ESA VT555WA0000 VT555W 5.5-Inch HMI Operator Panel

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: VT Series | Series: VT555W

The ESA VT555WA0000 is a VT555W series HMI operator panel for PLC, drive and machine-control installations. Its compact 5.5-inch touchscreen provides a 240 x 128 pixel graphic display, a 20 x 8 touchscreen matrix and a 123 x 68 mm display area. Operators can monitor process values, edit machine parameters, respond to alarms and manage recipe data through the panel. The 24 V DC unit has an IP65-rated front panel for installation in enclosed industrial control panels.

The VT555WA0000 provides built-in RS-232 serial communication through an 8-pin connector and an integrated CAN interface. The VT555W series supports Modbus in master and slave modes. CAN termination is configured internally with jumper J2: pins 1-2 provide the unterminated setting, while pins 2-3 enable a 120 ohm termination resistor with power disconnected. PROFIBUS-DP, INTERBUS-S and TCP/IP Ethernet apply to compatible VT555W variants or interface options and should be matched to the installed hardware. When preparing a replacement, confirm the exact part number, communication configuration, mechanical fit and HMI project requirements before commissioning.

For operation and adjustment, selecting an editable variable field opens the parameter-editing interface, with touchscreen field calibration available. The panel is intended for monitoring PLC and drive values, adjusting parameters, visualizing alarms and managing recipes in existing automation equipment. As a discontinued ESA product, the VT555WA0000 is relevant to legacy HMI replacement and spare-part requirements where the installed VT555W configuration must be retained.

Technical Specifications

ManufacturerESA
Part numberVT555WA0000
Model/typeVT555W
Component typeHMI operator panel
Product familyVT Series
Supply voltage24 V DC
Display size5.5 in
Display resolution240 x 128 pixels
Touchscreen matrix20 x 8
Display area123 x 68 mm
Front-panel protectionIP65
Text memory192 KB
Graphics memory384 KB
Alarm memory128 KB
Recipe memory8 KB RAM
RS-232 interfaceBuilt-in, 8-pin connector
CAN interfaceBuilt-in; 120 ohm termination configurable by internal J2 jumper
Modbus supportMaster and slave modes
Optional series communicationPROFIBUS-DP, INTERBUS-S and TCP/IP Ethernet on compatible variants or interface options
Product lifecycleDiscontinued; primarily available as surplus or replacement stock

Communication and System Integration

The ESA VT555WA0000 combines built-in RS-232 serial communication through an 8-pin connector with an integrated CAN interface. The VT555W series supports Modbus master and slave operation for PLC and drive interfacing. CAN line termination is set internally with jumper J2: pins 1-2 provide the unterminated setting, while pins 2-3 enable a 120 ohm termination resistor with power disconnected.

PROFIBUS-DP, INTERBUS-S and TCP/IP Ethernet are available on compatible VT555W variants or through interface options. These interfaces must therefore match the hardware installed in the existing machine. For a replacement HMI, check the exact VT555W configuration, the connection method and the communication requirements of the PLC or drive system before commissioning.

Diagnostics and Status Indication

Touchscreen field calibration and parameter editing are available from the operator interface. Selecting an editable variable field opens the parameter-editing interface, allowing machine parameters to be adjusted through the touchscreen. During troubleshooting, verify the installed HMI configuration, the RS-232 or CAN connection and the applicable communication setup before commissioning a replacement.

Replacement and Spare Part Considerations

The ESA VT555WA0000 is a discontinued VT555W HMI operator panel intended for maintaining existing installations. Replacement checks should include the exact part number, the VT555W variant, the fitted communication interfaces, the panel fit and the HMI project requirements. RS-232, CAN and Modbus support are relevant to the standard interface configuration, while PROFIBUS-DP, INTERBUS-S and TCP/IP Ethernet depend on compatible variants or interface options.

Before commissioning a spare, compare the replacement with the failed unit and confirm that the machine's communication configuration and operator-interface requirements match. The 24 V DC supply, CAN termination setting at jumper J2 and connection method should be checked as part of the installation. The panel's 192 KB text memory, 384 KB graphics memory, 128 KB alarm memory and 8 KB RAM recipe memory support the existing HMI content when the replacement configuration is suitable.

Frequently Asked Questions

What is the ESA VT555WA0000?

The ESA VT555WA0000 is a VT555W series 5.5-inch HMI operator panel with a 240 x 128 pixel touchscreen display for PLC, drive and machine-control installations.

Which communication interfaces does the VT555WA0000 have?

It has built-in RS-232 serial communication through an 8-pin connector and an integrated CAN interface. The VT555W series supports Modbus master and slave operation.

How is CAN termination configured on the VT555W?

CAN termination is configured internally with jumper J2. Pins 1-2 provide the unterminated setting, while pins 2-3 enable a 120 ohm termination resistor with power disconnected.

Does the VT555WA0000 support PROFIBUS-DP, INTERBUS-S or Ethernet?

These interfaces apply to compatible VT555W variants or interface options. The fitted hardware must be matched to the existing machine before selecting a replacement.

How are parameters edited on the VT555W HMI?

Selecting an editable variable field opens the parameter-editing interface on the touchscreen. Touchscreen field calibration is also available.

What should be checked before installing a replacement VT555WA0000?

Confirm the exact part number and VT555W variant, the 24 V DC supply, communication interfaces, mechanical fit, CAN termination setting and HMI project requirements.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of ESA.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.