Philips 9465 826 00121 CVI200 V2.0 INTERBUS PLC

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Philips 9465 826 00121 is a CVI200 Version 2.0 PLC card and communication interface module for existing Philips Process and Machinery Automation equipment. It supports control installations that use INTERBUS fieldbus communication and is intended primarily for maintaining legacy industrial automation systems. The exact part number and Version 2.0 designation are key identification points when matching this PLC card to an installed cabinet.

When preparing a replacement, match the complete Philips part number, CVI200 Version 2.0 hardware revision and INTERBUS communication requirement against the installed system. The spare should be treated as a replacement component for an existing configuration rather than a universal PLC module. The CVI200-DP Version 2.0 is a separate product, so the fieldbus type and complete part number must be checked before commissioning.

This Philips PLC card is suited to repair, spare-part stocking and like-for-like replacement in legacy machinery. Before installation, verify the label, hardware revision, fieldbus protocol and the firmware requirements of the existing CVI200 system. As a discontinued component, the 9465 826 00121 is most relevant where maintaining the original Philips control architecture is preferable to replacing the complete automation system.

Technical Specifications

ManufacturerPhilips
Part number9465 826 00121
Model/typeCVI200 Version 2.0
Component typePLC card and communication interface module
Product familyPhilips Process and Machinery Automation
Fieldbus protocolINTERBUS
Hardware revisionVersion 2.0
Lifecycle statusDiscontinued

Communication and System Integration

The Philips 9465 826 00121 is associated with INTERBUS fieldbus communication within the CVI200 platform. This protocol is a primary compatibility point for installations where the PLC card exchanges data through an existing INTERBUS-based control architecture.

Before fitting a replacement, compare the fieldbus requirement of the installed system with the INTERBUS capability of this CVI200 Version 2.0 card. The CVI200-DP Version 2.0 uses a different product designation, so matching the complete part number and communication protocol helps prevent an incompatible exchange.

Replacement and Spare Part Considerations

Use the complete part number 9465 826 00121, the CVI200 Version 2.0 designation and the INTERBUS protocol when checking a replacement. Confirm that the installed Philips Process and Machinery Automation system requires this exact PLC card and communication interface module.

The replacement process should include a check of the installed hardware revision and firmware requirements before commissioning. Because this component is discontinued, a matching spare is particularly relevant for maintaining an existing cabinet and avoiding an immediate controls retrofit.

The 9465 826 00121 should not be confused with the separate CVI200-DP Version 2.0 product. Confirming the label, revision and fieldbus type before installation helps reduce the risk of fitting the wrong legacy PLC card.

Frequently Asked Questions

What is the Philips 9465 826 00121?

It is a Philips CVI200 Version 2.0 PLC card and communication interface module for Process and Machinery Automation equipment using INTERBUS fieldbus communication.

Which protocol does the Philips CVI200 9465 826 00121 use?

The card is associated with INTERBUS fieldbus communication. The installed system should be checked to confirm that INTERBUS is the required fieldbus type.

What should be checked before replacing a CVI200 PLC card?

Check the complete part number 9465 826 00121, the CVI200 Version 2.0 hardware revision, the INTERBUS protocol and the firmware requirements of the installed system.

Is the Philips 9465 826 00121 a current product?

The component is discontinued and is intended for maintenance, repair, like-for-like replacement and spare-part stocking in existing Philips CVI200 installations.

Is the CVI200-DP Version 2.0 the same replacement?

No. CVI200-DP Version 2.0 is a separate product designation. Match the complete part number and fieldbus protocol before selecting a replacement.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Philips.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.