Siemens 6FC5203-0AC00-0AA2 SINUMERIK CNC Full Operator Keyboard

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6FC5203-0AC00-0AA2 is a SINUMERIK CNC full operator keyboard and HMI component for legacy FM-NC, 810D, 810DE, 840D and 840DE control systems. It provides a standard US QWERTY layout for entering machine commands, parameters and operator data at a CNC operator station. The keyboard uses a 19-inch panel mounting format and is identified for applications including Siemens OP010 operator panels.
This Siemens CNC keyboard has an integrated 1.5 m cable and a selectable XT/AT keyboard interface. The attached cable uses a standard keyboard connector, while the XT/AT selection allows the interface configuration to be matched to the connected CNC controller. Before commissioning a replacement, transfer the existing operator input arrangement to the new unit and confirm that the selected interface mode and US QWERTY character mapping correspond to the machine control.
The 6FC5203-0AC00-0AA2 is intended for replacement and maintenance of existing SINUMERIK operator stations, including 19-inch CNC control panels and legacy machine-tool installations. During troubleshooting after installation, check the selected XT/AT mode, the attached cable connection and the compatibility of the keyboard layout with the FM-NC, 810D/DE or 840D/DE control system. The part is discontinued and is suited to repair, retrofit and spare-part requirements where the original keyboard format and interface characteristics must be retained.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6FC5203-0AC00-0AA2 |
| Model/type | SINUMERIK FM-NC/810D/DE/840D/DE CNC FULL KEYBOARD IN QWERTY DESIGN, WITH 1.5 M CABLE STANDARD/US |
| Product family | SINUMERIK |
| Component type | CNC operator keyboard / HMI |
| Keyboard layout | QWERTY |
| Keyboard region | US standard |
| Panel mounting width | 19 in |
| Cable length | 1.5 m |
| Keyboard interface | XT/AT selectable |
| Interface connection | Attached cable with standard keyboard connector |
| Lifecycle status | Discontinued |
Communication and System Integration
The keyboard connects through its integrated 1.5 m cable with a standard keyboard connector. Its XT/AT selectable interface is intended for controller-specific keyboard input requirements in SINUMERIK FM-NC, 810D, 810DE, 840D and 840DE control environments.
For system integration, match the XT/AT selection to the connected CNC controller and confirm that the 19-inch panel mounting format suits the operator station. The keyboard is identified for Siemens OP010 operator panel applications and for CNC control panels using the corresponding SINUMERIK architecture.
Replacement and Spare Part Considerations
Use the complete part number 6FC5203-0AC00-0AA2 and compare the replacement with the installed keyboard before fitting it. The key checks are the SINUMERIK FM-NC, 810D/DE or 840D/DE control environment, the US standard QWERTY layout, the 19-inch panel mounting format, the integrated 1.5 m cable and the XT/AT interface requirement.
Commissioning a spare requires the XT/AT selection to match the CNC controller and the cable to be connected through the standard keyboard connector. Confirm the keyboard character mapping and operator-panel arrangement before returning the machine to service. The discontinued status makes this part relevant to repair, retrofit and maintenance of existing installations that require the original format.
Frequently Asked Questions
Which CNC systems are compatible with the Siemens 6FC5203-0AC00-0AA2 keyboard?
The keyboard is intended for Siemens SINUMERIK FM-NC, 810D, 810DE, 840D and 840DE control systems. It is also identified for OP010 operator panel applications.
What keyboard layout does the 6FC5203-0AC00-0AA2 use?
It uses a full-size standard US QWERTY layout for CNC operator input.
How is the keyboard connected to the CNC control system?
The keyboard has an integrated 1.5 m cable with a standard keyboard connector. Its interface mode is selectable between XT and AT.
What should be checked before commissioning a replacement keyboard?
Confirm the exact part number, 19-inch panel mounting format, US QWERTY layout, cable connection and XT/AT selection. The selected interface mode must match the connected SINUMERIK CNC controller.
Is the Siemens 6FC5203-0AC00-0AA2 still available as a current product?
The part is discontinued and is used for maintaining, repairing and retrofitting existing SINUMERIK operator stations and CNC control panels.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



