ESA VT300WA0000 VT300W HMI Operator Terminal

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The ESA VT300WA0000 is a VT300W HMI operator terminal from the VT Series for displaying and managing machine information. Its monochrome STN graphic LCD provides a 240 × 64 pixel display for process values, operating states, alarm messages, diagnostic information, recipes and parameter sets. The terminal operates from 18–32 V DC and combines a compact operator interface with 512 KB of project memory and 128 KB of non-volatile recipe memory in internal Flash.
A replacement VT300W must match the WA0000 configuration, including the MSP RS-232 main serial interface, ASP auxiliary interface and integrated CAN interface. Project programming, screen configuration, upload, download, backup and restoration are handled with ESA VT-Win or Polymath software. Project transfer uses a compatible serial programming cable such as ESA-CAB-SERIAL or a compatible null-modem cable. Before commissioning, transfer the correct ESA VT Series project, confirm the serial or point-to-point PLC driver, and check the CAN termination setting: internal jumper J2 provides selectable 120 ohm termination.
The VT300W presents process status, alarms, operating states and system diagnostic events through on-screen messages. Manual display contrast adjustment is available using rear-panel trimmer C. For troubleshooting a replacement terminal, check the installed project and PLC driver, MSP serial settings, CAN wiring and the J2 termination position before restoring operation. The default serial settings are 38400 baud, 8 data bits, no parity and 1 stop bit; the MSP interface supports communication speeds from 9600 to 115200 bps. Its discontinued status makes exact hardware and configuration matching important for legacy machine repair and refurbishment.
Technical Specifications
| Manufacturer | ESA |
| Part number | VT300WA0000 |
| Model/type | VT300W |
| Component type | HMI operator terminal |
| Product family | VT Series |
| Supply voltage range | 18–32 V DC |
| Display type | Monochrome STN graphic LCD |
| Display resolution | 240 × 64 pixels |
| Project memory | 512 KB |
| Recipe memory | 128 KB |
| Memory storage | Non-volatile internal Flash memory |
| Main serial port | MSP serial interface, RS-232, DB-9 female |
| MSP communication speed | 9600–115200 bps |
| Default serial settings | 38400 baud, 8 data bits, no parity, 1 stop bit |
| Auxiliary serial port | ASP interface with serial or parallel printing support |
| Fieldbus interface | Integrated CAN |
| CAN termination | Selectable 120 ohm termination via internal jumper J2 |
| Protocol support | CAN and serial/point-to-point PLC drivers |
| Lifecycle status | Discontinued |
Programming and Configuration
ESA VT-Win or Polymath software is used for VT300W project programming, screen configuration, project upload and download, backup, restoration and recipe management. The terminal provides 512 KB of project memory and 128 KB of non-volatile recipe memory in internal Flash, allowing project and recipe data to remain available after power loss.
Project transfer requires ESA-CAB-SERIAL or a compatible null-modem serial programming cable connected through the appropriate serial interface. When commissioning a spare, restore the correct ESA VT Series project and confirm that the configured serial or point-to-point PLC driver matches the machine installation.
The MSP serial interface uses RS-232 through a DB-9 female connector and supports 9600–115200 bps. Its default settings are 38400 baud, 8 data bits, no parity and 1 stop bit. Configuration transfer and backup restoration should be completed before returning the terminal to machine operation.
Communication and System Integration
The VT300WA0000 combines an MSP main serial interface, an ASP auxiliary serial interface and an integrated CAN interface. MSP uses RS-232 through a DB-9 female connector and supports communication speeds from 9600 to 115200 bps for PLC communication and project transfer.
The ASP interface supports serial or parallel printing. The integrated CAN interface provides fieldbus connectivity, while the terminal supports CAN and serial or point-to-point PLC drivers. Two protocol drivers can operate simultaneously depending on the configured application.
CAN line termination is selectable through internal jumper J2, with a 120 ohm termination option. When replacing a terminal, match the existing CAN arrangement, serial interface use, PLC driver and J2 jumper position before commissioning the spare.
Diagnostics and Status Indication
The VT300W displays alarm and information messages for process status, operating states and system diagnostic events on its monochrome 240 × 64 pixel graphic LCD. These on-screen messages support operator-level status monitoring without relying on a separate status indicator.
For service work, display contrast can be adjusted manually with rear-panel trimmer C. Project upload, download, backup and restoration through ESA VT-Win or Polymath can be used to check the installed application and restore the correct operating configuration.
Replacement and Spare Part Considerations
For a compatible replacement, match ESA part number VT300WA0000 and model VT300W with the existing VT Series installation. Confirm the 240 × 64 monochrome display, 512 KB project memory, 128 KB recipe memory, MSP RS-232 interface, ASP interface and integrated CAN interface. The WA0000 configuration is important when the machine uses the MSP, ASP and CAN combination.
A spare terminal normally requires project transfer and commissioning before it can operate in the machine. Restore the correct project and recipe data with ESA VT-Win or Polymath, use ESA-CAB-SERIAL or a compatible null-modem cable, and check the PLC driver, serial settings, CAN wiring and internal J2 termination. ABC Industrial Parts can support preparation of a replacement or exchange unit for legacy VT300W repair work.
Frequently Asked Questions
What is the ESA VT300WA0000?
The ESA VT300WA0000 is a VT300W HMI operator terminal from the VT Series. It has a monochrome STN graphic LCD with 240 × 64 pixel resolution, 512 KB of project memory, 128 KB of recipe memory, MSP RS-232, ASP and integrated CAN interfaces.
Which software is used to program the VT300W?
ESA VT-Win or Polymath is used for project programming, screen configuration, project upload and download, backup, restoration and recipe management.
How is a VT300W project transferred to a replacement terminal?
Project transfer uses ESA-CAB-SERIAL or a compatible null-modem serial programming cable. The replacement must receive the correct ESA VT Series project, and the PLC driver and serial settings must match the machine installation.
Which communication interfaces are fitted to the VT300WA0000?
The terminal has an MSP RS-232 main serial interface with a DB-9 female connector, an ASP auxiliary interface supporting serial or parallel printing, and an integrated CAN interface.
What should be checked when commissioning this HMI replacement?
Check the VT300WA0000 part number and WA0000 configuration, restore the correct project and recipe data, confirm the PLC driver and MSP serial settings, inspect CAN wiring, and verify the internal J2 CAN termination position.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of ESA.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



