SICK 1044074 FX0-GPNT00000 PROFINET Gateway

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: Flexi Soft

The SICK 1044074 FX0-GPNT00000 is a PROFINET communication gateway module for the Flexi Soft modular safety controller family. It connects Flexi Soft safety control systems with PROFINET industrial Ethernet networks and supports the exchange of safety-system information within an industrial automation architecture. The module provides two RJ45 female Ethernet ports and supports EFI, Enhanced Functional Interface, for safe communication with compatible SICK safety devices. It has a power consumption of 2.4 W, with IP20-rated terminals and an IP40-rated enclosure housing.

A replacement FX0-GPNT00000 is commissioned through Flexi Soft Designer, the license-free software used for Flexi Soft configuration, programming and diagnostics. The Flexi Soft system plug provides non-volatile storage for the system configuration and supports backup and restoration, allowing the configuration to be transferred to an identical replacement gateway module. During replacement, check the exact part number and model, then confirm that the PROFINET station name and network parameters match the existing installation.

For troubleshooting, Flexi Soft Designer provides software diagnostics and the PROFINET fieldbus provides network diagnostics. Check the gateway identity, system plug configuration, PROFINET connection and network parameters when a replacement does not integrate as expected. Compatibility should be checked with the installed Flexi Soft system, connected SICK safety devices and PROFINET controller before fitting a spare or exchange unit.

Technical Specifications

ManufacturerSICK
Part number1044074
Model/typeFX0-GPNT00000
Product familyFlexi Soft
Component typePROFINET communication gateway module
Communication functionPROFINET fieldbus gateway
Communication protocolPROFINET
PROFINET interface2 x RJ45 female Ethernet ports
Safety communicationEFI, Enhanced Functional Interface
Power consumption2.4 W
Configuration storageNon-volatile system plug storage with backup and restore support
Terminal protection ratingIP20
Enclosure protection ratingIP40
Product lifecycle statusActive, commercialized

Programming and Configuration

Flexi Soft Designer is the license-free engineering software used to configure, program and diagnose the FX0-GPNT00000 within a Flexi Soft safety controller system. Configuration work includes the gateway and its integration with the PROFINET network and compatible SICK safety devices using EFI.

The Flexi Soft system plug stores the system configuration in non-volatile memory and supports backup and restoration. When an identical gateway module is installed, this stored configuration can be transferred to the replacement, reducing the need to recreate the Flexi Soft project during commissioning.

Communication and System Integration

The FX0-GPNT00000 connects a Flexi Soft modular safety controller system to a PROFINET industrial Ethernet network through two RJ45 female Ethernet ports. Its communication function is a PROFINET fieldbus gateway for exchanging safety-system information within the machine network.

EFI, or Enhanced Functional Interface, provides safe communication with compatible SICK safety devices. Before integration or replacement, confirm compatibility with the installed Flexi Soft system, connected SICK devices and PROFINET controller, and match the PROFINET station name and network parameters to the existing configuration.

Diagnostics and Status Indication

Diagnostics for the FX0-GPNT00000 are available through Flexi Soft Designer and through PROFINET fieldbus diagnostics. These methods support checks of the gateway configuration and its network integration during commissioning, replacement and fault investigation.

Replacement and Spare Part Considerations

Use the identical SICK 1044074 FX0-GPNT00000 model when replacing the gateway module. The replacement must match the installed Flexi Soft system, connected SICK safety devices using EFI and the PROFINET controller. Confirm the part number, model and communication interfaces before installation.

The Flexi Soft system plug provides non-volatile configuration storage with backup and restore support. This allows the stored system configuration to be transferred to an identical replacement gateway module, while the PROFINET station name and network parameters still need to match the existing network configuration.

After fitting the spare, use Flexi Soft Designer for configuration and diagnostics, then check the PROFINET network connection and communication with the connected Flexi Soft and SICK safety devices. The module has IP20-rated terminals and an IP40-rated enclosure housing, so installation must suit the control cabinet or protected automation enclosure.

Frequently Asked Questions

What is the SICK 1044074 FX0-GPNT00000 used for?

It is a PROFINET communication gateway module for the SICK Flexi Soft modular safety controller family. It connects Flexi Soft safety control systems to PROFINET networks and supports EFI safe communication with compatible SICK safety devices.

Which interfaces are available on the FX0-GPNT00000?

The module provides two RJ45 female Ethernet ports for PROFINET fieldbus communication.

Which software is used to configure the SICK FX0-GPNT00000?

Flexi Soft Designer is used for configuration, programming and diagnostics. It is license-free for the Flexi Soft product family.

Can the configuration be transferred to an identical replacement gateway?

Yes. The Flexi Soft system plug stores the system configuration in non-volatile memory and supports backup and restoration. The replacement must be an identical gateway model, and the PROFINET station name and network parameters must match the existing configuration.

How can the FX0-GPNT00000 be diagnosed?

Use Flexi Soft Designer for software diagnostics and PROFINET fieldbus diagnostics for network-related checks.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Sick.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.