Siemens 6ES7321-1BH02-0AA0 SIMATIC S7-300 SM 321 Digital Input Module

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7321-1BH02-0AA0 is a SIMATIC S7-300 SM 321 digital input module for acquiring binary field signals in an S7-300 PLC rack. It provides 16 opto-isolated 24 V DC digital input channels with group-wise isolation across all 16 channels. The module accepts a permissible supply voltage range of 20.4–28.8 V DC and connects to the S7-300 system through the backplane bus.
Field wiring is connected through a removable 20-pole front connector available in screw-type or spring-loaded versions. Before commissioning a replacement, verify the S7-300 rack and backplane-bus configuration, the connector version and the field wiring. Hardware configuration and PLC programming can be handled with STEP 7 or STEP 7 in TIA Portal for compatible S7-300 projects. The module is the successor to Siemens 6ES7321-1BH01-0AA0 and is identified as a phase-out Siemens spare part.
Individual green channel LEDs labelled Channel LEDs 1–16 illuminate when the corresponding input carries an active high signal, or logic 1. During troubleshooting, compare the channel indication with the connected sensor, switch or limit device, check the 24 V DC supply within the permissible range, inspect the field wiring and confirm that the module is correctly connected to the S7-300 rack and backplane bus. Input delay is specified at 1.2–4.8 ms, and shielded cable runs can extend up to 1000 m.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7321-1BH02-0AA0 |
| Model/type | SIMATIC S7-300 SM 321 Digital Input Module |
| Product family | SIMATIC S7-300 |
| Component type | Digital input module |
| Digital inputs | 16 channels |
| Input type | 24 V DC opto-isolated digital inputs |
| Rated load voltage | 24 V DC |
| Permissible supply voltage range | 20.4–28.8 V DC |
| Input current at signal 1 | 7 mA typical |
| Input delay | 1.2–4.8 ms |
| Channel isolation | Group-wise isolation, 16 channels per group |
| Isolation test voltage | 500 V DC |
| Backplane bus current consumption | 10 mA maximum |
| Power loss | 3.5 W typical |
| Front connector | 20-pole front connector |
| Front connector options | Screw-type or spring-loaded |
| Internal interface | S7-300 backplane bus |
| Maximum shielded cable length | 1000 m |
| Maximum unshielded cable length | 600 m |
| Lifecycle status | Phase-out; identified as a Siemens spare part |
Programming and Configuration
The 6ES7321-1BH02-0AA0 is configured as part of a compatible SIMATIC S7-300 project. STEP 7 can be used for hardware configuration and PLC programming, while STEP 7 in TIA Portal is supported for compatible S7-300 projects.
For a replacement installation, match the module position and input-channel assignment in the project with the installed S7-300 rack. Confirm the 16-channel configuration, reconnect the correct field wiring through the removable 20-pole front connector and check the channel LEDs during commissioning.
Communication and System Integration
The module integrates with compatible SIMATIC S7-300 racks through the S7-300 backplane bus. This internal interface connects the digital input module to the PLC system for acquisition of binary field signals.
Field devices connect through the removable 20-pole front connector, available in screw-type or spring-loaded versions. The module supports shielded cable runs up to 1000 m and unshielded cable runs up to 600 m.
Diagnostics and Status Indication
Channel LEDs 1–16 provide individual visual status indication. Each green LED illuminates when its corresponding digital input detects an active high signal, or logic 1.
For first-line checks, compare the relevant LED with the state of the connected sensor, switch or limit device. Also check the 24 V DC supply, field wiring, front-connector seating and the module connection to the S7-300 rack and backplane bus.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| Channel LEDs 1–16 | Green - Illuminated when active | Indicates an active high signal, or logic 1, on the corresponding digital input channel |
Replacement and Spare Part Considerations
For a compatible replacement, match the exact Siemens part number 6ES7321-1BH02-0AA0, the SIMATIC S7-300 rack and backplane-bus arrangement, the 16-channel 24 V DC input function and the installed 20-pole front-connector version. The module is the successor to Siemens 6ES7321-1BH01-0AA0.
Before returning the machine to service, verify the module position, project configuration, field-channel assignments, supply voltage and connector wiring. The 6ES7321-1BH02-0AA0 is identified as a phase-out Siemens spare part and is relevant for S7-300 maintenance stock and replacement installations.
Frequently Asked Questions
What is the Siemens 6ES7321-1BH02-0AA0?
It is a SIMATIC S7-300 SM 321 digital input module with 16 opto-isolated 24 V DC input channels.
Which connector does the 6ES7321-1BH02-0AA0 use?
The module uses a removable 20-pole front connector available in screw-type or spring-loaded versions.
Which software is used to configure this S7-300 input module?
Hardware configuration and PLC programming can be handled with STEP 7 or STEP 7 in TIA Portal for compatible S7-300 projects.
How can the input channels be checked during troubleshooting?
Green Channel LEDs 1–16 illuminate when the corresponding input detects an active high signal, or logic 1. The relevant supply, field wiring, connector and rack connection should also be checked.
What should match when replacing a Siemens SM 321 module?
Verify the exact part number, SIMATIC S7-300 rack and backplane-bus configuration, 16-channel 24 V DC input function, project configuration, channel assignments and 20-pole connector version.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



