Siemens 6GK7343-1CX10-0XE0 CP 343-1 Lean Industrial Ethernet Communication Processor

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6GK7343-1CX10-0XE0 CP 343-1 is an Industrial Ethernet communication processor for SIMATIC S7-300 automation systems. Also identified as the CP 343-1 Lean, it connects an S7-300 PLC to Industrial Ethernet plant networks and provides two RJ45 ports with an integrated 2-port switch. The module supports transmission rates from 10 to 100 Mbit/s and is intended for communication with supervisory systems, distributed automation equipment and other Ethernet-enabled systems.
A replacement CP 343-1 Lean uses the S7-300 backplane connection and requires a separate 24 V DC external supply through its 2-pole pluggable terminal block, in addition to the 5 V DC backplane supply. Configuration, parameterization and commissioning are handled with Siemens STEP 7. Configuration data can be retained in non-volatile storage via the S7-300 CPU or backplane bus, allowing module exchange without a programming device when the replacement and rack configuration meet the required conditions.
For troubleshooting and maintenance, the CP 343-1 Lean can be checked through STEP 7 diagnostics, SNMP diagnostics and LAN initialization diagnostics. Verify the 24 V DC supply, the S7-300 rack and backplane connection, the RJ45 network connections and the configured communication parameters when restoring a failed installation. As a discontinued Siemens spare part, the 6GK7343-1CX10-0XE0 is suited to repair, replacement and lifecycle extension of existing S7-300 systems.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6GK7343-1CX10-0XE0 |
| Model/type | CP 343-1 |
| Component type | Industrial Ethernet communication processor |
| Product family | SIMATIC NET |
| Backplane supply voltage | 5 V DC |
| Backplane current consumption | 0.2 A |
| External supply voltage | 24 (+20% / -15%) V DC |
| External current consumption | 0.16 A |
| Industrial Ethernet ports | 2 RJ45 ports |
| Transmission rate | 10 to 100 Mbit/s |
| Integrated switch | 2-port Industrial Ethernet switch |
| Supported protocols | TCP/IP, UDP, PROFINET IO Device, S7 Communication Server, SNMP |
| TCP/IP functions | SEND/RECEIVE with and without RFC 1006, FETCH/WRITE |
| UDP functions | Multicast supported |
| External power connector | 2-pole pluggable terminal block |
| Configuration and diagnostics software | STEP 7 |
| Configuration storage | Non-volatile configuration via S7-300 CPU or backplane bus |
| Module replacement | Module exchange without programming device |
| Lifecycle status | Discontinued; designated as a spare part |
Programming and Configuration
The Siemens 6GK7343-1CX10-0XE0 is configured, parameterized and diagnosed with STEP 7. The communication processor is used with SIMATIC S7-300 systems and exchanges configuration data through the S7-300 CPU or backplane bus.
Non-volatile configuration storage supports module exchange without a programming device when the replacement module and rack configuration meet the required conditions. During commissioning, confirm the transferred configuration and the configured Industrial Ethernet communication parameters before returning the S7-300 system to service.
Communication and System Integration
The CP 343-1 Lean provides two RJ45 Industrial Ethernet ports and an integrated 2-port switch. The ports support transmission rates from 10 to 100 Mbit/s for connection to Industrial Ethernet plant networks and S7-300 system infrastructure.
Supported communication functions include TCP/IP, UDP with multicast, PROFINET IO Device, S7 Communication as a server and SNMP. TCP/IP functions include SEND/RECEIVE with and without RFC 1006, together with FETCH/WRITE services.
Diagnostics and Status Indication
Maintenance diagnostics for the CP 343-1 Lean are available through STEP 7, SNMP diagnostics and LAN initialization diagnostics. These functions support configuration checks and communication troubleshooting during commissioning or when restoring an existing S7-300 installation.
Replacement and Spare Part Considerations
For a compatible replacement, match the Siemens part number 6GK7343-1CX10-0XE0 and confirm that the module is intended for the existing SIMATIC S7-300 rack and backplane bus. Check the two RJ45 Industrial Ethernet connections, the separate 24 V DC supply and the 2-pole pluggable terminal block before installation.
The replacement may use configuration data retained through the S7-300 CPU or backplane bus, supporting module exchange without a programming device when the required system conditions are met. STEP 7 is used for configuration, parameterization and diagnostics, so the communication settings should be checked after the spare has been installed.
Frequently Asked Questions
What is the Siemens 6GK7343-1CX10-0XE0?
It is a CP 343-1 Industrial Ethernet communication processor, also identified as the CP 343-1 Lean, for SIMATIC S7-300 systems.
Which interfaces does the CP 343-1 Lean provide?
The module provides two RJ45 Industrial Ethernet ports with an integrated 2-port switch and supports transmission rates from 10 to 100 Mbit/s.
Which protocols are supported by this S7-300 communication processor?
Supported protocols and functions include TCP/IP, UDP with multicast, PROFINET IO Device, S7 Communication Server, SNMP, SEND/RECEIVE with and without RFC 1006, and FETCH/WRITE.
Which software is used to configure and diagnose the CP 343-1 Lean?
Siemens STEP 7 is used for configuration, parameterization and diagnostics. LAN initialization and SNMP diagnostics provide additional maintenance options.
What power supplies are required for the 6GK7343-1CX10-0XE0?
The module receives 5 V DC through the S7-300 backplane and requires a separate 24 (+20% / -15%) V DC external supply through a 2-pole pluggable terminal block.
Can the CP 343-1 Lean be exchanged without a programming device?
Module exchange without a programming device is supported when the replacement and rack configuration meet the required conditions and configuration data can be retained through the S7-300 CPU or backplane bus.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



