Siemens 1FK7083-2AC71-1UB1 SIMOTICS S Servomotor

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 1FK7083-2AC71-1UB1 is a 1FK7 synchronous servomotor in the SIMOTICS S product family. Designed for precise industrial motion control, it delivers 2.6 kW rated output, 2000 rpm rated speed and 12.5 Nm rated torque, with a 16 Nm static torque rating. Natural cooling supports installation without a separate forced-cooling arrangement where the machine conditions permit. The motor is used in automated equipment such as packaging and converting machinery, machine tools, material-handling systems and production equipment.
Replacement commissioning depends on matching the motor to a compatible Siemens motion-control drive system and control architecture. The integrated DRIVE-CLiQ encoder, identified as DQI, provides motor feedback and drive communication, while its non-volatile electronic nameplate stores motor parameters. This can reduce manual parameter entry during commissioning, but the encoder configuration and the motor connection must still match the installed system. Confirm the motor part number, DRIVE-CLiQ compatibility, shaft dimensions and flange dimensions before installing a spare.
For a replacement 1FK7 servomotor, first compare the existing motor identification and the required 2.6 kW, 2000 rpm and 12.5 Nm ratings. Check the DRIVE-CLiQ feedback arrangement, motor wiring and mechanical fit before commissioning, then allow the associated drive system to use the motor parameters stored in the electronic nameplate. Compatibility checks are especially important when restoring a failed servo axis or preparing a spare for automated production equipment.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 1FK7083-2AC71-1UB1 |
| Model/type | 1FK7 Servomotor |
| Component type | Synchronous servomotor |
| Product family | SIMOTICS S |
| Rated power | 2.6 kW |
| Rated speed | 2000 rpm |
| Rated torque | 12.5 Nm |
| Static torque | 16 Nm |
| Rated current | 6.3 A |
| DC-link operating voltage | 600 V DC |
| Number of poles | 8 |
| Cooling method | Natural cooling |
| Encoder feedback | Integrated DRIVE-CLiQ encoder (DQI) |
| Drive communication protocol | DRIVE-CLiQ |
| Electronic nameplate | Non-volatile motor parameter storage in encoder |
| Lifecycle status | Active |
Communication and System Integration
The 1FK7083-2AC71-1UB1 uses an integrated DRIVE-CLiQ encoder for feedback transmission and communication with the associated Siemens motion-control drive system. The encoder configuration is identified as DQI, making the feedback interface a key point when checking compatibility with an existing servo axis.
The encoder contains a non-volatile electronic nameplate with motor parameters. In a compatible DRIVE-CLiQ architecture, this motor identification data supports commissioning and can reduce manual entry of motor parameters. The drive system, feedback configuration and motor connection must match the installed control architecture.
Replacement and Spare Part Considerations
Use the complete Siemens part number 1FK7083-2AC71-1UB1 when identifying a replacement. The rated power, speed, torque, integrated DQI DRIVE-CLiQ encoder and natural cooling method should correspond to the motor installed in the machine. Also compare the shaft and flange dimensions before fitting the spare.
After installation, check the connection to the compatible Siemens motion-control drive system and confirm that the DRIVE-CLiQ feedback arrangement is suitable. The non-volatile electronic nameplate stores motor parameters in the encoder, supporting a more efficient commissioning process when the drive architecture can read the motor identification data.
This active SIMOTICS S motor is relevant for spare-part preparation, servo-axis restoration and replacement in packaging, machine-tool, material-handling and production equipment. A replacement decision should include both electrical and mechanical compatibility rather than relying on the 1FK7 family name alone.
Frequently Asked Questions
What is the Siemens 1FK7083-2AC71-1UB1?
It is a Siemens 1FK7 synchronous servomotor from the SIMOTICS S product family, with 2.6 kW rated output, 2000 rpm rated speed and 12.5 Nm rated torque.
Which feedback interface does this 1FK7 servomotor use?
The motor has an integrated DRIVE-CLiQ encoder identified as DQI. It provides motor feedback and communication with compatible Siemens motion-control drive systems.
Does the motor store its own parameters?
Yes. The encoder contains a non-volatile electronic nameplate that stores motor parameters and can reduce manual parameter entry during commissioning in a compatible DRIVE-CLiQ architecture.
What should be checked before ordering a replacement?
Check the complete part number, rated power, speed, torque, DQI DRIVE-CLiQ feedback configuration, shaft dimensions and flange dimensions against the existing motor and machine installation.
How is the Siemens 1FK7083-2AC71-1UB1 cooled?
The servomotor uses natural cooling.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



