Siemens 6ES7407-0KA02-0AA0 Simatic S7-400 PS407 Power Supply

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7407-0KA02-0AA0 is a Simatic S7-400 PS407 power supply module for industrial automation control racks. It delivers regulated 5 V DC at up to 10 A for S7-400 rack electronics and accepts 120/230 V AC or DC plant power. The module provides 20 ms of mains buffering for brief voltage interruptions and supports monitored rack power for SIMATIC S7-400 CPU and module installations.
The PS407 connects directly to the S7-400 rack backplane and is installed in slot 1, the leftmost rack position. It occupies two rack slots, so the rack position and available space must match the replacement unit. STEP 7 or TIA Portal HW Config can be used for S7-400 power supply monitoring configuration. Replacement commissioning also includes checking the rack connection and backup battery condition; a 3.6 V lithium backup battery can be replaced when required to help retain CPU RAM data during a main power interruption.
Front-panel indicators show the condition of the 5 V DC and 24 V DC outputs, internal hardware faults, and backup battery positions. Mains and battery failure conditions can be reported to the S7-400 CPU through Organization Block OB81. An INTF indication identifies an internal board-level or hardware failure requiring repair or replacement; ABC Industrial Parts can support a repair or tested exchange route when this type of fault prevents continued operation.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7407-0KA02-0AA0 |
| Model/type | Simatic S7-400, Power Supply PS407 |
| Product family | SIMATIC S7-400 |
| Component type | Power supply module |
| Output voltage | 5 V DC |
| Output current | 10 A |
| Rated supply voltage, AC | 120 / 230 V AC |
| Rated supply voltage, DC | 120 / 230 V DC |
| Line frequency | 47–63 Hz |
| Mains buffering time | 20 ms |
| Input current at 120 V DC | 1 A |
| Input current at 230 V DC | 0.5 A |
| Input current at 120 V AC | 0.9 A |
| Input current at 230 V AC | 0.5 A |
| Maximum inrush current | 63 A |
| Rack installation position | Slot 1, leftmost position |
| Rack width | 2 slots |
| Backplane interface | Direct S7-400 rack backplane connector |
Programming and Configuration
STEP 7 or TIA Portal HW Config can be used to configure S7-400 power supply monitoring. The replacement must be installed in the correct S7-400 rack position, with the module occupying slot 1 and two rack slots.
During commissioning, check the direct connection to the S7-400 rack backplane and confirm that the rack power configuration matches the installed PS407. CPU diagnostics for mains and backup battery failure can be processed through Organization Block OB81.
The backup battery condition should be checked as part of replacement work. A 3.6 V lithium backup battery can be replaced when required to help retain CPU RAM data during a main power interruption.
Diagnostics and Status Indication
The PS407 uses front-panel indicators to show 5 V DC and 24 V DC output status, internal hardware faults, and backup battery conditions. The 5VDC and 24VDC indicators are on when their respective output voltage is within the normal range and off on failure.
S7-400 CPU system diagnostics can process mains and backup battery failure conditions through Organization Block OB81. The BAF, BATT1F, and BATT2F indicators identify backup battery conditions, while INTF indicates an internal board-level or hardware failure requiring repair or replacement.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| INTF | Indicates an internal board-level or hardware failure requiring repair or replacement. | |
| 5VDC | Green - On when the 5 V DC output is within the normal range; off on failure | Indicates the condition of the 5 V DC output voltage. |
| 24VDC | Green - On when the 24 V DC output is within the normal range; off on failure | Indicates the condition of the 24 V DC output voltage. |
| BAF | On when the backup battery voltage is low or the battery is missing | Indicates a backup battery failure condition. |
| BATT1F / BATT2F | On for a failure affecting battery slot 1 or battery slot 2 | Identifies an individual backup battery failure for the corresponding battery slot. |
Replacement and Spare Part Considerations
For a PS407 replacement, match the exact Siemens part number 6ES7407-0KA02-0AA0 and confirm that the S7-400 rack has the required slot 1 position and space for a two-slot module. The replacement connects through the direct S7-400 rack backplane connector.
Check the plant supply arrangement before commissioning: this PS407 accepts 120/230 V AC or DC and operates at 47–63 Hz. Confirm the rack power configuration in STEP 7 or TIA Portal HW Config and check the 5 V DC and 24 V DC status indicators after installation.
If the INTF indicator identifies an internal board-level or hardware failure, repair or a tested exchange unit may be more suitable than field-level troubleshooting. Backup battery status should also be checked, including the BAF, BATT1F, and BATT2F indications.
Frequently Asked Questions
What is the Siemens 6ES7407-0KA02-0AA0?
It is a Siemens Simatic S7-400 PS407 power supply module that provides regulated 5 V DC at up to 10 A for S7-400 rack electronics.
What input power does the PS407 accept?
The module accepts 120/230 V AC or DC input and operates at a line frequency of 47–63 Hz.
Where is the PS407 installed in an S7-400 rack?
It is installed in slot 1, the leftmost rack position, and occupies two rack slots.
How are PS407 faults and battery conditions indicated?
Front-panel indicators show 5 V DC and 24 V DC output status, internal hardware faults, and backup battery conditions. Mains and battery failure conditions can also be processed by the S7-400 CPU through OB81.
Which software is used for PS407 monitoring configuration?
STEP 7 or TIA Portal HW Config can be used for S7-400 power supply monitoring configuration.
What should be checked when replacing this S7-400 power supply?
Confirm the exact part number, slot 1 installation position, two-slot rack width, direct backplane connection, 120/230 V AC or DC supply, configuration in STEP 7 or TIA Portal HW Config, and backup battery status.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



