Schneider Electric TSXPSY2600 Modicon Premium AC Power Supply Module

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Schneider Electric TSXPSY2600 is a Modicon Premium AC power supply module for Modicon Premium TSX RKY PLC racks. Installed in the rack's dedicated power supply position, it provides 5 V DC logic power to the backplane and a 24 V DC auxiliary supply for sensor or relay circuits. The module accepts a nominal 100-240 V AC input, delivers 26 W of total useful secondary output power, and uses front-panel OK/100-240V, 5V, and 24V status indicators for quick identification of input and output conditions.
A replacement TSXPSY2600 connects to the rack through the Modicon Premium backplane connector, while primary and auxiliary wiring is made through a screw-terminal block. Before commissioning a spare, match the TSX RKY rack position, input voltage, and system power demand. The 5 V DC and 24 V DC output ratings are individual rail ratings, while the combined total useful secondary power is limited to 26 W. TSXPSY2600M service replacement applications require system verification before installation.
For troubleshooting, first check the OK/100-240V, 5V, and 24V front-panel indicators, then verify the AC supply, rack connection, and auxiliary output circuits. The rack backplane and power supply status can also be monitored through the CPU controller using PL7 Pro, Unity Pro, or EcoStruxure Control Expert. As a discontinued Modicon Premium component, the TSXPSY2600 is intended for legacy-system maintenance, repair, and spare-part replacement where the rack, wiring, and power budget match.
Technical Specifications
| Manufacturer | Schneider Electric |
| Part number | TSXPSY2600 |
| Model/type | Modicon Premium AC power supply module |
| Product family | Modicon Premium |
| Component type | Power supply module |
| Primary supply voltage | 100-240 V AC |
| Operating voltage limits | 85-264 V AC |
| Input frequency | 50/60 Hz nominal; 47-63 Hz operating |
| Total useful secondary output power | 26 W |
| 5 V DC output power rating | 25 W |
| 24 V DC output power rating | 15 W |
| Input current | 0.5 A at 100 V AC; 0.3 A at 240 V AC |
| Inrush current | 30 A at 100 V AC; 75 A at 240 V AC |
| Insulation resistance | Minimum 100 MΩ |
| Backplane power function | Provides 5 V DC logic power to the rack bus and 24 V DC auxiliary sensor supply |
| Primary and auxiliary connections | Screw-terminal block |
| Rack backplane interface | Modicon Premium backplane connector |
| Mounting position | Dedicated power supply position in Modicon Premium TSX RKY rack |
| Ingress protection rating | IP20 |
| Lifecycle status | Discontinued; maintained for service and spare-part support |
Programming and Configuration
PL7 Pro, Unity Pro, and EcoStruxure Control Expert can be used for Modicon Premium rack configuration and power supply diagnostics. These tools support checks of the rack backplane and power supply status through the CPU controller.
The TSXPSY2600 is a rack power supply module rather than a programmable controller. Replacement commissioning focuses on installing it in the dedicated TSX RKY power supply position, transferring the existing terminal connections, and confirming that the rack configuration and total power demand are suitable.
Communication and System Integration
The TSXPSY2600 interfaces with the Modicon Premium system through the dedicated backplane connector in the TSX RKY rack. This connection supplies 5 V DC logic power to the rack bus and supports monitoring of rack backplane and power supply status through the CPU controller.
Primary AC input and auxiliary 24 V DC wiring use a screw-terminal block. The 24 V DC output supports auxiliary sensor or relay circuits, while the rack installation must remain within the 26 W total useful secondary power capacity.
Diagnostics and Status Indication
Three green front-panel indicators provide direct checks of the power supply. OK/100-240V shows the presence of primary AC line voltage and the condition of the internal AC/DC conversion stage. The 5V indicator confirms the rack logic supply, and the 24V indicator confirms that the auxiliary output is within the valid range.
For first-line troubleshooting, compare the LED states with the AC input, backplane connection, and auxiliary wiring. An unlit OK/100-240V indicator can indicate lost input power or an internal power supply failure; an unlit 5V indicator can indicate a 5 V DC overload, short circuit, or internal hardware failure; and an unlit 24V indicator can indicate an auxiliary 24 V output short circuit or internal power-stage failure. PL7 Pro, Unity Pro, and EcoStruxure Control Expert can be used for rack configuration and power supply diagnostics.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| OK/100-240V | Green - On or Off | Green indicates that primary AC line voltage is present and the internal AC/DC conversion stage is healthy. Off indicates loss of input AC power or an internal power supply failure. |
| 5V | Green - On or Off | Green indicates that the 5 V DC logic output to the backplane is healthy. Off indicates a 5 V DC overload, short circuit, or internal hardware failure. |
| 24V | Green - On or Off | Green indicates that the auxiliary 24 V DC output is within the valid range. Off indicates an auxiliary 24 V output short circuit or internal power-stage failure. |
Replacement and Spare Part Considerations
For a TSXPSY2600 replacement, verify the Schneider Electric part number, the Modicon Premium TSX RKY rack, the dedicated power supply position, the 100-240 V AC input requirement, and the screw-terminal connections. Confirm that the rack backplane interface matches and that the combined system demand remains within the 26 W total useful secondary power capacity.
The TSXPSY2600 is discontinued and is used primarily for service replacement and spare-part support in legacy Modicon Premium installations. TSXPSY2600M service replacement applications require system verification. Before returning the rack to operation, check the input supply, backplane seating, auxiliary 24 V wiring, and all three front-panel indicators.
Frequently Asked Questions
What is the Schneider Electric TSXPSY2600 used for?
The TSXPSY2600 supplies 5 V DC logic power to the Modicon Premium TSX RKY rack backplane and provides a 24 V DC auxiliary supply for sensor or relay circuits.
What input voltage does the TSXPSY2600 accept?
The nominal primary input is 100-240 V AC, with operating limits of 85-264 V AC and an operating frequency of 47-63 Hz.
How much output power does the TSXPSY2600 provide?
The module provides 26 W of total useful secondary output power. The individual output ratings are 25 W for the 5 V DC rail and 15 W for the 24 V DC rail.
How can a TSXPSY2600 replacement be checked after installation?
Check the OK/100-240V, 5V, and 24V front-panel indicators, verify the AC input and rack backplane connection, and confirm the auxiliary 24 V wiring. PL7 Pro, Unity Pro, or EcoStruxure Control Expert can be used for rack configuration and power supply diagnostics.
Which rack is compatible with the TSXPSY2600?
The TSXPSY2600 is installed in the dedicated power supply position of a Modicon Premium TSX RKY rack and connects through the Modicon Premium backplane connector.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Schneider Electric.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



