Indramat R911281879 MKD025A-144-KP0-KN AC Synchronous Servo Motor

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: MKD Synchronous Motors

The Indramat R911281879, model MKD025A-144-KP0-KN, is an AC synchronous servo motor from the MKD Synchronous Motors family. It provides 0.4 kW of rated power, a maximum speed of 6000 rpm and continuous standstill torque of 0.4 Nm for precise, high-speed motion in industrial machine axes. The motor uses natural-convection cooling, a 54 mm flange, a 40 mm centering diameter and a keyed output shaft with a DIN 6885-1 keyway and shaft sealing ring. No holding brake is fitted.

Replacement commissioning depends on matching the motor to the installed Indramat drive system. The R911281879 uses winding code 144 and multi-turn resolver feedback with integrated non-volatile motor data memory. A compatible ECODRIVE or DIAX04 drive controller can read the motor operating data automatically during power-up, while the resolver provides position feedback and absolute position detection over more than 4096 revolutions. The winding code, resolver requirement, keyed shaft, sealing ring and absence of a holding brake should all match the motor being replaced.

For troubleshooting, check the resolver feedback connection and the motor-to-drive compatibility before commissioning. The integrated winding temperature sensor supports thermal overload monitoring, and the drive can identify the motor through its stored data during power-up. IP65 protection applies when cables are correctly mounted. The discontinued R911281879 is relevant for repair, exchange and spare-motor requirements on legacy Indramat machine axes, including packaging, assembly and material-handling equipment.

Technical Specifications

ManufacturerIndramat
Part numberR911281879
Model/typeMKD025A-144-KP0-KN
Component typeAC synchronous servo motor
Product familyMKD Synchronous Motors
Rated power0.4 kW
Rated current0.7 A
Rated voltage97 V
Maximum speed6000 rpm
Continuous standstill torque0.4 Nm
Feedback typeMulti-turn resolver with integrated data memory
Absolute position detectionOver 4096 revolutions
Winding code144
Winding temperature monitoringIntegrated thermal sensor
Cooling methodNatural convection
Holding brakeNot fitted
Flange size54 mm
Centering diameter40 mm
Shaft configurationKeyway according to DIN 6885-1 with shaft sealing ring
Ingress protection ratingIP65 when cables are correctly mounted

Diagnostics and Status Indication

The R911281879 provides diagnostic support through its integrated winding temperature sensor, multi-turn resolver and motor data memory. The thermal sensor supports monitoring for winding temperature and thermal overload conditions, while resolver feedback supplies position information to the compatible drive controller.

During power-up, a compatible Indramat ECODRIVE or DIAX04 drive controller can read the motor operating data stored in the integrated memory. For a replacement motor, verify the resolver connection and winding code 144, then confirm that the drive identifies the motor correctly before returning the machine axis to operation.

Replacement and Spare Part Considerations

Use the complete identification R911281879 and MKD025A-144-KP0-KN when checking a spare or exchange motor. Compatibility depends on the installed Indramat ECODRIVE or DIAX04 drive controller, winding code 144, multi-turn resolver feedback and the mechanical configuration. The replacement should also match the keyed shaft with DIN 6885-1 keyway, shaft sealing ring, 54 mm flange, 40 mm centering diameter and no holding brake.

Before commissioning, check the motor data readout during drive power-up and confirm the resolver feedback connection. The integrated data memory can provide the motor operating data to a compatible drive controller, but the motor and drive combination must still be checked against the machine configuration. IP65 protection applies only when cables are correctly mounted.

As a discontinued Indramat motor, the R911281879 is typically handled as a specialist spare, repair or exchange requirement for legacy automation equipment. A complete replacement motor or certified repair route can be relevant when the installed motor has an internal fault.

Frequently Asked Questions

What is the Indramat R911281879?

The R911281879 is the Indramat MKD025A-144-KP0-KN, an AC synchronous servo motor with 0.4 kW rated power, 6000 rpm maximum speed and multi-turn resolver feedback.

Which drive controllers are compatible with this MKD servo motor?

The motor is associated with the Indramat ECODRIVE and DIAX04 drive controller families. The winding code 144 and multi-turn resolver requirement must be matched during replacement.

How is the replacement motor identified during commissioning?

A compatible ECODRIVE or DIAX04 drive controller can read the motor operating data automatically during power-up from the integrated non-volatile data memory.

What should be checked before installing a spare R911281879?

Check the part number and model, winding code 144, resolver feedback, keyed shaft with DIN 6885-1 keyway, shaft sealing ring, 54 mm flange, 40 mm centering diameter and absence of a holding brake.

Does the R911281879 include a holding brake?

No. The MKD025A-144-KP0-KN has no holding brake fitted.

How can the motor be checked during troubleshooting?

Check the resolver feedback connection, confirm compatibility with the installed drive and review the motor data readout during power-up. The integrated winding temperature sensor supports thermal overload monitoring.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Indramat.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.