatic HMI TP700 Comfort
Component typeHMI operator panel
Product familySIMATIC HMI Comfort Panels Outdoor
Display size7 in
Display typeTFT widescreen, optically bonded
Display aspect ratio16:9
Display resolution800 x 480 pixels
Display colors16,777,216 colors
Processorx86 CPU
User configuration memory12 MB
Real-time clock backup6 weeks
Rated supply voltage24 V DC
Permitted supply voltage range19.2 to 28.8 V DC
Rated current consumption0.7 A
Power consumption12 W
PROFINET interfaces2 integrated Industrial Ethernet ports with switch, RJ45
MPI and PROFIBUS-DP interface1 combined RS-422/RS-485 interface, 9-pin Sub-D
USB host interfaces2 USB 2.0 Type A
USB device interface1 USB Mini-B
Supported communication protocolsPROFINET, PROFIBUS-DP, MPI
SD card slots2
Audio interfaceIntegrated speaker and audio line input/output
Configuration softwareWinCC Comfort in TIA Portal V13 SP1 or higher
Configuration storageNon-volatile flash memory with optional SD card backup and restore

Programming and Configuration

The TP700 Comfort Outdoor is configured with WinCC Comfort in TIA Portal V13 SP1 or higher. The HMI project is stored in non-volatile flash memory, which provides 12 MB for user configuration data.

A SIMATIC HMI SD memory card can be used for automatic backup and restore. For a replacement panel, transfer the correct project or restore the appropriate backup, then align the firmware requirements and the PROFINET device name and IP address with the machine configuration.

Communication and System Integration

Two integrated RJ45 Industrial Ethernet ports with a built-in switch provide PROFINET connectivity for Siemens automation systems and PLC-based control panels. The panel also has one combined RS-422/RS-485 interface on a 9-pin Sub-D connector for MPI and PROFIBUS-DP connections.

Service and peripheral connectivity is provided by two USB 2.0 Type A host ports and one USB Mini-B device interface. Two SD card slots support data storage, project transfer and system backup functions. When replacing the panel, match the interface used by the machine and restore the corresponding communication configuration.

Diagnostics and Status Indication

Troubleshooting can be performed with TIA Portal and WinCC Online Diagnostics or the SIMATIC ProSave tool. The integrated on-screen system alarm buffer displays system alarms for system errors, communication failures and runtime events, helping technicians distinguish configuration, network and runtime issues during commissioning.

Replacement and Spare Part Considerations

Verify the complete part number 6AV2124-0GC13-0AX0 and the TP700 Comfort Outdoor model before ordering a spare. The replacement must match the installed communication arrangement, including PROFINET, MPI or PROFIBUS-DP, and must meet the required firmware compatibility.

A spare panel may require project transfer or SD card backup restoration before it can operate in the machine. Check the 24 V DC supply, restore the configuration, align the PROFINET device name and IP address, and confirm communication with the Siemens automation system before releasing the equipment.

Frequently Asked Questions

What is Siemens 6AV2124-0GC13-0AX0?

It is a Siemens SIMATIC HMI TP700 Comfort Outdoor operator panel with a 7-inch optically bonded TFT widescreen display for machine control and process visualization.

Which communication protocols does the TP700 Comfort Outdoor support?

The panel supports PROFINET through two integrated RJ45 Industrial Ethernet ports with a switch, plus MPI and PROFIBUS-DP through one combined RS-422/RS-485 9-pin Sub-D interface.

Which software is required to configure this Siemens HMI?

Configuration uses WinCC Comfort in TIA Portal V13 SP1 or higher.

How can the HMI configuration be transferred to a replacement panel?

The panel supports automatic backup and restore with a SIMATIC HMI SD memory card. The replacement also requires compatible firmware, the correct project or backup, and matching PROFINET device name and IP address requirements.

Which tools can be used to diagnose the TP700 Comfort Outdoor?

TIA Portal and WinCC Online Diagnostics, SIMATIC ProSave and the integrated on-screen system alarm buffer can be used for diagnostics. System alarms cover system errors, communication failures and runtime events.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.