Siemens 6EP1931-2FC01 SITOP Power DC-UPS Module 40

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6EP1931-2FC01 is a SITOP power DC-UPS Module 40 for maintaining 24 V DC power in industrial automation systems during mains interruptions. This 40 A DC-UPS module works with an external Siemens SITOP lead-acid battery module to buffer connected PLCs, automation control cabinets, process monitoring equipment and communication systems. It provides a nominal 24 V DC output and mounts on an EN 50022 DIN rail.
A replacement unit must be matched to the 24 V DC system, the external battery module and the required output load. The module accepts a 23.5 to 26 V DC supply range, provides a rated output current of 40 A and uses front-panel DIP or selector switches for buffer-time and threshold settings. Before commissioning a spare, check the battery arrangement, wiring, selector settings and compatibility with the Siemens SITOP DC-UPS successor 6EP1931-2FC21.
The 6EP1931-2FC01 provides local operating-state indication through four integrated front-panel status LEDs and remote monitoring through potential-free floating changeover relay contacts with screw terminals. Normal operation, buffer mode, battery charging status and alarm or fault conditions can be evaluated locally or by a PLC, control system or supervisory circuit. A red LED or constant alarm state indicates a battery fault or internal hardware malfunction; repair or exchange of the DC-UPS module may then be more practical than continued field troubleshooting.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6EP1931-2FC01 |
| Model/type | SITOP power DC-UPS Module 40, 24 V DC |
| Component type | DC-UPS module |
| Product family | SITOP power |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 23.5 to 26 V DC |
| Nominal output voltage | 24 V DC |
| Maximum output voltage | 27.3 V DC |
| Rated output current | 40 A |
| Maximum input current | 42.6 A |
| Mounting | DIN rail EN 50022 |
| Remote status interface | Potential-free floating changeover contacts via screw terminals |
| Operating modes | Normal mode, buffer mode and alarm status signaling |
| Configuration method | Front-panel DIP or selector switches for buffer time and threshold settings |
| Lifecycle status | Discontinued |
Programming and Configuration
Configuration is performed directly on the module using front-panel DIP or selector switches. These hardware settings cover buffer time and threshold values, so the switch positions should be recorded before removing a failed unit and reproduced on the replacement.
The external Siemens SITOP lead-acid battery module must be considered when preparing the spare. Select the battery arrangement according to the connected load and required backup duration, then check the 24 V DC supply, wiring and selector settings before returning the cabinet to service.
Communication and System Integration
The module integrates into 24 V DC industrial power systems and supplies buffered power to automation loads up to a rated output current of 40 A. It is intended for cabinet installations using EN 50022 DIN rail mounting and an external Siemens SITOP lead-acid battery module.
Remote operating-state evaluation is available through potential-free floating changeover contacts connected via screw terminals. A PLC, control system or supervisory circuit can use these relay contacts to monitor normal operation, buffer mode and alarm status without requiring a network protocol.
Diagnostics and Status Indication
Four integrated front-panel status LEDs provide visual indication of the DC-UPS operating state, including normal operation, buffer mode, battery charging status and fault or alarm conditions. Manual verification of the DIP or selector switch settings is also part of the diagnostic process.
Remote status evaluation is possible through the potential-free floating changeover relay contacts. A red LED or constant alarm state indicates a battery fault or internal hardware malfunction; check the battery, wiring and switch settings before choosing repair or a tested exchange unit.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Status LEDs | Four integrated LEDs indicate operating states | Indicates normal operation, buffer mode, battery charging status, and fault or alarm conditions. A red LED or constant alarm state indicates a battery fault or internal hardware malfunction. |
Replacement and Spare Part Considerations
The Siemens 6EP1931-2FC01 is discontinued and has been succeeded by the Siemens SITOP DC-UPS module 6EP1931-2FC21. When replacing the older module, verify the exact part number, 24 V DC system requirements, rated load, external Siemens SITOP lead-acid battery module, wiring and EN 50022 DIN rail installation.
A spare is not ready for service until the front-panel DIP or selector switch settings have been checked and the battery and remote relay wiring have been matched. Confirm the required buffer-time and threshold settings, then use the four status LEDs and potential-free changeover contacts to verify operation after commissioning.
Frequently Asked Questions
What is the Siemens 6EP1931-2FC01 used for?
It is a SITOP power DC-UPS module that maintains 24 V DC power for PLCs, automation control cabinets, process monitoring equipment and communication systems during mains interruptions.
What output current does the 6EP1931-2FC01 provide?
The module has a rated output current of 40 A and provides a nominal output voltage of 24 V DC.
What must be checked before commissioning a replacement?
Check the 24 V DC supply, connected load, external Siemens SITOP lead-acid battery module, wiring, front-panel DIP or selector switch settings, buffer-time and threshold settings, and remote relay connections.
How does the module indicate faults and operating states?
Four integrated front-panel status LEDs indicate normal operation, buffer mode, battery charging status and alarm or fault conditions. Potential-free floating changeover contacts provide remote status monitoring.
What is the successor to Siemens 6EP1931-2FC01?
The Siemens SITOP DC-UPS successor is 6EP1931-2FC21. Compatibility requirements should be checked before using it as a replacement.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



