Siemens 6ES7138-4DA01-0AB0 SIMATIC DP ET 200S Counter Module

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7138-4DA01-0AB0 is a SIMATIC DP 1-channel high-speed counter electronic module for ET 200S distributed I/O systems. It accepts signals from 24 V incremental encoders and pulse generators, with counting frequencies up to 100 kHz. The module provides speed, frequency, and period measurement for encoder feedback, pulse monitoring, and motion-related measurement in existing automation installations. Its compact 15 mm width suits space-constrained ET 200S control panels and distributed I/O stations.
The module connects to a compatible ET 200S terminal module through the ET 200S terminal module bus and integrates with the ET 200S head station and PLC master. Configuration and parameter assignment are performed with Siemens SIMATIC STEP 7 or TIA Portal. During replacement, operating parameters can be transferred automatically from the PLC or ET 200S head module when the module is installed on a compatible terminal module and the head-station configuration matches. The connected encoder or pulse generator, 24 V signal level, terminal module, and ET 200S system configuration should therefore be checked before commissioning a spare.
For troubleshooting, the red SF LED indicates a group or system fault and may point to a hardware failure, parameterization error, or encoder signal failure. Diagnostic information can be assessed through the STEP 7 Diagnostic Buffer, TIA Portal System Diagnostics, or a diagnostic telegram transmitted to the ET 200S head station or PLC. Check the encoder or pulse-generator signal and the module parameterization in the engineering environment when the counter does not operate as expected. The discontinued ET 200S family makes this module relevant as a spare or replacement component for maintaining existing Siemens installations.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7138-4DA01-0AB0 |
| Model/type | SIMATIC DP 1-channel high-speed counter module |
| Component type | High-speed counter electronic module |
| Product family | ET 200S |
| Supply voltage | 24 V DC |
| Counter channels | 1 |
| Maximum counting frequency | 100 kHz |
| Encoder input | 24 V incremental encoder or pulse generator input |
| Measurement functions | Speed, frequency, and period measurement |
| Backplane interface | ET 200S terminal module bus |
| Module width | 15 mm |
| Lifecycle status | Discontinued; typically used as a spare or replacement module |
Programming and Configuration
Engineering and parameter assignment are performed with Siemens SIMATIC STEP 7 or TIA Portal through the ET 200S head station and PLC master. The module is configured for high-speed counting and for speed, frequency, or period measurement according to the installed machine configuration.
When an identical replacement is installed on a compatible ET 200S terminal module, operating parameters can be transferred automatically from the PLC or ET 200S head module during startup. Before commissioning, confirm the 24 V encoder or pulse-generator connection, the terminal module, and the head-station configuration.
Communication and System Integration
The 6ES7138-4DA01-0AB0 receives counting signals through its 24 V incremental encoder or pulse generator input. It supports a single counting channel with a maximum counting frequency of 100 kHz and provides speed, frequency, and period measurement functions.
System communication takes place through the ET 200S terminal module bus to the compatible ET 200S head station and PLC master. The module is intended for Siemens SIMATIC ET 200S distributed I/O systems and must be matched with the installed terminal module and head-station configuration.
Diagnostics and Status Indication
The red SF LED provides group or system fault indication. It may indicate a hardware failure, parameterization error, or encoder signal failure.
Further diagnostic methods include the STEP 7 Diagnostic Buffer, TIA Portal System Diagnostics, and diagnostic telegram transmission to the ET 200S head station or PLC. These methods support checks of the module state, parameterization, and encoder signal path.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| SF | Red | Group or system fault indicator; may indicate hardware failure, parameterization error, or encoder signal failure |
Replacement and Spare Part Considerations
Replacement verification should start with the exact Siemens part number 6ES7138-4DA01-0AB0, the ET 200S product family, the 15 mm module width, and the single-channel 24 V high-speed counter function. Confirm that the replacement is being installed with a compatible ET 200S terminal module and head station.
The encoder or pulse generator must match the 24 V input arrangement, and the application must remain within the 100 kHz maximum counting frequency. STEP 7 or TIA Portal is used for configuration, while automatic parameter transfer from the PLC or ET 200S head module can reduce manual setup during replacement. The discontinued status of the ET 200S family makes accurate part-number and system-configuration matching important when sourcing a spare.
Frequently Asked Questions
What is the Siemens 6ES7138-4DA01-0AB0?
It is a SIMATIC DP 1-channel high-speed counter electronic module for Siemens ET 200S distributed I/O systems. It accepts 24 V incremental encoder and pulse-generator signals.
What counting frequency does the 6ES7138-4DA01-0AB0 support?
The module supports counting frequencies up to 100 kHz.
Which engineering software is used with this ET 200S counter module?
Configuration and parameter assignment are performed with Siemens SIMATIC STEP 7 or TIA Portal through the ET 200S head station and PLC master.
Can parameters transfer automatically to a replacement module?
Yes. When an identical module is installed on a compatible ET 200S terminal module, operating parameters can be transferred automatically from the PLC or ET 200S head module during startup.
What does the red SF LED indicate?
The red SF LED indicates a group or system fault and may point to a hardware failure, parameterization error, or encoder signal failure. Additional checks can be made through the STEP 7 Diagnostic Buffer or TIA Portal System Diagnostics.
Which interfaces must be checked before replacing this counter module?
Check the 24 V incremental encoder or pulse-generator input, the ET 200S terminal module bus, the compatible terminal module, and the ET 200S head-station configuration.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



