Siemens 6ES7414-2XG04-0AB0 S7-400 CPU 414-2 PLC

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6ES7414-2XG04-0AB0 is a SIMATIC S7-400 CPU 414-2 central processing unit for established industrial automation systems. This PLC CPU provides 512 KB of total work memory, divided into 256 KB of program memory and 256 KB of data memory. It operates from a 24 V DC supply and is used in existing Siemens S7-400 control architectures, including manufacturing, process control and distributed I/O systems.
The CPU has an integrated MPI/PROFIBUS DP interface with master or slave operation and communication speeds up to 12 Mbit/s, plus a second integrated PROFIBUS DP interface supporting master or slave operation. Programming and hardware configuration require Siemens STEP 7 V5.2 SP1 HF3 or higher with the required hardware update. A replacement CPU must be matched to the installed S7-400 rack, firmware version V4.0, memory-card arrangement and project configuration before commissioning.
This discontinued Siemens CPU supports configuration in RUN, with CiR synchronization performance of 100 ms for the basic load and 80 µs per I/O byte. For a like-for-like replacement, confirm the exact part number and the existing MPI and PROFIBUS DP architecture before fitting a spare. The recommended successor is Siemens 6ES7414-2XK05-0AB0, but newer variants may have different memory capacity and system requirements.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6ES7414-2XG04-0AB0 |
| Model/type | CPU 414-2 |
| Component type | PLC central processing unit |
| Product family | SIMATIC S7-400 |
| Total work memory | 512 KB |
| Program memory | 256 KB |
| Data memory | 256 KB |
| Supply voltage | 24 V DC |
| Firmware version | V4.0 |
| Integrated interface 1 | MPI/PROFIBUS DP, master/slave |
| Integrated interface 1 speed | 12 Mbit/s |
| Integrated interface 2 | PROFIBUS DP, master/slave |
| Configuration in RUN | Supported |
| CiR synchronization basic load | 100 ms |
| CiR synchronization time per I/O byte | 80 µs |
| Lifecycle status | Discontinued |
Programming and Configuration
Programming and hardware configuration for the 6ES7414-2XG04-0AB0 use Siemens STEP 7 V5.2 SP1 HF3 or higher with the required hardware update. The installed S7-400 project must be aligned with the CPU and its hardware configuration before the replacement is commissioned.
The CPU uses firmware version V4.0 and provides 256 KB of program memory together with 256 KB of data memory. When preparing a spare, match the firmware, memory-card arrangement and project configuration to the failed unit and installed system.
Configuration in RUN is supported. CiR synchronization performance is 100 ms for the basic load and 80 µs per I/O byte, subject to the supported system configuration.
Communication and System Integration
The CPU integrates an MPI/PROFIBUS DP interface with master or slave operation and communication speeds up to 12 Mbit/s. This interface supports programming, controller communication and PROFIBUS DP network integration in existing SIMATIC S7-400 systems.
A second integrated PROFIBUS DP interface also supports master or slave operation. Check the installed network architecture, interface assignments and connected distributed I/O before commissioning a replacement CPU.
Replacement and Spare Part Considerations
The Siemens 6ES7414-2XG04-0AB0 is a discontinued CPU intended primarily for like-for-like replacement in existing SIMATIC S7-400 installations. Confirm the exact part number, CPU type, firmware version V4.0, memory-card arrangement, rack configuration and installed STEP 7 environment before ordering a spare.
The MPI and dual PROFIBUS DP interfaces must match the communication layout of the machine. A replacement may require transfer of the S7-400 project and alignment of the hardware configuration before it can return to service. Siemens identifies 6ES7414-2XK05-0AB0 as a recommended successor, but its memory capacity and system requirements may differ from this CPU 414-2.
Frequently Asked Questions
What is the Siemens 6ES7414-2XG04-0AB0?
It is a Siemens SIMATIC S7-400 CPU 414-2 PLC central processing unit with 512 KB of total work memory for established industrial automation systems.
Which software is required to configure this S7-400 CPU?
Programming and hardware configuration require Siemens STEP 7 V5.2 SP1 HF3 or higher with the required hardware update.
What communication interfaces does the CPU provide?
The CPU provides an integrated MPI/PROFIBUS DP interface and a second PROFIBUS DP interface. Both support master or slave operation, and the first interface operates at up to 12 Mbit/s.
What should be checked before replacing this CPU?
Check the exact part number, CPU type, firmware version V4.0, memory-card arrangement, S7-400 rack, STEP 7 environment, project configuration and MPI/PROFIBUS DP network architecture.
Is 6ES7414-2XK05-0AB0 a replacement for this CPU?
Siemens identifies 6ES7414-2XK05-0AB0 as a recommended successor. Its memory capacity and system requirements may differ, so compatibility with the installed S7-400 system must be confirmed.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



