Siemens 6SN1123-1AA00-0EA2 SIMODRIVE 611 LT Module

New 
On request
Refurbished   
9 available for direct collection
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMODRIVE | Series: SIMODRIVE 611

The Siemens 6SN1123-1AA00-0EA2 is a SIMODRIVE 611 single-axis LT power module for feed and main spindle motor drives in CNC machine tools. As a servo drive power module, it connects to the SIMODRIVE 611 intermediate DC link and operates with a separate plug-in control module. The unit is designed for a 600 V DC link, has a 50 A rated current, and uses internal air cooling with an integrated fan for cabinet installations.

A replacement requires a matching SIMODRIVE 611 system configuration, including the intermediate DC link, the plug-in control module and the cabinet cooling arrangement. The removable control module stores drive parameters in non-volatile memory, allowing configuration retention and transfer when a suitable LT power module is replaced. Depending on the installed control module, PROFIBUS DP communication is available, while SimoCom U and STARTER support parameterization and commissioning.

The installed SIMODRIVE 611 control module provides front-panel status LEDs for the module operating state, DC link readiness and fault indication. Diagnostic information can also be read from the software diagnostic buffer through SimoCom U or STARTER using the applicable communication interface. For a replacement or repair, confirm the single-axis configuration, 600 V DC link, current ratings, internal cooling, control-module compatibility and cabinet requirements before installation.

Technical Specifications

ManufacturerSiemens
Part number6SN1123-1AA00-0EA2
Model/typeSIMODRIVE 611 1-Axis LT Power Module
Component typeServo drive power module
Product familySIMODRIVE
Number of axes1 axis
DC link voltage600 V DC
Rated current50 A
Rated current for feed motor56 A
Rated current for main spindle motor60 A
Peak output current105 A
Cooling typeInternal air cooling with integrated fan
DC link interfaceBusbar connection to the intermediate DC link circuit
Control unit interfaceInternal plug-in card slot for a SIMODRIVE 611 control module
Supported fieldbusPROFIBUS DP via optional SIMODRIVE 611 control module
Parameter storageNon-volatile memory on removable control module
Product lifecycle statusDiscontinued

Programming and Configuration

SimoCom U and STARTER software support parameterization, commissioning and diagnostics for the SIMODRIVE 611 drive system. The applicable communication interface is provided through the installed SIMODRIVE 611 control module.

Drive parameters are stored in non-volatile memory on the removable control module. During a suitable power-module replacement, retaining or transferring the existing control module can preserve the drive configuration, subject to compatibility between the control module, motor application and replacement LT module.

Communication and System Integration

The 6SN1123-1AA00-0EA2 connects to the SIMODRIVE 611 intermediate DC link through a busbar connection. An internal plug-in card slot accepts a SIMODRIVE 611 control module, which provides the control architecture for the power section.

PROFIBUS DP communication is available through an optional compatible SIMODRIVE 611 control module. This allows integration with a CNC or host controller when the selected control-module configuration supports the fieldbus connection.

Diagnostics and Status Indication

The installed SIMODRIVE 611 control module uses front-panel status LEDs to display the module operating state, DC link readiness and fault indication. SimoCom U or STARTER can provide further diagnostic information through the applicable communication interface, including readout of the software diagnostic buffer.

Status LED Indicators

LEDColor/StatusMeaning
Front Panel Status LEDsDisplays the module operating state, DC link readiness, and fault indication through the installed control card front panel.

Replacement and Spare Part Considerations

For a like-for-like replacement, match the Siemens part number 6SN1123-1AA00-0EA2, the single-axis configuration, the 600 V DC link, the current ratings and the internal air-cooling arrangement. The replacement must also suit the existing SIMODRIVE 611 intermediate DC link, cabinet and installed control module.

The removable control module stores the drive parameters in non-volatile memory, so a suitable replacement can retain the existing configuration when the control module is transferred. Confirm the control-module compatibility and the motor application before commissioning, particularly for Siemens 1FT6 feed motors or 1PH main spindle motors.

This discontinued SIMODRIVE 611 module remains relevant for maintaining existing Siemens CNC installations and legacy servo systems. SimoCom U or STARTER can be used for commissioning and diagnostics after installation, while the control-module indicators and diagnostic buffer support troubleshooting.

Frequently Asked Questions

What is the Siemens 6SN1123-1AA00-0EA2 used for?

It is a single-axis SIMODRIVE 611 LT servo drive power module for Siemens feed and main spindle motor applications in CNC machine tools and existing SIMODRIVE 611 systems.

What must match when replacing this SIMODRIVE 611 LT module?

Check the part number, single-axis configuration, 600 V DC link, current ratings, internal air cooling, intermediate DC link, cabinet requirements and compatibility with the installed SIMODRIVE 611 control module.

Can the existing drive configuration be retained during replacement?

Drive parameters are stored in non-volatile memory on the removable control module. Transferring a compatible existing control module to the replacement LT power module can retain the drive configuration.

Which software is used to commission and diagnose the module?

SimoCom U and STARTER support parameterization, commissioning and diagnostics. Diagnostic information can be read from the software diagnostic buffer through the applicable communication interface.

Does this module support PROFIBUS DP?

PROFIBUS DP is available through an optional compatible SIMODRIVE 611 control module, depending on the installed control-module configuration.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.