Siemens 6ES7400-1JA01-0AA0 SIMATIC S7-400 UR2 PLC Rack

New 
7 available within 2 - 3 business days
Refurbished   
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC S7-400

The Siemens 6ES7400-1JA01-0AA0 is a SIMATIC S7-400 UR2 PLC rack that provides the mechanical structure and backplane connectivity for S7-400 automation systems. Its nine single-width slots accommodate compatible S7-400 CPUs, power supply modules, I/O modules, and communication modules. The rack is used in centralized and distributed S7-400 configurations for industrial control cabinets and plant automation systems.

The UR2 rack integrates the S7-400 peripheral backplane bus, or P bus, for communication with I/O modules and the communication backplane bus, or C bus, for compatible communication modules and system components. It supports up to two pluggable redundant power supplies. Hardware slot assignment and bus configuration are managed with Siemens STEP 7 hardware configuration software when preparing or commissioning an S7-400 installation.

For a replacement, match the Siemens 6ES7400-1JA01-0AA0 part number and confirm that the existing system requires a nine-slot S7-400 UR2 rack. Check the planned CPU, power supply, I/O, and communication modules against the S7-400 backplane structure before installation. The rack is relevant for maintaining or expanding established S7-400 systems where the correct slot layout, P bus, C bus, and redundant power supply arrangement must be retained.

Technical Specifications

ManufacturerSiemens
Part number6ES7400-1JA01-0AA0
Model/typeSIMATIC S7-400 UR2 Rack
Product familySIMATIC S7-400
Component typePLC rack
Number of slots9 single-width slots
Maximum redundant power supplies2 power supplies
Peripheral backplane busP bus
Communication backplane busC bus
Hardware configuration softwareSiemens STEP 7
System configurationCentralized and distributed S7-400 configurations

Programming and Configuration

The Siemens 6ES7400-1JA01-0AA0 is configured as part of a SIMATIC S7-400 system using Siemens STEP 7 hardware configuration software. The rack layout, installed modules, slot assignment, and backplane bus configuration must correspond with the physical S7-400 installation.

During replacement or expansion, verify the positions of the CPU, power supply modules, I/O modules, and communication modules in the nine available single-width slots. Where redundant power is used, the rack configuration must also reflect the installation of up to two pluggable redundant power supplies.

Communication and System Integration

The UR2 rack provides the S7-400 backplane connections required for system integration. The P bus supports communication with I/O modules, while the C bus supports communication with compatible communication modules and system components.

The rack accepts compatible SIMATIC S7-400 CPUs, power supply modules, I/O modules, and communication modules across its nine single-width slots. It can form part of centralized or distributed S7-400 automation architectures, provided the installed modules match the S7-400 backplane structure.

Replacement and Spare Part Considerations

Before installing a spare, verify the exact part number, the SIMATIC S7-400 family, the UR2 rack type, and the requirement for nine single-width slots. Confirm that the existing CPU, power supplies, I/O modules, and communication modules are compatible with the S7-400 P bus and C bus backplane arrangement.

The replacement rack should be configured in Siemens STEP 7 with the same physical slot assignment and bus configuration required by the installation. If the system uses redundant power, confirm that the intended arrangement supports up to two pluggable redundant power supplies before commissioning the replacement.

This rack is suited to maintaining or expanding existing S7-400 control systems in process manufacturing, discrete manufacturing, water and wastewater treatment, energy, and infrastructure automation. Matching the rack geometry and backplane connectivity is essential when selecting a spare for an established installation.

Frequently Asked Questions

What is the Siemens 6ES7400-1JA01-0AA0?

It is a Siemens SIMATIC S7-400 UR2 PLC rack with nine single-width slots for compatible S7-400 CPUs, power supplies, I/O modules, and communication modules.

Which buses are integrated in the S7-400 UR2 rack?

The rack provides the P bus peripheral backplane bus for I/O modules and the C bus communication backplane bus for compatible communication modules and system components.

How many power supplies can the 6ES7400-1JA01-0AA0 support?

The UR2 rack supports up to two pluggable redundant power supplies.

Which software is used to configure this Siemens S7-400 rack?

Hardware slot assignment and bus configuration are managed with Siemens STEP 7 hardware configuration software.

What should be checked before replacing an S7-400 UR2 rack?

Verify the exact part number, the nine-slot UR2 layout, the installed S7-400 CPU, power supply, I/O, and communication modules, and the required P bus, C bus, and redundant power supply arrangement.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.