SICK 1019600 S30A-6011DA S3000 Safety Laser Scanner
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The SICK 1019600 S30A-6011DA is a S3000 Professional safety laser scanner for machine access protection and hazardous-area monitoring. It uses a pulsed laser diode with a 905 nm wavelength to scan a 190° angle, providing a 5.5 m protective field and 30 mm resolution for presence detection around automated production cells, robotic work areas, conveyors and material handling equipment. The warning field extends to 49 m for approach monitoring.
The scanner supports 24 configurable field sets for different machine operating conditions and has a response time of 60 ms. Power, OSSD safety outputs, diagnostic signals and configuration are connected through the system plug. Part number 1019600 identifies the sensor head, so a compatible system plug is required for operation and must be ordered separately or reused from the existing installation. Configuration parameters are retained in non-volatile memory integrated in the system plug or scanner head, supporting configuration transfer when a compatible replacement is installed.
The S30A-6011DA operates from a nominal 24 V DC supply and provides two PNP OSSD safety outputs together with three PNP diagnostic outputs. SICK CDS Configuration & Diagnostic Software supports field-set configuration, parameterization and diagnostic review. For troubleshooting, check the supply, system connection and safety or diagnostic output wiring, then review the software diagnostic logs and output signals before deciding whether the sensor head or the system connection requires repair or exchange.
Technical Specifications
| Manufacturer | SICK |
| Part number | 1019600 |
| Model/type | S30A-6011DA |
| Component type | Safety laser scanner |
| Product family | S3000 Professional |
| Protective field range | 5.5 m |
| Warning field range | 49 m |
| Scanning angle | 190 deg |
| Resolution | 30 mm |
| Configurable field sets | 24 |
| Response time | 60 ms |
| Light source | Pulsed laser diode |
| Light source wavelength | 905 nm |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 16.8 to 28.8 V DC |
| Digital outputs | 5 total: 2 PNP OSSD safety outputs and 3 PNP diagnostic outputs |
| OSSD output current | 500 mA per output |
| Diagnostic output current | 100 mA per output |
| Current consumption without load | 0.8 A |
| Maximum current consumption | 2.3 A |
| System connection | System plug for power, OSSD safety outputs, diagnostic signals, and configuration |
| System plug requirement | System plug required; ordered separately or reused from an existing installation |
| Configuration storage | Non-volatile memory integrated in the system plug or scanner head |
Programming and Configuration
SICK CDS Configuration & Diagnostic Software is used for field-set configuration, parameterization and diagnostic review of the S30A-6011DA. The scanner supports 24 configurable field sets, allowing protective and warning fields to be set for different machine operating conditions.
Configuration parameters are retained in non-volatile memory integrated in the system plug or scanner head. When a compatible replacement sensor head is installed, the existing system plug may retain the configuration, subject to compatibility with the replacement installation.
Communication and System Integration
The S30A-6011DA uses a system plug for power, configuration, two PNP OSSD safety outputs and three PNP diagnostic outputs. The OSSD outputs are rated at 500 mA per output, while each diagnostic output is rated at 100 mA.
Integration checks should include the system plug, supply connection, OSSD safety-output wiring and diagnostic-output wiring. SICK CDS Configuration & Diagnostic Software provides diagnostic review through the connected scanner.
Diagnostics and Status Indication
Diagnostic review is performed with SICK CDS Configuration & Diagnostic Software, using software diagnostic logs and the scanner's diagnostic output signals. The three PNP diagnostic outputs are rated at 100 mA per output.
During troubleshooting, check the 16.8 to 28.8 V DC supply range, the system plug connection and the wiring to the OSSD and diagnostic outputs. SICK CDS can then be used to review the scanner configuration and diagnostic logs.
Replacement and Spare Part Considerations
Verify the SICK part number 1019600, model S30A-6011DA and S3000 Professional family before ordering a replacement. This part number represents the sensor head only; a compatible system plug is required and may need to be purchased separately or transferred from the existing installation.
Before commissioning a spare, confirm the system plug, power connection, OSSD safety outputs, diagnostic outputs and field-set configuration. Non-volatile configuration storage in the system plug or scanner head can support configuration retention when the replacement is compatible with the existing installation.
Frequently Asked Questions
What is the SICK 1019600 S30A-6011DA?
It is a S3000 Professional safety laser scanner with a 5.5 m protective field, 49 m warning field, 190 deg scanning angle and 30 mm resolution.
Does the SICK 1019600 include the system plug?
Part number 1019600 represents the sensor head. A compatible system plug is required for operation and must be ordered separately or reused from the existing installation.
Which software is used to configure the S30A-6011DA?
SICK CDS Configuration & Diagnostic Software is used for field-set configuration, parameterization and diagnostic review.
How many field sets can the S30A-6011DA configure?
The scanner supports 24 configurable field sets.
What should be checked when commissioning a replacement scanner?
Verify the part number, model, compatible system plug, 24 V DC supply connection, OSSD safety-output wiring, diagnostic-output wiring and retained field-set configuration.
How can the S30A-6011DA be diagnosed?
Use SICK CDS Configuration & Diagnostic Software, review its software diagnostic logs and check the scanner's diagnostic output signals.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Sick.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.