Phoenix Contact 2737203 ILC 350 ETH Inline Controller

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Phoenix Contact 2737203 ILC 350 ETH is an ILC 350 ETH Inline Controller and PLC CPU/controller for modular industrial automation and machine control. It integrates directly with Phoenix Contact Inline I/O modules and combines an integrated Ethernet interface with an Inline local bus. The controller operates from a nominal 24 V DC supply and supports IEC 61131-3 programming for coordinated control applications.
When replacing this Phoenix Contact Inline Controller, the spare must match the existing Inline I/O arrangement, communication requirements and control project. The ILC 350 ETH supports Ethernet and INTERBUS communication, up to 16 control tasks, and project and parameter backup for restoration during a controller replacement. Commissioning therefore includes transferring the compatible project and parameters and checking the software, firmware, IP configuration and Inline bus hardware layout.
For an existing installation, verify the 2737203 part number, 24 V DC supply range of 20.4 to 30 V DC, Ethernet connection, supported Inline or INTERBUS participants and local bus arrangement before commissioning a replacement. The Inline local bus supports up to 512 total participants, including up to 254 Inline/INTERBUS participants, while potential distribution supports up to 8 A for attached local bus devices. These checks help identify configuration or system-integration issues when restoring an Inline controller.
Technical Specifications
| Manufacturer | Phoenix Contact |
| Part number | 2737203 |
| Model/type | ILC 350 ETH |
| Component type | PLC CPU/controller |
| Product family | Inline Controller (ILC) |
| Rated supply voltage | 24 V DC |
| Supply voltage range | 20.4 to 30 V DC |
| Typical current consumption | 250 mA |
| Maximum potential distribution current | 8 A |
| Ethernet interface | Integrated; system communication and controller coupling |
| Inline local bus | Integrated; supports up to 512 total participants and up to 254 Inline/INTERBUS participants |
| Supported communication protocols | Ethernet and INTERBUS |
| Control tasks | 16 |
| Programming standard | IEC 61131-3 |
| Project backup and restore | Supported through controller project and parameter backup |
Programming and Configuration
The ILC 350 ETH is programmable according to IEC 61131-3 and supports up to 16 control tasks. This provides a structured basis for restoring the control project used by an existing Phoenix Contact Inline installation and for coordinating machine sequences through the controller.
Project code and parameterization can be retained through controller project and parameter backup. During replacement commissioning, restore the compatible project and parameters, then align the software, firmware, IP configuration and Inline bus hardware layout with the existing installation.
Communication and System Integration
An integrated Ethernet interface supports system communication and controller coupling with Ethernet-connected controllers and automation systems. The controller also supports INTERBUS communication, allowing it to operate within installations that combine the Inline local bus with Inline/INTERBUS participants.
The integrated Inline local bus supports up to 512 total participants, including up to 254 Inline/INTERBUS participants. When checking a replacement, compare the installed Phoenix Contact Inline I/O modules, participant arrangement and communication requirements with the controller project and parameter configuration.
Replacement and Spare Part Considerations
A replacement for the Phoenix Contact 2737203 ILC 350 ETH should match the exact part number and the existing Inline Controller application. Before commissioning, check the 24 V DC supply, Inline I/O and local bus arrangement, Ethernet and INTERBUS communication requirements, project parameters, IP configuration and the compatible software and firmware combination.
The controller supports project and parameter backup and restore, which can support an existing-controller replacement workflow. The spare still requires configuration transfer and commissioning against the installed Inline bus hardware layout; matching the controller alone does not establish the complete machine configuration.
Frequently Asked Questions
What is the Phoenix Contact 2737203 ILC 350 ETH?
The 2737203 is an ILC 350 ETH Inline Controller and PLC CPU/controller for modular automation systems. It integrates with Phoenix Contact Inline I/O modules and provides Ethernet and INTERBUS communication.
Which supply voltage does the ILC 350 ETH use?
The rated supply voltage is 24 V DC, with a supply voltage range of 20.4 to 30 V DC. Typical current consumption is 250 mA.
What must be transferred when replacing a 2737203 controller?
The replacement workflow includes restoring the compatible controller project and parameters and aligning the software, firmware, IP configuration and Inline bus hardware layout with the existing installation.
Which communication systems does the ILC 350 ETH support?
The controller supports Ethernet and INTERBUS communication. Its integrated Ethernet interface is intended for system communication and controller coupling, while the Inline local bus supports up to 512 total participants and up to 254 Inline/INTERBUS participants.
How many control tasks does the ILC 350 ETH support?
The ILC 350 ETH supports up to 16 control tasks and is programmable according to IEC 61131-3.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Phoenix Contact.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



