Omron NS5-MQ11-V2 Interactive Display HMI

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Omron NS5-MQ11-V2 is an Interactive Display and Human-machine interface (HMI) for machine operator panels and industrial automation equipment. This NS Series terminal combines a 5.7-inch monochrome STN touchscreen with a 320 × 240 pixel resolution and 16 display gradations. The 24 V DC terminal provides a practical interface for displaying machine status, entering operator commands and managing HMI screens where an existing monochrome NS5 installation must be maintained.
A replacement NS5-MQ11-V2 connects to the PLC or automation network through its built-in 10/100Base-T Ethernet interface with RJ45 connector. HMI projects can be transferred from a PC using Omron CX-Designer or through the built-in Memory Card slot, which supports project transfer, backup, restoration and system expansion. Before commissioning a spare, transfer the applicable project and confirm that the 320 × 240 pixel, 16-gradation monochrome layout is compatible with the existing installation.
The terminal has a 20 MB internal capacity for screen and project data and an IP65 / NEMA 4 protection rating. It is classified as obsolete, making the NS5-MQ11-V2 relevant for maintenance, repair and like-for-like replacement of existing NS5 monochrome HMI panels. During replacement, check the 24 V DC supply, Ethernet connection, Memory Card or PC project-transfer method, and the CX-Designer project before returning the machine to service. Ladder monitor support is not available on this model.
Technical Specifications
| Manufacturer | Omron |
| Part number | NS5-MQ11-V2 |
| Model/type | Interactive Display |
| Component type | Human-machine interface (HMI) |
| Product family | NS Series |
| Display size | 5.7 in |
| Display type | STN monochrome LCD |
| Display resolution | 320 × 240 pixels |
| Display shades | 16 gradations |
| Internal data capacity | 20 MB |
| Supply voltage | 24 V DC |
| Ethernet interface | 10/100Base-T Ethernet with RJ45 connector |
| Communication protocol | Ethernet |
| Memory Card interface | Built-in Memory Card slot for project transfer and system expansion |
| Project transfer | Memory Card or PC transfer using CX-Designer |
| Protection rating | IP65 / NEMA 4 |
| Ladder monitor support | Not supported |
| Lifecycle status | Obsolete |
Programming and Configuration
Screen development, configuration and PC-based project transfer for the NS5-MQ11-V2 are performed with Omron CX-Designer. The terminal belongs to the Omron NS5-V2 project environment and provides 20 MB of internal capacity for screen and system data.
Projects can be transferred through the built-in Memory Card slot or from a PC using CX-Designer. The Memory Card workflow supports project transfer, backup and restoration. When preparing a spare, use the applicable NS5-V2 project and confirm that its 320 × 240 pixel, 16-gradation monochrome screen layout matches the existing HMI application.
Communication and System Integration
The NS5-MQ11-V2 provides a built-in 10/100Base-T Ethernet interface with an RJ45 connector. Ethernet is used for PLC communication and programming, allowing the operator terminal to connect to an existing PLC or automation network.
The built-in Memory Card slot provides an additional method for transferring HMI projects and supporting backup, restoration and system expansion. For a replacement installation, check the Ethernet connection and transfer the correct CX-Designer project before commissioning the terminal.
Replacement and Spare Part Considerations
The Omron NS5-MQ11-V2 is an obsolete NS Series HMI intended for maintenance, repair and like-for-like replacement of existing monochrome installations. Match the exact NS5-MQ11-V2 part number and confirm the 5.7-inch display, 320 × 240 resolution, 16-gradation monochrome format, Ethernet interface and 24 V DC supply before installing a spare.
A replacement terminal requires the applicable HMI project to be transferred by Memory Card or PC using CX-Designer. Confirm the project environment and screen format before commissioning, and check the Ethernet connection after installation. Replacing the unit with a color NS5-SQ model may require project recompilation and verification in CX-Designer.
Frequently Asked Questions
What is the Omron NS5-MQ11-V2?
It is a 5.7-inch monochrome STN touchscreen HMI from the Omron NS Series, with a 320 × 240 pixel resolution, 16 display gradations and 20 MB of internal screen and project data capacity.
Which software is used to program the NS5-MQ11-V2?
Omron CX-Designer is used for screen development, configuration and PC-based project transfer in the NS5-V2 project environment.
How can an HMI project be transferred to a replacement NS5-MQ11-V2?
The project can be transferred from a PC using CX-Designer or through the built-in Memory Card slot. The Memory Card also supports project backup and restoration.
What communication interface does the NS5-MQ11-V2 provide?
The terminal provides built-in 10/100Base-T Ethernet with an RJ45 connector for PLC communication and programming.
Does the NS5-MQ11-V2 support the ladder monitor function?
No. Ladder monitor support is not available on this model.
What should be checked before commissioning a replacement terminal?
Check the exact part number, 24 V DC supply, Ethernet connection, CX-Designer project environment, project transfer method and compatibility with the 320 × 240 pixel, 16-gradation monochrome screen layout.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Omron.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



