Siemens 6ES5928-3UA12 CPU 928A – SIMATIC S5 PLC CPU Module

New 
1 available for direct collection
Refurbished   
3 available for direct collection
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC S5

The Siemens 6ES5928-3UA12 is a CPU 928A central processor module for SIMATIC S5-135U and S5-155U PLC racks. It executes S5 control programs, manages data blocks and coordinates distributed I/O in established machine and process control systems. The module provides 192 KB of user memory, supports up to 256 timers, 256 counters, 2048 digital I/O points and 256 analog channels. Its processing architecture combines S-type fast bit logic with R-type fast byte processing, and the CPU occupies two adjacent rack slots.

Replacement commissioning uses Siemens STEP 5 for programming, configuration and diagnostics. The user program and configuration can be transferred through a STEP 5 project download or an S5 memory module, with program storage supported through RAM, EPROM, EEPROM or an S5 memory module. The integrated 20 mA TTY serial interface is used for programming and communication with a programming device. Before installing a spare, compare the rack type, two-slot clearance, firmware and hardware revision, installed I/O configuration and the available program backup.

The 6ES5928-3UA12 is intended for maintaining existing S5-135U and S5-155U control systems in legacy automation equipment. Troubleshooting can be performed with STEP 5 online ISTACK and BSTACK block stack inspection, together with diagnostic information in system data blocks. PROFIBUS communication requires an optional CP communication processor rather than a built-in PROFIBUS interface. Siemens identifies 6ES5928-3UA21 as the successor, so compatibility with the rack, firmware, hardware revision and I/O configuration must be checked before a replacement or migration.

Technical Specifications

ManufacturerSiemens
Part number6ES5928-3UA12
Model/typeCPU 928A
Component typePLC CPU module
Product familySIMATIC S5
User memory192 KB
Timers256
Counters256
Digital I/O capacity2048 points
Analog I/O capacity256 channels
Processing architectureS-type fast bit logic and R-type fast byte processing
Rack occupancy2 slots
Built-in programming interfaceTTY, 20 mA serial interface
PROFIBUS supportAvailable through an optional CP communication processor
Programming softwareSTEP 5
Program storageRAM, EPROM, EEPROM, or S5 memory module
Lifecycle statusObsolete

Programming and Configuration

Siemens STEP 5 is used for programming, configuration and diagnostics of the CPU 928A. A replacement CPU can receive the validated user program and configuration through a STEP 5 project download or an S5 memory module.

Program storage can use RAM, EPROM, EEPROM or an S5 memory module. During commissioning, confirm that the available program backup matches the installed S5-135U or S5-155U system and that the replacement CPU, firmware and hardware revision are compatible with the existing configuration.

Communication and System Integration

The CPU includes a built-in 20 mA TTY serial interface for programming and communication with a programming device. This interface is the main connection point for STEP 5 programming and diagnostic work on the CPU.

PROFIBUS communication is available through an optional CP communication processor. It is not provided as a built-in interface on the CPU, so the installed communication hardware must be checked when matching a replacement to an existing S5 system.

Diagnostics and Status Indication

STEP 5 provides diagnostic functions for the CPU 928A, including online ISTACK and BSTACK block stack inspection. Diagnostic information stored in system data blocks can also be reviewed during troubleshooting.

For a failed or replacement CPU, use the STEP 5 diagnostic workflow to inspect the block stacks and system data, then compare the rack, I/O configuration, program transfer method and communication hardware with the established installation.

Replacement and Spare Part Considerations

The Siemens 6ES5928-3UA12 is an obsolete CPU module for existing SIMATIC S5-135U and S5-155U PLC systems. A replacement must match the part number or approved migration path and must fit the two-slot rack requirement. Check the installed I/O configuration, firmware, hardware revision, program backup and communication setup before commissioning.

Siemens identifies 6ES5928-3UA21 as the successor. Compatibility with the successor or another spare depends on the rack, firmware and hardware revision, I/O configuration and program-transfer method. STEP 5 or a compatible S5 memory module can be used to restore the validated user program and configuration.

Frequently Asked Questions

What is the Siemens 6ES5928-3UA12?

It is a CPU 928A PLC CPU module for SIMATIC S5-135U and S5-155U PLC racks, with 192 KB of user memory and support for STEP 5 programming, configuration and diagnostics.

Which software is used to program the CPU 928A?

Siemens STEP 5 is used for programming, configuration and diagnostic work on the 6ES5928-3UA12.

How can the program be transferred to a replacement CPU?

The validated user program and configuration can be transferred through a STEP 5 project download or an S5 memory module. Storage options include RAM, EPROM, EEPROM or an S5 memory module.

Does the 6ES5928-3UA12 have a PROFIBUS interface?

PROFIBUS communication is available through an optional CP communication processor. The CPU itself has a built-in 20 mA TTY serial interface for programming and communication with a programming device.

What should be checked before replacing this CPU?

Check the S5-135U or S5-155U rack, two-slot clearance, firmware and hardware revision, installed I/O configuration, program backup and communication hardware. Siemens identifies 6ES5928-3UA21 as the successor.

How can the CPU 928A be diagnosed?

STEP 5 supports online ISTACK and BSTACK block stack inspection and review of diagnostic information stored in system data blocks.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.