Siemens 6ES7954-8LC03-0AA0 SIMATIC S7 4 MB Micro Memory Card

New 
4 available within 2 - 3 business days
Refurbished   
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC S7

The Siemens 6ES7954-8LC03-0AA0 is a SIMATIC S7 Micro Memory Card with 4 MB of non-volatile Flash-EPROM storage. This industrial memory card is used with compatible SIMATIC S7-1200 and S7-1500 CPUs, as well as SINAMICS drive control units that support the SIMATIC S7 memory card format. It stores user programs, parameters, data logs, project files and firmware update files for controller maintenance and machine commissioning.

A spare card can be prepared with TIA Portal or STEP 7 for PLC program transfer, project backup and restore, data logging or firmware update card creation. In a replacement situation, the card can be transferred to a compatible replacement controller when the target CPU supports the card format and its firmware is compatible with the stored project. The card may therefore carry the configuration required for a controller replacement, but the target CPU and stored project still need to be checked before commissioning.

The 4 MB card uses non-volatile storage, so controller data is retained without continuous power. It supports a minimum of 500000 write/delete cycles under the specified operating conditions, with data retention of 10 years when write/delete activity remains below 50000 cycles and 1 year when activity exceeds 450000 cycles. Do not format the card with standard Windows FAT or FAT32 tools, as Siemens system files can be removed and the card can become unusable in S7 CPUs. Siemens identifies this part as discontinued for spare-part use; the successor is 6ES7954-8LC04-0AA0.

Technical Specifications

ManufacturerSiemens
Part number6ES7954-8LC03-0AA0
Model/typeSIMATIC S7 Micro Memory Card, 4 MB
Component typeIndustrial memory card
Product familySIMATIC S7
Storage capacity4 MB
Memory technologyFlash-EPROM
Storage typeNon-volatile
Flash operating voltage3.3 V
Minimum write/delete cycles500000 cycles
Minimum data retention10 years
Data retention condition10 years when write/delete cycles remain below 50000; 1 year when cycles exceed 450000
Supported stored dataUser programs, parameters, data logs, project files and firmware update files
Compatible systemsSIMATIC S7-1200 CPUs, SIMATIC S7-1500 CPUs and SINAMICS drive control units supporting the SIMATIC S7 memory card format
Engineering softwareTIA Portal and STEP 7
Backup and restoreSupported

Programming and Configuration

TIA Portal and STEP 7 can be used with the Siemens 6ES7954-8LC03-0AA0 for PLC program transfer, project backup and restore, parameter storage, data logging and creation of firmware update cards. The card stores user programs, parameters, data logs, project files and firmware update files in non-volatile Flash-EPROM memory.

For replacement-controller commissioning, transfer the card to a compatible SIMATIC S7-1200 or S7-1500 CPU, or to a SINAMICS drive control unit that supports the SIMATIC S7 memory card format. Confirm that the target CPU supports the card format and that its firmware is compatible with the stored project before starting the machine.

Replacement and Spare Part Considerations

The exact replacement reference is Siemens 6ES7954-8LC03-0AA0, a 4 MB SIMATIC S7 Micro Memory Card. Check the installed controller family and confirm that the replacement CPU or SINAMICS drive control unit supports the SIMATIC S7 memory card format. The stored project and target firmware must also be compatible before the spare is commissioned.

This part is discontinued and designated for spare-part use. Siemens identifies 6ES7954-8LC04-0AA0 as the successor. Do not use standard Windows FAT or FAT32 formatting tools, because Siemens system files can be removed and the card can become unusable in S7 CPUs. Use TIA Portal or STEP 7 for the required memory-card preparation, transfer and backup or restore workflow.

Frequently Asked Questions

What is the Siemens 6ES7954-8LC03-0AA0 used for?

It is a 4 MB SIMATIC S7 Micro Memory Card for storing and transferring user programs, parameters, data logs, project files and firmware update files in compatible Siemens automation systems.

Which Siemens systems support this 4 MB memory card?

The card is intended for compatible SIMATIC S7-1200 and S7-1500 CPUs and SINAMICS drive control units that support the SIMATIC S7 memory card format.

Which software is used to prepare the card?

TIA Portal and STEP 7 can be used for PLC program transfer, project backup and restore, data logging and firmware update card creation.

Can the card be transferred to a replacement controller?

Yes, the card can be transferred between compatible controllers when the target CPU supports the card format and its firmware is compatible with the stored project. These conditions must be checked before commissioning.

Can this Siemens memory card be formatted with Windows?

No. Standard Windows FAT or FAT32 formatting can remove Siemens system files and make the card unusable in S7 CPUs. Use the appropriate Siemens engineering software and procedure instead.

How long does the stored data remain available?

The card provides a minimum of 10 years of data retention when write/delete activity remains below 50000 cycles. Retention is 1 year when write/delete activity exceeds 450000 cycles.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.