Siemens 6AV2123-2GB03-0AX0 KTP700 Basic HMI Panel

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6AV2123-2GB03-0AX0 is a SIMATIC HMI KTP700 Basic color PN operator panel for machine status visualization and operator control. It belongs to the SIMATIC HMI Basic Panels, 2nd Generation family and combines a 7-inch TFT color display with 800 × 480 pixel resolution and 65,536 colors. Key and touch operation provide two ways to interact with operating screens, process data, alarms and recipes. The panel uses a 24 V DC supply and is suited to machine-level operator stations, packaging and production-line equipment, conveyor and material-handling systems, and compact process-control interfaces.
For system integration, this KTP700 Basic has a built-in PROFINET Industrial Ethernet interface with an RJ45 connector and a built-in USB interface for data transfer and peripherals. Engineering software requirements include WinCC Basic V13 or newer or STEP 7 Basic V13 or newer, within a TIA Portal engineering environment that supports the panel. A project can be downloaded from an engineering PC to the HMI over the PROFINET network. A replacement therefore requires the compatible project and engineering setup, with firmware compatibility checked before commissioning.
When replacing the 6AV2123-2GB03-0AX0, match the complete Siemens part number and the PN interface variant rather than selecting the PROFIBUS DP variant 6AV2123-2GA03-0AX0. Confirm the 24 V DC supply, RJ45 PROFINET connection, project transfer method and engineering software before installation. Internal non-volatile flash memory supports project storage, with backup and restore capability at the Basic Panels family level. The backlight MTBF is 20,000 h at 25 °C ambient temperature, which is relevant when assessing an existing panel for replacement or repair.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6AV2123-2GB03-0AX0 |
| Model/type | SIMATIC HMI KTP700 Basic color PN |
| Component type | HMI operator panel |
| Product family | SIMATIC HMI Basic Panels, 2nd Generation |
| Supply voltage | 24 V DC |
| Display size | 7 in |
| Display type | TFT color display |
| Display resolution | 800 × 480 pixel |
| Display colors | 65,536 |
| Operator input | Combined key and touch operation |
| PROFINET interface | Built-in RJ45 interface |
| USB interface | Built-in USB interface |
| Communication protocol | PROFINET Industrial Ethernet |
| Minimum engineering software | WinCC Basic V13 or STEP 7 Basic V13 |
| Project storage | Internal non-volatile flash memory; backup and restore supported |
| Backlight MTBF | 20,000 h at 25 °C ambient temperature |
Programming and Configuration
The KTP700 Basic is engineered with WinCC Basic V13 or newer or STEP 7 Basic V13 or newer in a compatible TIA Portal environment. These software requirements should be matched to the panel and the existing project before a replacement is commissioned.
Project transfer can be performed from an engineering PC to the HMI over the PROFINET network. The panel uses internal non-volatile flash memory for project storage, and backup and restore are supported at the SIMATIC HMI Basic Panels, 2nd Generation family level.
A spare panel requires more than the correct enclosure and part number: prepare the compatible HMI project, confirm the engineering software version, establish the PROFINET connection and transfer the project before returning the machine to operation.
Communication and System Integration
Communication with the automation system uses PROFINET Industrial Ethernet through the built-in RJ45 interface. This is the color PN version of the KTP700 Basic and should be matched with installations using the PROFINET variant.
The built-in USB interface supports data transfer and peripherals. For commissioning, connect the engineering PC to the panel through the PROFINET network and download the compatible project using the selected Siemens engineering software.
The part number 6AV2123-2GB03-0AX0 identifies the PROFINET version. It should not be interchanged with the PROFIBUS DP variant 6AV2123-2GA03-0AX0 when checking a replacement for an existing installation.
Replacement and Spare Part Considerations
Verify the exact part number 6AV2123-2GB03-0AX0 and the SIMATIC HMI KTP700 Basic color PN type before ordering a spare. The PROFINET interface, 24 V DC supply, 7-inch display format and combined key/touch operation should correspond to the failed panel.
Before commissioning, prepare the compatible HMI project and confirm WinCC Basic V13 or newer or STEP 7 Basic V13 or newer. The replacement project can be transferred from an engineering PC over PROFINET, while internal non-volatile flash memory supports project storage and family-level backup and restore.
Do not substitute the PROFIBUS DP variant 6AV2123-2GA03-0AX0 for this PROFINET panel without confirming the machine architecture. Project compatibility, firmware compatibility, network connection and correct power supply should be checked before the spare is placed into service.
Frequently Asked Questions
What is the Siemens 6AV2123-2GB03-0AX0?
It is a Siemens SIMATIC HMI KTP700 Basic color PN operator panel from the SIMATIC HMI Basic Panels, 2nd Generation family. It provides machine visualization and operator control through a 7-inch TFT color display with key and touch operation.
Which software is required to configure the KTP700 Basic?
Configuration requires WinCC Basic V13 or newer or STEP 7 Basic V13 or newer in a TIA Portal engineering environment that supports the panel.
How is a project transferred to the replacement HMI?
A project can be downloaded from an engineering PC to the panel over the PROFINET network. The engineering software, project and firmware must be compatible with the replacement panel.
Does the 6AV2123-2GB03-0AX0 use PROFINET or PROFIBUS?
The 6AV2123-2GB03-0AX0 is the PROFINET version, with a built-in RJ45 interface for PROFINET Industrial Ethernet. The PROFIBUS DP variant is 6AV2123-2GA03-0AX0.
What display and operator controls does the KTP700 Basic have?
The panel has a 7-inch TFT color display with 800 × 480 pixel resolution and 65,536 colors. It combines key and touch operation.
What should be checked before installing this HMI spare?
Check the exact part number, PROFINET variant, 24 V DC supply, RJ45 network connection, compatible engineering software, HMI project and firmware compatibility before commissioning.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



