Siemens 6ES7407-0DA02-0AA0 SIMATIC S7-400 PS407 Power Supply

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7407-0DA02-0AA0 is the SIMATIC S7-400 PS 407 4A power supply module for compatible S7-400 PLC racks. Installed in one rack slot, it supplies the S7-400 backplane with regulated 5 V DC at up to 4 A and auxiliary 24 V DC at up to 0.5 A for CPUs and signal modules. The PS407 accepts 85-264 V AC or 88-300 V DC and supports rated 120 or 230 V operation, making it suitable for existing S7-400 control cabinets using compatible rack power positions.
A replacement connects to the S7-400 backplane through the dedicated backplane connector, while mains wiring is completed at the screw terminals. Before commissioning, check the rack and PS407 position, the backplane power requirements and the 3.6 V, 2.2 Ah lithium AA backup battery. STEP 7 or TIA Portal can be used for S7-400 hardware configuration and power supply monitoring. The 20 ms mains buffering time supports continued rack operation during brief supply interruptions.
Front-panel indicators provide first-line service information for the S7-400 rack power supply. A solid green 5VDC or 24VDC indicator confirms that the respective output is present and within tolerance. INTF indicates an internal power-supply hardware fault or a secondary voltage outside tolerance; this board-level failure is not field-serviceable and requires unit replacement. BAF indicates a missing, depleted or short-circuited backup battery, so the battery condition and rack power connections should be checked during troubleshooting.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7407-0DA02-0AA0 |
| Model/type | SIMATIC S7-400 PS 407 4A |
| Component type | Power supply module |
| Product family | SIMATIC S7-400 |
| AC input voltage range | 85-264 V AC |
| DC input voltage range | 88-300 V DC |
| Rated input voltage | 120 or 230 V AC/DC |
| Input frequency | 47-63 Hz |
| Input current at 120 V DC | 0.35 A |
| Input current at 230 V DC | 0.19 A |
| Input current at 120 V AC | 0.42 A |
| Input current at 230 V AC | 0.22 A |
| Maximum inrush current | 8.5 A |
| Maximum leakage current | 5 mA |
| Backplane output voltage | 5 V DC |
| Maximum 5 V DC output current | 4 A |
| Backplane auxiliary output voltage | 24 V DC |
| Maximum 24 V DC output current | 0.5 A |
| Mains buffering time | 20 ms |
| Typical active power input | 52 W |
| Typical power loss | 20 W |
| Rack slot requirement | 1 slot |
| Backplane interface | S7-400 backplane connector |
| Mains input connection | Screw terminals |
| Backup battery | 3.6 V, 2.2 Ah lithium AA cell |
Programming and Configuration
The PS407 is configured and monitored as part of an S7-400 system using STEP 7 or TIA Portal engineering tools. Hardware configuration should reflect the installed S7-400 rack and compatible power supply position.
When commissioning a replacement, verify the rack arrangement, the required 5 V DC and 24 V DC backplane loads and the condition of the 3.6 V, 2.2 Ah lithium AA backup battery. The power supply does not replace the CPU program; S7-400 hardware configuration and system commissioning remain part of the replacement process.
Communication and System Integration
The Siemens 6ES7407-0DA02-0AA0 integrates with compatible SIMATIC S7-400 racks through the dedicated S7-400 backplane connector. It provides the rack bus with 5 V DC at up to 4 A and an auxiliary 24 V DC output at up to 0.5 A for connected backplane modules.
Mains input is connected through screw terminals. Verify the installed rack, power supply position and backplane current demand before fitting a spare. STEP 7 or TIA Portal supports S7-400 hardware configuration and power supply monitoring.
Diagnostics and Status Indication
Use the front-panel INTF, 5VDC, 24VDC and BAF indicators for initial troubleshooting. Solid green 5VDC and 24VDC indicators show that the respective output is present and within tolerance.
INTF identifies an internal power-supply hardware fault or a secondary voltage outside tolerance. This is a board-level failure that is not field-serviceable and requires unit replacement. BAF indicates that the backup battery is missing, depleted or short-circuited; also check the S7-400 backplane supply outputs and rack power connections.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| INTF | Indicates an internal power supply hardware fault or a secondary voltage outside tolerance. An active indicator identifies a board-level failure that is not field-serviceable and requires unit replacement. | |
| 5VDC | Green - Solid | The 5 V DC output is present and within tolerance. |
| 24VDC | Green - Solid | The 24 V DC output is present and within tolerance. |
| BAF | Indicates that the backup battery is missing, depleted or short-circuited. |
Replacement and Spare Part Considerations
For a Siemens S7-400 power supply replacement, match the exact part number 6ES7407-0DA02-0AA0 and the SIMATIC S7-400 PS 407 4A type. Confirm that the rack has a compatible PS407 power supply position and that the connected backplane modules require the available 5 V DC and 24 V DC output capacity.
Before commissioning the spare, check the mains input range, screw-terminal wiring, backplane connector, rack power connections and backup battery. The replacement provides 5 V DC at up to 4 A and 24 V DC at up to 0.5 A, with a 20 ms mains buffering time. STEP 7 or TIA Portal can be used to configure and monitor the S7-400 hardware after installation.
Frequently Asked Questions
What is the Siemens 6ES7407-0DA02-0AA0?
It is the SIMATIC S7-400 PS 407 4A power supply module for compatible S7-400 PLC racks. It supplies 5 V DC at up to 4 A and 24 V DC at up to 0.5 A to the backplane.
What input voltage does the PS407 accept?
The module accepts 85-264 V AC or 88-300 V DC, with rated 120 or 230 V operation. The AC input frequency is 47-63 Hz.
How does the PS407 connect to an S7-400 rack?
The module occupies one rack slot and connects to the S7-400 backplane through its dedicated backplane connector. Mains wiring is completed through screw terminals.
What do the 5VDC and 24VDC indicators mean?
A solid green 5VDC or 24VDC indicator means that the respective output is present and within tolerance.
What does the INTF indicator mean on the PS407?
INTF indicates an internal power-supply hardware fault or a secondary voltage outside tolerance. This board-level failure is not field-serviceable and requires unit replacement.
Which backup battery is used with this S7-400 power supply?
The battery compartment accommodates one 3.6 V, 2.2 Ah lithium AA cell. BAF indicates that the battery is missing, depleted or short-circuited.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



