Siemens 6GK7443-1EX30-0XE0 SIMATIC NET CP 443-1 Industrial Ethernet Communication Processor

New 
1 available within 2 - 3 business days
Refurbished   
10 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC NET

The Siemens 6GK7443-1EX30-0XE0 SIMATIC NET CP 443-1 is an Industrial Ethernet communication processor for SIMATIC S7-400 control systems. Mounted in a single-width S7-400 subrack slot, it connects the PLC to Industrial Ethernet and PROFINET networks. Two 10/100 Mbit/s RJ45 ports with an integrated two-port Industrial Ethernet switch support controller, device and open data communication. As a PROFINET IO controller, the CP 443-1 supports RT and IRT communication.

A replacement CP 443-1 can be configured and parameterized with STEP 7 V5.5 SP3 or later, or with STEP 7 Professional in TIA Portal V12 or later. Parameters are transferred through the S7-400 backplane and stored in non-volatile internal memory. Configuration can be loaded with STEP 7 or transferred from CPU memory during startup. This part number does not support a C-PLUG module, so the spare must be matched to the existing S7-400 rack, CPU, firmware and application configuration before commissioning.

For troubleshooting and servicing, the CP 443-1 provides STEP 7 Hardware Diagnostics, the STEP 7 diagnostic buffer and module information status, integrated HTTP web diagnostics, web-based diagnostics and SNMP v1 network monitoring. Check the S7-400 installation, the Ethernet connections, the configured communication parameters and the compatibility of the replacement with the CPU and application. Siemens lists 6GK7443-1EX31-0XE0 as the successor, while this 6GK7443-1EX30-0XE0 is discontinued and remains relevant for maintaining established S7-400 installations.

Technical Specifications

ManufacturerSiemens
Part number6GK7443-1EX30-0XE0
Model/typeSIMATIC NET CP 443-1
Product familySIMATIC NET
Component typeIndustrial Ethernet communication processor
Supply voltage5 V DC
Supply voltage tolerance±5%
Rated current consumption1.4 A
Power loss7.25 W
MountingSingle-width slot mounting in SIMATIC S7-400 subrack
Ethernet interfaces2-port integrated Industrial Ethernet switch
Ethernet connectorRJ45
Ethernet data rate10/100 Mbit/s
PROFINET IO controllerRT and IRT support
Supported communication protocolsS7 communication, ISO transport, TCP/IP, ISO-on-TCP, UDP, MRP, SNMP v1, DCP, LLDP and NTP
Maximum CP 443-1 modules per CPU14
Maximum PROFINET IO controllers per CPU4
Maximum PROFINET IO devices128
Maximum PROFINET IRT devices64
Maximum open communication connections64
Maximum S7 communication connections128
Maximum programming device connections2
Maximum active multiprotocol connections128
Maximum ISO/TCP user data8 KiB via SEND/RECEIVE
Maximum UDP user data2 KiB via SEND/RECEIVE
Lifecycle statusDiscontinued

Programming and Configuration

The Siemens CP 443-1 is configured, parameterized and diagnosed with STEP 7 V5.5 SP3 or later, or with STEP 7 Professional in TIA Portal V12 or later. The engineering environment is used to transfer the CP configuration and establish its S7-400 communication parameters.

Parameters are transferred through the S7-400 backplane and stored in non-volatile internal memory. A replacement can also receive its configuration from CPU memory during startup, allowing the spare to be prepared as part of the existing S7-400 system commissioning process.

The 6GK7443-1EX30-0XE0 does not support a C-PLUG module. Confirm the S7-400 rack, CPU, firmware and application configuration before loading the replacement configuration.

Communication and System Integration

The CP 443-1 provides two 10/100 Mbit/s RJ45 ports through an integrated two-port Industrial Ethernet switch. It supports PROFINET IO controller operation with RT and IRT communication, with up to 128 PROFINET IO devices including up to 64 IRT devices.

Supported communication services include S7 communication, S7 routing, ISO transport, TCP/IP, ISO-on-TCP according to RFC 1006 and UDP. The module supports up to 64 open communication connections and up to 128 S7 communication connections when used with multiple CPUs.

For network integration and availability, the module supports MRP ring redundancy, SNMP v1 monitoring, DCP device discovery, LLDP topology detection and NTP time synchronization. Its maximum capacity includes 14 CP 443-1 modules per CPU, 4 PROFINET IO controllers per CPU, 2 programming device connections and 128 active multiprotocol connections.

Diagnostics and Status Indication

Diagnostics are available through STEP 7 Hardware Diagnostics, the STEP 7 diagnostic buffer and module information status. These tools support service work on the CP 443-1 within the S7-400 project.

The integrated HTTP server provides extended web diagnostics and web-based diagnostics, while SNMP v1 supports network monitoring. During troubleshooting, check the S7-400 installation, Ethernet connections, configured communication parameters and system compatibility.

Replacement and Spare Part Considerations

For a replacement, match the exact Siemens part number 6GK7443-1EX30-0XE0 and confirm that the existing installation uses a compatible SIMATIC S7-400 subrack and CPU. The spare must also align with the installed STEP 7 or TIA Portal engineering environment, firmware and application configuration.

The replacement configuration can be loaded with STEP 7 or transferred from CPU memory during startup. Because the module uses parameters stored in non-volatile internal memory and does not support a C-PLUG module, configuration transfer and commissioning should be planned before returning the system to operation.

Siemens lists 6GK7443-1EX31-0XE0 as the successor. Application and firmware compatibility must be checked before selecting the successor for an existing installation. The 6GK7443-1EX30-0XE0 is discontinued and is primarily used to maintain established S7-400 systems.

Frequently Asked Questions

What is the Siemens 6GK7443-1EX30-0XE0?

It is a SIMATIC NET CP 443-1 Industrial Ethernet communication processor for SIMATIC S7-400 systems, with two 10/100 Mbit/s RJ45 ports and an integrated two-port Industrial Ethernet switch.

Which software is used to configure the CP 443-1?

The module can be configured, parameterized and diagnosed with STEP 7 V5.5 SP3 or later, or with STEP 7 Professional in TIA Portal V12 or later.

Does the CP 443-1 support PROFINET IO?

Yes. The CP 443-1 operates as a PROFINET IO controller and supports RT and IRT communication, with up to 128 PROFINET IO devices including up to 64 IRT devices.

How can configuration be transferred to a replacement CP 443-1?

Configuration can be loaded using STEP 7 or transferred from CPU memory during startup. Parameters are transferred through the S7-400 backplane and stored in non-volatile internal memory.

Which communication protocols does the 6GK7443-1EX30-0XE0 support?

Supported services include S7 communication, S7 routing, ISO transport, TCP/IP, ISO-on-TCP according to RFC 1006, UDP, MRP, SNMP v1, DCP, LLDP and NTP.

Is the Siemens 6GK7443-1EX30-0XE0 discontinued?

Yes. The 6GK7443-1EX30-0XE0 is discontinued. Siemens lists 6GK7443-1EX31-0XE0 as its successor, but application and firmware compatibility must be checked before replacement.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.