ABB SensyCal FCU400-S – Steam Flow and Thermal Output Computer

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SensyCal

The ABB SensyCal FCU400-S is an industrial flow and thermal measurement computer for calculating steam flow, thermal output and energy balances. It processes flow and temperature values for superheated or saturated steam applications and uses the IAPWS-IF97 standard for steam and water density and enthalpy calculations. The unit supports precise temperature measurement through 4-wire Pt100 sensors and includes a high-resolution multi-line graphic display for physical and electrical process variables.

A replacement FCU400-S must match the installed measurement and communication configuration. The computer provides an integrated front optical infrared interface and M-Bus communication, while optional RS-485 enables Modbus RTU and PROFIBUS integration is supported through an external signal converter. FCOM200 is used for configuration and parameterization. Before commissioning a spare, transfer or restore the required parameters and verify the connected Pt100 sensors, metering network and selected communication option. Internal non-volatile memory preserves counter readings and logged parameters through power failures.

For troubleshooting, use the high-resolution display and FCOM200 to review physical and electrical process variables and the configured parameters. The FCU400-S automatically stops energy counting when it detects a sensor break, short circuit or no-flow condition, helping prevent invalid energy totals. Check the temperature sensor circuit, the flow condition and the communication connection when measurement or energy counting is interrupted. The FCU400-S is a discontinued ABB product, so repair, a tested spare or an exchange unit may be relevant when an installed computer fails; fiscal metering circuits must meet applicable PTB certification requirements.

Technical Specifications

ManufacturerABB
Part numberFCU400-S
Model/typeSteam, flow and thermal output computer
Component typeIndustrial flow and thermal measurement computer
Product familySensyCal
Steam and water calculation standardIAPWS-IF97
Temperature sensor inputPt100, 4-wire
Maximum data logger variables27 variables
Data logger time periods128 time periods
Billing date records2 dates
Maximum active current outputs8 outputs
Maximum current inputs with transmitter supply8 inputs
Maximum voltage or current inputs without transmitter supply12 inputs
Infrared interfaceIntegrated front optical interface
M-Bus communicationIntegrated
RS-485 interfaceOptional
Modbus RTU communicationOptional via RS-485
PROFIBUS communicationSupported via external signal converter
Configuration and parameterization softwareFCOM200
Configuration storageInternal non-volatile memory with power-failure data preservation
Energy counter protectionAutomatic counter stoppage during sensor break, short circuit or no-flow conditions
Product lifecycle statusDiscontinued
Fiscal metering requirementMeasurement devices in the circuit must meet applicable PTB certification requirements

Programming and Configuration

FCOM200 is the communication program used for configuration and parameterization of the ABB SensyCal FCU400-S. The integrated front optical interface provides the local connection for this work.

The FCU400-S records up to 27 operating variables across 128 time periods and stores two billing-date records. Its internal non-volatile memory preserves counter readings and logged parameters during power failures, supporting configuration and measurement continuity after an interruption.

When commissioning a replacement, transfer or restore the required parameters and check the configured sensor, flow and communication settings before returning the unit to service.

Communication and System Integration

The FCU400-S includes integrated M-Bus communication for metering networks and an integrated front optical infrared interface for local configuration and parameterization.

An optional RS-485 interface provides Modbus RTU communication. PROFIBUS integration is supported through an external signal converter, so the installed communication arrangement must be checked when selecting a spare.

The computer accepts precise temperature signals from 4-wire Pt100 sensors and can be integrated into steam measurement, metering and automation systems through the applicable interface configuration.

Diagnostics and Status Indication

The high-resolution multi-line graphic display shows physical and electrical process variables. FCOM200 provides configuration and parameterization functions that support review of the installed settings.

The FCU400-S automatically stops the energy counter when it detects a sensor break, short circuit or no-flow condition. For interrupted measurement or energy counting, check the 4-wire Pt100 sensor circuit, the flow condition and the relevant M-Bus, RS-485 or PROFIBUS connection.

Replacement and Spare Part Considerations

The replacement must be an ABB SensyCal FCU400-S and must match the installed configuration, including the 4-wire Pt100 temperature measurement, integrated M-Bus arrangement and any optional RS-485 Modbus RTU interface. Where PROFIBUS is used, verify the external signal converter arrangement as part of the replacement check.

Commissioning requires FCOM200 configuration and parameterization. Restore the required measurement and communication parameters, then check the display values and energy-counter behavior under the connected sensor and flow conditions. Internal non-volatile memory preserves counter readings and logged parameters through power failures.

The FCU400-S is discontinued. A repair, tested spare or exchange unit can therefore be relevant for maintaining an existing installation, while fiscal metering use requires the measurement devices in the complete circuit to meet applicable PTB certification requirements.

Frequently Asked Questions

What is the ABB SensyCal FCU400-S used for?

It calculates steam flow, thermal output and energy balances for superheated or saturated steam applications using IAPWS-IF97 steam and water density and enthalpy calculations.

Which software is used to configure the FCU400-S?

FCOM200 is used for configuration and parameterization through the integrated front optical infrared interface.

Which communication interfaces are available on the FCU400-S?

The unit has integrated M-Bus communication and a front optical infrared interface. Optional RS-485 supports Modbus RTU, while PROFIBUS is supported through an external signal converter.

What should be checked when the FCU400-S stops energy counting?

Check the 4-wire Pt100 sensor circuit and the flow condition. The FCU400-S automatically stops energy counting when it detects a sensor break, short circuit or no-flow condition.

How much historical data can the FCU400-S record?

The integrated data logger records up to 27 operating variables across 128 time periods and provides two billing-date records.

Is the FCU400-S a current product?

The ABB SensyCal FCU400-S is a discontinued product. Replacement selection should include the installed sensor, communication and configuration requirements.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of ABB.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.