Siemens 6SL3120-2TE13-0AA4 SINAMICS S120 Double Motor Module

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SL3120-2TE13-0AA4 is a SINAMICS S120 Double Motor Module for controlling up to two servo motor axes in a modular multi-axis drive system. Its compact Booksize format integrates two motor channels into a SINAMICS S120 drive line-up. The module uses a nominal 600 V DC link input and provides 400 V AC output with a rated output current of 3 A per channel. Internal air cooling supports installation in appropriately designed control cabinets.
Communication with the SINAMICS S120 Control Unit takes place through the integrated DRIVE-CLIQ interface. DRIVE-CLIQ supports topology detection and automatic module identification, while the electronic rating plate supports replacement transfer procedures. A DRIVE-CLIQ connection cable is included. A replacement module still requires compatibility checks against the installed Control Unit, firmware version, DC link arrangement and motor configuration, followed by commissioning with Siemens STARTER, SINAMICS Startdrive in TIA Portal or a BOP20 Basic Operator Panel.
For troubleshooting, the RDY indicator shows the ready and operating state; red indicates an internal hardware fault or drive failure requiring repair or replacement of the module. The DC LINK indicator shows the presence of DC link voltage. Diagnostic work can be performed with STARTER, SINAMICS Startdrive, BOP20 or the diagnostic parameter buffer in the Control Unit, including the r0945 fault-code memory. For a failed module in an existing SINAMICS S120 installation, a tested repair or exchange unit can be more practical than redesigning the complete drive system.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6SL3120-2TE13-0AA4 |
| Model/type | SINAMICS S120 Double Motor Module |
| Component type | Double servo motor module |
| Product family | SINAMICS S120 |
| DC link input voltage | 600 V DC |
| Output voltage | 400 V AC |
| Rated output current per channel | 3 A |
| Output channels | 2 |
| Motor axis capacity | Up to 2 axes |
| Frame size | Booksize |
| Cooling method | Internal air cooling |
| Internal communication interface | DRIVE-CLIQ |
| Power interface | DC Link |
| Pulse sampling | Optimized pulse sampling support |
| Safety functions | Supports Extended Safety Integrated Functions |
| Lifecycle status | Discontinued; cancellation effective 2018-10-01 |
Programming and Configuration
Commissioning and diagnostics can be carried out with Siemens STARTER, SINAMICS Startdrive integrated with TIA Portal, or the BOP20 Basic Operator Panel. The SINAMICS S120 Control Unit communicates with the module through DRIVE-CLIQ and can identify the module automatically through topology detection.
For a spare-module installation, transfer and commissioning work must account for the electronic rating plate, the installed Control Unit, firmware version, DC link arrangement and motor configuration. The replacement is therefore part of the wider SINAMICS S120 configuration rather than an isolated plug-in component.
Communication and System Integration
The 6SL3120-2TE13-0AA4 integrates into SINAMICS S120 Booksize DC link systems and communicates with the central Control Unit through DRIVE-CLIQ. The interface supports topology detection and automatic identification of the motor module within the drive system.
The power connection uses the DC Link, while two motor channels provide 400 V AC output with 3 A rated output current per channel. A DRIVE-CLIQ connection cable is included for connection within the SINAMICS S120 architecture.
Diagnostics and Status Indication
The RDY indicator provides the ready and operating status of the module. Red indicates an internal hardware fault or drive failure that requires repair or replacement. The DC LINK indicator shows whether DC link voltage is present.
Further diagnostic access is available through Siemens STARTER, SINAMICS Startdrive, the BOP20 Basic Operator Panel and the diagnostic parameter buffer in the Control Unit, including the r0945 fault-code memory.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| RDY | Ready and operating status indicator. Red indicates an internal hardware fault or drive failure requiring unit repair or replacement. | |
| DC LINK | Indicates the presence of DC link voltage. |
Replacement and Spare Part Considerations
Use the exact part number 6SL3120-2TE13-0AA4 when matching a replacement for an existing SINAMICS S120 installation. Before installation, compare the installed Control Unit, firmware version, DC link arrangement and motor configuration. The Booksize format, 600 V DC link input, two 3 A motor channels and DRIVE-CLIQ connection are key identification points.
The module is discontinued, with cancellation effective 2018-10-01. Siemens identifies the SINAMICS S120 Double Motor Module D-type, part number 6SL3120-2TE13-0AD0, for successor evaluation. Hardware revision and firmware compatibility can affect interchangeability, so the successor must be assessed against the installed drive system before fitting.
A replacement requires commissioning through STARTER, SINAMICS Startdrive in TIA Portal or BOP20 and may require transfer work using the electronic rating plate and existing system configuration. ABC Industrial Parts can support repair or exchange preparation for failed SINAMICS S120 motor modules.
Frequently Asked Questions
What is the Siemens 6SL3120-2TE13-0AA4?
It is a SINAMICS S120 Double Motor Module in Booksize format for controlling up to two servo motor axes. It accepts a 600 V DC link input and provides two 400 V AC motor outputs rated at 3 A per channel.
Which interface does this SINAMICS S120 motor module use?
The module uses DRIVE-CLIQ for communication with the SINAMICS S120 Control Unit. DRIVE-CLIQ also supports topology detection and automatic module identification, and a DRIVE-CLIQ connection cable is included.
Which software can be used to commission the 6SL3120-2TE13-0AA4?
Commissioning and diagnostics can be performed with Siemens STARTER, SINAMICS Startdrive integrated with TIA Portal or a BOP20 Basic Operator Panel.
What should be checked before installing a replacement module?
Check the part number, installed Control Unit, firmware version, DC link arrangement and motor configuration. The electronic rating plate and DRIVE-CLIQ topology detection support the replacement process, but commissioning is still required.
What do the RDY and DC LINK indicators show?
RDY indicates the ready and operating state; red indicates an internal hardware fault or drive failure requiring repair or replacement. DC LINK indicates the presence of DC link voltage.
Is the 6SL3120-2TE13-0AA4 discontinued?
Yes. The module is discontinued, with cancellation effective 2018-10-01. Siemens identifies 6SL3120-2TE13-0AD0 as the SINAMICS S120 Double Motor Module D-type successor for replacement evaluation.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



