Yaskawa SGDH-30DE-OY Sigma-II 3 kW Servopack Servo Amplifier

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Yaskawa SGDH-30DE-OY is a Sigma-II Servopack servo amplifier for 3 kW AC servo motor applications. It operates from a 400 V AC three-phase supply and uses all-digital IGBT PWM control with sine-wave drive technology for precise motion control. The unit supports 13-bit serial incremental encoder and 16-bit serial absolute encoder feedback, with CN1 control I/O providing seven digital inputs, three digital outputs and two analog inputs.
For replacement commissioning, the SGDH-30DE-OY uses CN2 for serial encoder feedback and CN3 for RS-232, RS-422, PC communication and handheld digital operator connections. Parameters are stored in internal non-volatile EEPROM with one main Pn parameter set and can be backed up or transferred using SigmaWin+ or a compatible digital operator such as the JUSP-OP02A-2 or R88A-PR02W. Before installation, confirm the 3 kW motor application, 400 V voltage class, encoder type, control wiring and any required communication option.
The front-panel 5-Digit 7-Segment LED Display shows operating states such as bb for baseblock or disarmed and run for operating, as well as alarm and fault codes such as A.xx. SigmaWin+ provides alarm trace and history monitoring, while the JUSP-OP02A-2 digital operator supports parameter editing, status monitoring, diagnostics and jog operation. This discontinued SGDH-series unit is relevant for Sigma-II replacement inventory and repair planning; the recommended successor family is Yaskawa Sigma-7, including the SGD7S-200D, but a direct replacement requires application and configuration verification.
Technical Specifications
| Manufacturer | Yaskawa |
| Part number | SGDH-30DE-OY |
| Model/type | Servopack Servo Amplifier |
| Component type | AC Servo Drive |
| Product family | Sigma-II |
| Rated power | 3 kW |
| Supply voltage | 400 V AC |
| Supply phases | 3 phase |
| Output current | 8.9 A |
| Control method | All-digital IGBT PWM control with sine-wave drive |
| Encoder feedback support | 13-bit serial incremental encoder and 16-bit serial absolute encoder |
| Digital inputs | 7 inputs |
| Digital outputs | 3 outputs |
| Analog inputs | 2 inputs |
| Control I/O interface | CN1; analog command input and digital input/output control |
| Encoder feedback interface | CN2 serial encoder feedback interface |
| Serial service interface | CN3; RS-232, RS-422, and handheld digital operator connection |
| Optional motion fieldbus | MECHATROLINK-II via optional interface card such as JUSP-NS115 |
| Optional fieldbus | DeviceNet via optional plug-in module |
| Optional fieldbus | PROFIBUS-DP via optional plug-in module |
| Parameter storage | Internal non-volatile EEPROM with one main Pn parameter set |
| Lifecycle status | Discontinued |
| Recommended successor | Yaskawa Sigma-7 SGD7S-200D |
Programming and Configuration
SigmaWin+ supports parameter configuration, data logging, oscilloscope tracking, commissioning and alarm-history review for the SGDH-30DE-OY. The CN3 serial interface provides RS-232, RS-422, PC communication and connection to a handheld digital operator.
The JUSP-OP02A-2 or R88A-PR02W digital operator can be used for parameter editing, status monitoring, diagnostics and jog operation. Parameters are held in internal non-volatile EEPROM with one main Pn parameter set, allowing parameter backup and transfer with the digital operator or SigmaWin+ using the appropriate PC connection cable.
Communication and System Integration
CN1 provides the machine-level control interface, including an analog command input, seven digital inputs, three digital outputs and two analog inputs. CN2 connects the serial encoder feedback system and supports 13-bit serial incremental and 16-bit serial absolute encoders.
CN3 supports RS-232 and RS-422 communication, PC connection and handheld digital operator connection. Networked motion integration is available through optional communication hardware, including MECHATROLINK-II via an interface card such as JUSP-NS115, DeviceNet via an optional plug-in module, or PROFIBUS-DP via an optional plug-in module.
Diagnostics and Status Indication
The front-panel 5-Digit 7-Segment LED Display indicates operational states and alarms. Displayed states include bb for baseblock or disarmed and run for operating, while alarm and fault conditions are shown using codes such as A.xx.
Troubleshooting functions include front-panel display-code inspection, SigmaWin+ alarm trace and history monitoring, analog output signal monitoring through CN1 analog monitor signals, and diagnostic operation through the JUSP-OP02A-2 digital operator.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| 5-Digit 7-Segment LED Display | Displays operational states such as bb for baseblock or disarmed and run for operating, as well as alarm and fault codes such as A.xx. |
Replacement and Spare Part Considerations
When preparing an SGDH-30DE-OY replacement, match the 3 kW rating, 400 V AC three-phase supply, encoder feedback type, CN1 control wiring and required CN3 connection. Confirm whether the machine uses an optional MECHATROLINK-II, DeviceNet or PROFIBUS-DP interface module, because network integration depends on the correct option hardware and system configuration.
A spare unit may require parameter transfer before commissioning. Use the existing parameter backup, SigmaWin+ or a compatible digital operator to restore the Pn parameter set, then check the motor, encoder, control I/O and communication configuration. The recommended successor is Yaskawa Sigma-7 SGD7S-200D, but it is not a direct replacement without application and configuration verification.
Frequently Asked Questions
What is the Yaskawa SGDH-30DE-OY?
The SGDH-30DE-OY is a Yaskawa Sigma-II Servopack AC servo drive rated for 3 kW applications on a 400 V AC three-phase supply.
Which encoder types does the SGDH-30DE-OY support?
The drive supports 13-bit serial incremental encoder and 16-bit serial absolute encoder feedback through the CN2 serial encoder interface.
Which interfaces are available for machine integration?
CN1 provides seven digital inputs, three digital outputs and two analog inputs. CN2 is used for serial encoder feedback, while CN3 supports RS-232, RS-422, PC communication and handheld digital operator connections. Optional modules support MECHATROLINK-II, DeviceNet and PROFIBUS-DP.
How can parameters be transferred to a replacement drive?
Parameters can be backed up and transferred using SigmaWin+ with the appropriate PC connection cable or through the JUSP-OP02A-2 or R88A-PR02W digital operator.
How are operating states and alarms displayed?
The front-panel 5-Digit 7-Segment LED Display shows states such as bb for baseblock or disarmed and run for operating, together with alarm and fault codes such as A.xx. SigmaWin+ also provides alarm trace and history monitoring.
Is the Yaskawa SGDH-30DE-OY discontinued?
Yes. The SGDH-30DE-OY is discontinued and is relevant for replacement inventory, repair and maintenance of existing Sigma-II installations. The recommended successor is Yaskawa Sigma-7 SGD7S-200D, subject to application and configuration verification.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Yaskawa.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



