R. STAHL 9186/12-11-11 Fibre Optic Isolating Repeater

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The R. STAHL 9186/12-11-11 Fibre Optic Isolating Repeater is an ISPAC Series 9186 communication module for extending fieldbus communication between safe and hazardous areas. It converts an RS485-IS fieldbus connection to an inherently safe Ex op is fibre optic link, providing optical isolation for industrial automation installations. The module operates from a 24 V DC supply, uses a 9-pin Sub-D connector for the fieldbus interface and supports optical line and ring topologies.
When replacing this repeater, match the 9186/12-11-11 part number, the RS485-IS connection and the required hazardous-area application. Series-level communication support includes PROFIBUS DP and Modbus RTU, with transmission rates from 1.2 kbps to 1.5 Mbps and optical transmission distances up to 2 km. Commissioning also requires the optical link, fieldbus wiring and network topology to correspond with the installed system and the selected hazardous-area variant and approvals.
The integrated optical fibre diagnostics monitor optical link status and signal degradation, helping maintenance teams identify problems in the optical communication path. For troubleshooting, check the RS485-IS fieldbus connection, the optical link and the selected network topology before returning the repeater to service. The 9186/12-11-11 is relevant as a replacement or spare where communication must be maintained across safe and hazardous areas.
Technical Specifications
| Manufacturer | R. STAHL |
| Part number | 9186/12-11-11 |
| Model/type | Fibre Optic Isolating Repeater |
| Component type | Communication module |
| Product family | ISPAC |
| Series | 9186 |
| Supply voltage | 24 V DC |
| Rated current | 130 mA |
| Fieldbus interface | RS485-IS via 9-pin Sub-D connector |
| Communication protocols | PROFIBUS DP and Modbus RTU |
| Optical interface | Fibre optic link with inherently safe Ex op is protection |
| Transmission rate | 1.2 to 1.5 kbps to Mbps |
| Maximum transmission distance | 2 km |
| Optical network topology | Line and ring |
| Hazardous-area application | Suitable for fieldbus communication across safe and hazardous areas, subject to correct variant and approval selection |
Communication and System Integration
The 9186/12-11-11 connects to an RS485-IS fieldbus through a 9-pin Sub-D connector and provides an inherently safe Ex op is fibre optic interface. ISPAC Series 9186 communication support includes PROFIBUS DP and Modbus RTU networks.
Transmission rates range from 1.2 kbps to 1.5 Mbps. The optical link can extend communication distances up to 2 km, depending on the complete system design and installation conditions. Line and ring optical topologies are supported for network layouts in process automation and hazardous-area installations.
Diagnostics and Status Indication
Integrated optical fibre diagnostics monitor the condition of the optical communication path. Optical link-state monitoring and signal-degradation monitoring support troubleshooting of communication problems between safe and hazardous areas.
During fault finding, inspect the RS485-IS fieldbus connection, the optical link and the configured line or ring topology. The diagnostic function helps maintenance teams distinguish optical communication problems from issues elsewhere in the fieldbus installation.
Replacement and Spare Part Considerations
For a replacement, verify the exact 9186/12-11-11 part number, the ISPAC Series 9186 system, the RS485-IS fieldbus interface and the required PROFIBUS DP or Modbus RTU network function. The optical link must also match the installed line or ring topology and the required transmission distance.
Hazardous-area use depends on the correct variant and approval selection for the installation. Before commissioning a spare, check the fieldbus wiring, 9-pin Sub-D connection, 24 V DC supply, optical link and network arrangement. These checks help ensure that the replacement is suitable for communication across the intended safe and hazardous areas.
Frequently Asked Questions
What is the R. STAHL 9186/12-11-11 used for?
It is a Fibre Optic Isolating Repeater and communication module for extending PROFIBUS DP and Modbus RTU fieldbus communication between safe and hazardous areas.
Which fieldbus connection does the 9186/12-11-11 use?
The fieldbus interface is RS485-IS via a 9-pin Sub-D connector.
Which communication protocols are supported?
ISPAC Series 9186 communication support includes PROFIBUS DP and Modbus RTU.
What transmission speed and distance does the repeater support?
The series supports transmission rates from 1.2 kbps to 1.5 Mbps and optical transmission distances up to 2 km.
How can the optical communication link be checked?
Integrated optical fibre diagnostics provide optical link-state monitoring and help identify optical signal degradation.
What should be checked before commissioning a replacement?
Verify the 9186/12-11-11 part number, ISPAC Series 9186 system, RS485-IS fieldbus connection, 24 V DC supply, optical link, network topology and the required hazardous-area variant and approvals.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Stahl.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



