Kawasaki 1TB-92 Internal I/O PCB Board for RS03 Robots

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Kawasaki 1TB-92 is an internal mixed I/O PCB board for Kawasaki RS03 robot systems equipped with E Series Controllers. It provides four user sensor input channels and supports up to four optional built-in valve control outputs, extending robot-side sensing and valve control within compatible Kawasaki robotic equipment. The board is associated with Kawasaki E70, E73, and E76 Series Controllers and forms part of the Kawasaki Robot Arm Internal I/O Boards family.

A replacement 1TB-92 must be matched to an RS03 robot system with a compatible E70, E73, or E76 controller. Internal connections include X401 for user sensor inputs, X592 for built-in valve outputs, X4 for the internal I/O board interconnect, X514-B for internal board signaling, and X3 for the internal controller connection. Auxiliary function 0610 configures the board, with user sensor inputs assigned to IN13-IN16 when enabled, so installation requires the correct connector arrangement and controller configuration.

The 1TB-92 is relevant when replacing a failed or damaged internal I/O board, restoring sensor feedback, or restoring supported built-in valve control in a Kawasaki RS03 robot system. Before commissioning a spare, check the robot and controller combination, confirm the internal connectors, and verify the Auxiliary function 0610 configuration. Correct signal allocation and connection of the sensor and valve interfaces are essential to returning the internal I/O functions to service.

Technical Specifications

ManufacturerKawasaki
Part number1TB-92
Model/typePCB Board
Component typeMixed I/O Module
Product familyKawasaki Robot Arm Internal I/O Boards
Digital inputs4 inputs
Digital outputs4 outputs
Robot system compatibilityKawasaki RS03 robots with E70, E73, or E76 controllers
Configuration functionAuxiliary function 0610
Signal allocationUser sensor inputs are assigned to IN13-IN16 when enabled
User sensor input connectorX401
Built-in valve output connectorX592
Internal I/O board connectorX4
Internal board interface connectorX514-B
Internal controller connectorX3

Programming and Configuration

The 1TB-92 is configured through Kawasaki Auxiliary function 0610. When the user sensor inputs are enabled, they are allocated to signals IN13 through IN16. This allocation must correspond with the intended sensor connections in the RS03 robot system.

Commissioning a replacement includes checking the Auxiliary function 0610 setting, confirming the IN13-IN16 signal allocation, and matching the internal sensor and valve connections to the board connectors. The required interfaces are X401 for user sensors and X592 for optional built-in valve outputs.

Communication and System Integration

The Kawasaki 1TB-92 integrates internally with compatible RS03 robot systems using dedicated board and controller interfaces. Connector X4 is used for the internal I/O board interconnect, X514-B for internal board signaling, and X3 for the internal controller connection.

External machine-side functions connect through X401 for the user sensor inputs and X592 for the built-in valve outputs. The board provides four sensor inputs and supports up to four optional valve outputs in Kawasaki RS03 systems using E70, E73, or E76 controllers.

Replacement and Spare Part Considerations

Use the Kawasaki 1TB-92 as a replacement only where the robot system is a Kawasaki RS03 model with an E70, E73, or E76 controller. Confirm the part number, controller type, internal connector arrangement, and required sensor or valve functions before fitting the spare.

After installation, check X401, X592, X4, X514-B, and X3 against the intended wiring arrangement and configure Auxiliary function 0610 as required. Confirm that the sensor inputs are allocated to IN13-IN16 when enabled and that the optional built-in valve outputs are connected through the correct interface.

Frequently Asked Questions

What is the Kawasaki 1TB-92 used for?

The Kawasaki 1TB-92 is an internal mixed I/O PCB board for Kawasaki RS03 robot systems. It provides four user sensor inputs and supports up to four optional built-in valve outputs.

Which Kawasaki controllers are compatible with the 1TB-92?

The 1TB-92 is specified for Kawasaki RS03 robots with E70, E73, or E76 Series Controllers.

How are the 1TB-92 sensor inputs assigned?

When enabled through Kawasaki Auxiliary function 0610, the four user sensor inputs are assigned to signals IN13 through IN16.

Which connectors should be checked when replacing a 1TB-92?

Check X401 for user sensor inputs, X592 for built-in valve outputs, X4 for the internal I/O board interconnect, X514-B for internal board signaling, and X3 for the internal controller connection.

Does a replacement 1TB-92 require configuration?

Yes. The replacement requires the compatible RS03 and E70, E73, or E76 controller combination, correct internal connections, and the appropriate Auxiliary function 0610 configuration.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Kawasaki.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.