Siemens 6ES7135-4FB00-0AB0 SIMATIC ET 200S Analog Voltage Output Module

New 
On request
Refurbished   
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC ET 200S

The Siemens 6ES7135-4FB00-0AB0 is a SIMATIC DP electronic module for the SIMATIC ET 200S distributed I/O platform. This 2AO U analog voltage output module provides two configurable voltage channels for sending PLC-controlled setpoint signals to voltage-commanded drives, actuators, control valves and process equipment. It supports ±10 V and 1 to 5 V output ranges, with 13 bits plus sign resolution for the ±10 V range and 12-bit resolution for the 1 to 5 V range.

The module connects to the ET 200S backplane bus through a compatible 15 mm ET 200S terminal module. It does not provide a standalone PROFIBUS DP or PROFINET interface; network communication is handled by the ET 200S station through a compatible IM 151-1 PROFIBUS DP or IM 151-3 PROFINET interface module. Configuration, parameter assignment and diagnostics are performed in STEP 7 or TIA Portal. During startup, parameters are transferred automatically from the PLC or interface module, but replacement commissioning still requires the terminal module, signal range, wiring and controller configuration to match.

For troubleshooting, the SF group fault LED indicates an internal module error, parameterization error, short circuit on an output or missing supply voltage. Check the module supply, terminal-module seating, output wiring, selected signal range and connected load when an SF fault occurs. STEP 7 or TIA Portal online diagnostics, the ET 200S interface-module status summary, the PLC CPU hardware diagnostic buffer and PROFIBUS DP or PROFINET status registers can be used to identify module- or channel-related errors. With a cycle time below 1 ms and integrated short-circuit protection, this module is intended for responsive output control in existing ET 200S installations and for repair or replacement of failed modules.

Technical Specifications

ManufacturerSiemens
Part number6ES7135-4FB00-0AB0
Model/typeSIMATIC DP Electronic Module for ET 200S, 2AO U
Component typeAnalog voltage output module
Product familySIMATIC ET 200S
Number of analog outputs2 channels
Output voltage range±10 V
Output voltage range1 to 5 V
Resolution for ±10 V range13 bits plus sign
Resolution for 1 to 5 V range12 bits
Cycle time<1 ms
Output impedance10 kΩ
Output protectionShort-circuit protection
Internal interfaceET 200S backplane bus via terminal module
Supported system bus protocolsPROFIBUS DP or PROFINET via compatible ET 200S interface module
Mounting requirementCompatible 15 mm ET 200S terminal module
Product lifecycle statusDiscontinued
Discontinuation date2011-10-01

Programming and Configuration

Configuration, parameter assignment and online diagnostics for the 6ES7135-4FB00-0AB0 are handled through Siemens STEP 7 or TIA Portal engineering environments. The module parameters are transferred automatically from the PLC or ET 200S interface module during startup.

For a replacement, restore or transfer the controller and ET 200S station configuration, then confirm that the configured output signal range corresponds with the connected device. Commissioning also requires the compatible 15 mm terminal module, correct output wiring and a matching controller configuration.

Communication and System Integration

The module uses the ET 200S backplane bus through its terminal module and does not include a separate PROFIBUS DP or PROFINET interface. The two analog output channels are integrated into the distributed ET 200S station.

PROFIBUS DP communication is provided through a compatible ET 200S IM 151-1 interface module, while PROFINET communication is provided through an ET 200S IM 151-3 interface module. System status and module or channel errors can be reported through PROFIBUS DP or PROFINET status registers.

Diagnostics and Status Indication

The SF group fault LED provides local indication of an internal module error, parameterization error, short circuit on an output or missing supply voltage. Further diagnostics are available through STEP 7 or TIA Portal online diagnostics, the ET 200S interface-module status summary and the hardware diagnostic buffer read through the PLC CPU.

When an SF fault is present, check the module supply, terminal-module connection, output wiring, signal-range parameter and connected load. PROFIBUS DP or PROFINET status registers can provide channel-specific or module-level error reporting.

Status LED Indicators

LEDColor/StatusMeaning
SFGroup fault or system fault indication. Indicates an internal module error, parameterization error, short circuit on an output, or absence of supply voltage.

Replacement and Spare Part Considerations

The Siemens 6ES7135-4FB00-0AB0 is a discontinued ET 200S analog output module intended for servicing existing installations. Before ordering a spare, match the exact part number and confirm the compatible 15 mm ET 200S terminal module, the required ±10 V or 1 to 5 V signal range, output wiring and the installed ET 200S interface station.

Replacement commissioning requires the controller and station configuration to match the installed module. Parameters are transferred automatically from the PLC or interface module during startup, but the output range and connected circuit must still be checked before returning the machine to operation. Confirm whether the station uses an IM 151-1 PROFIBUS DP or IM 151-3 PROFINET interface module and whether the replacement is being fitted into the same ET 200S configuration.

Frequently Asked Questions

What is the Siemens 6ES7135-4FB00-0AB0?

It is a SIMATIC DP electronic module for the SIMATIC ET 200S distributed I/O platform, providing two configurable analog voltage output channels.

Which output ranges does the 6ES7135-4FB00-0AB0 support?

The module supports ±10 V and 1 to 5 V output ranges. Resolution is 13 bits plus sign for ±10 V and 12 bits for 1 to 5 V.

Does this module have a built-in PROFIBUS DP or PROFINET interface?

No. It connects to the ET 200S backplane bus through a terminal module. PROFIBUS DP or PROFINET communication is provided by the compatible ET 200S interface module in the station.

Which software is used to configure and diagnose this module?

Configuration, parameter assignment and diagnostics are performed through STEP 7 or TIA Portal. Additional status information is available through the ET 200S interface module and PLC CPU diagnostic functions.

What should be checked when the SF LED indicates a fault?

Check the module supply, terminal-module connection, output wiring, configured signal range and connected load. The SF indication can relate to an internal module error, parameterization error, output short circuit or missing supply voltage.

Does a replacement module require manual parameter entry?

Parameters are transferred automatically from the PLC or interface module during startup. The terminal module, signal range, wiring and controller configuration must still match the replacement installation.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.