ESA Automation EW107ND4SP000FR EW100 – 7-Inch Industrial HMI Panel

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: Esaware | Series: EW100

The ESA Automation EW107ND4SP000FR is an EW100 industrial HMI operator panel from the Esaware product family. It provides a compact widescreen 7-inch touch interface for machine operator control, production-line monitoring and process visualisation. The panel uses an ARM Cortex-A8 processor with DDR3 memory and 3 GB of internal data memory. Its flat front with aluminum coating has an IP66 rating for protection against dust and water exposure when correctly installed.

A replacement EW107ND4SP000FR uses the Everyware runtime environment for HMI operation, on-screen diagnostics and remote-access capability. Project storage, backup and restore can use the internal Flash and the built-in SDHC v2.0 card slot, which supports non-volatile storage and transfer speeds of up to 25 MB/s. Before commissioning a spare, transfer or restore the required HMI project and confirm that the Everyware runtime environment and stored project are aligned with the machine installation.

The EW100 provides front-panel status indication for operating status and system conditions. Everyware Runtime Diagnostics and on-screen diagnostics support service work on the HMI and connected machine interface. For a replacement or repair decision, first confirm the ESA Automation part number, EW100 model, touch-panel format, IP66 front and Everyware project-storage arrangement. A tested exchange unit or repair can be relevant when the installed HMI cannot be returned to service through project restore and commissioning.

Technical Specifications

ManufacturerESA Automation
Part numberEW107ND4SP000FR
Model/typeEW100
Product familyEsaware
Component typeIndustrial HMI operator panel
Display size7 in
ProcessorARM Cortex-A8
Memory typeDDR3
Internal data memory3 GB
Front protection ratingIP66
Front constructionFlat-front touch display with aluminum coating
Expansion card interfaceSDHC v2.0
SDHC transfer speed25 MB/s
Software environmentEveryware runtime environment

Programming and Configuration

The EW107ND4SP000FR operates with the Everyware runtime environment. HMI projects can be stored and transferred using the internal Flash and the integrated SDHC v2.0 card slot, which supports non-volatile storage, project backup and restore.

When commissioning a spare, restore the machine's HMI project and confirm that the Everyware runtime environment matches the project requirements. The SDHC interface supports transfer speeds of up to 25 MB/s and SDHC v2.0 memory cards.

Diagnostics and Status Indication

The EW100 includes front-panel status LEDs for operating-status and system-condition indication. The Everyware runtime environment also provides Everyware Runtime Diagnostics and on-screen diagnostics for service access through the HMI.

During troubleshooting, use the front-panel status indication and the on-screen Everyware diagnostics while checking the HMI project, runtime environment and SDHC-based backup or restore process. These checks help distinguish configuration and project-transfer issues from a hardware fault requiring repair or exchange.

Status LED Indicators

LEDColor/StatusMeaning
Status LEDsFront-panel operating status and system-condition indication

Replacement and Spare Part Considerations

Verify the complete replacement identity before installation: ESA Automation, part number EW107ND4SP000FR, model EW100 and Esaware product family. Also compare the 7-inch widescreen touch format, IP66-rated front, Everyware runtime environment and SDHC v2.0 storage arrangement with the installed unit.

A spare is not limited to the hardware swap. The HMI project may need to be restored from internal Flash or SDHC storage, and the Everyware runtime environment must support the project used by the machine. After transfer, complete the commissioning checks and use the front-panel status indication and Everyware Runtime Diagnostics to confirm operation.

Frequently Asked Questions

What is the ESA Automation EW107ND4SP000FR?

It is an EW100 industrial HMI operator panel from the Esaware product family, with a 7-inch widescreen touch interface for machine control, monitoring and visualisation.

Which runtime environment does the EW107ND4SP000FR use?

The EW107ND4SP000FR uses the Everyware runtime environment, including Everyware Runtime Diagnostics and on-screen diagnostic access.

Can the HMI project be backed up or restored?

Yes. Project storage, backup and restore can use the internal Flash and the integrated SDHC v2.0 card slot.

What should be checked before fitting a replacement EW107ND4SP000FR?

Check the ESA Automation part number, EW100 model, Esaware family, 7-inch touch format, IP66-rated front, Everyware runtime environment and project-storage arrangement.

How does the EW100 provide diagnostic information?

Front-panel status LEDs indicate operating status and system condition. Everyware Runtime Diagnostics and on-screen diagnostics provide additional service information.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of ESA.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.