Lenze 13190889 EVS9325-ES 5.5 kW AC Servo Drive
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze EVS9325-ES, part number 13190889, is a 5.5 kW AC servo drive and servo inverter from the Lenze 9300 Servo product family. It combines a servo power section with integrated position-controller functionality for motion-control systems in existing automated machinery. The drive accepts a 320-528 V AC three-phase supply at 45-65 Hz or a 460-740 V DC bus supply and has an IP20 protection rating.
For replacement commissioning, the EVS9325-ES provides an integrated CAN system bus with CANopen communication. PROFIBUS-DP and INTERBUS can be added through optional plug-in communication modules. Parameters can be transferred with Lenze Global Drive Control software or the EMZ9371BC Keypad XT operating module, which supports parameterization, status display and diagnostics. Before installing a spare, match the 5.5 kW drive rating, supply requirements, communication hardware and existing machine configuration, then transfer the established parameters with GDC or Keypad XT.
The DRIVE READY / FAULT LED uses green or red indication: green indicates normal operation or drive ready, while red indicates an active trip or fault. The fault history buffer can be reviewed through the keypad parameter list, and the Global Drive Control diagnostic window provides an additional diagnostic method. As a legacy or discontinued Lenze 9300 Servo drive, the EVS9325-ES is relevant for repair, tested exchange and spare-part replacement of established motion-control systems.
Technical Specifications
| Manufacturer | Lenze |
| Part number | 13190889 |
| Model/type | EVS9325-ES |
| Product family | 9300 Servo |
| Component type | AC servo drive / servo inverter |
| Rated motor power | 5.5 kW |
| Supply voltage | 320-528 V AC, 3-phase |
| Supply frequency | 45-65 Hz |
| DC bus voltage | 460-740 V DC |
| Continuous output current at 8 kHz | 13 A |
| Continuous output current at 16 kHz | 9.7 A |
| Maximum output current at 8 kHz | 19.5 A |
| Apparent output power at 400 V | 9 kVA |
| Apparent output power at 480 V | 10.8 kVA |
| Integrated system bus | CAN system bus |
| Integrated fieldbus protocol | CANopen |
| Optional fieldbus protocols | PROFIBUS-DP and INTERBUS via plug-in communication module |
| Protection rating | IP20 |
Programming and Configuration
Lenze Global Drive Control software can be used for configuration, commissioning, parameter transfer and diagnostics of the EVS9325-ES. The EMZ9371BC Keypad XT operating module provides another method for parameterization, status display and diagnostics.
A replacement drive can be commissioned by transferring the established machine parameters from a GDC backup or with the EMZ9371BC Keypad XT. The parameter transfer process helps preserve the existing drive configuration, but the replacement must still match the installed 5.5 kW rating, supply arrangement and communication hardware.
ABC Industrial Parts can support preparation of a spare where parameter transfer or configuration recovery is required for an existing Lenze 9300 Servo installation.
Communication and System Integration
The EVS9325-ES has an integrated CAN system bus with CANopen fieldbus communication for system integration in Lenze 9300 Servo applications. These interfaces are key identification points when matching a replacement to an installed drive.
PROFIBUS-DP and INTERBUS connectivity can be added through optional plug-in communication modules. A replacement should therefore be checked against the communication hardware fitted to the original drive before commissioning.
The EMZ9371BC Keypad XT supports local parameterization, status display and diagnostics, while Lenze Global Drive Control provides a software-based configuration and diagnostic interface.
Diagnostics and Status Indication
The DRIVE READY / FAULT LED indicates the general drive state. Green indicates normal operation or drive ready, while red indicates an active trip or fault.
For further troubleshooting, review the fault history buffer through the keypad parameter list or use the diagnostic window in Lenze Global Drive Control. The EMZ9371BC Keypad XT can also be used for parameterization, status display and diagnostics.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| DRIVE READY / FAULT LED | Green or red | Green indicates normal operation or drive ready; red indicates an active trip or fault. |
Replacement and Spare Part Considerations
For a Lenze 9300 Servo replacement, verify the exact part number 13190889, model EVS9325-ES, 5.5 kW rating, supply voltage range and IP20 enclosure requirement. The installed communication arrangement must also match, including the integrated CAN system bus and any optional PROFIBUS-DP or INTERBUS module.
A spare EVS9325-ES may require parameter transfer before it can operate in the machine. Use Lenze Global Drive Control software or the EMZ9371BC Keypad XT to transfer the established parameters and complete commissioning.
The EVS9325-ES is a legacy or discontinued item used for maintaining existing Lenze 9300 Servo systems. Repair, a tested exchange unit or a prepared spare can help restore an established motion-control installation without changing the machine configuration.
Frequently Asked Questions
What is the Lenze 13190889 EVS9325-ES?
It is a 5.5 kW AC servo drive and servo inverter from the Lenze 9300 Servo product family, with integrated position-controller functionality.
What supply does the EVS9325-ES require?
The drive accepts a 320-528 V AC three-phase supply at 45-65 Hz or a 460-740 V DC bus supply.
Which communication interfaces are available?
The drive includes a CAN system bus with CANopen communication. PROFIBUS-DP and INTERBUS can be added through optional plug-in communication modules.
How can parameters be transferred to a replacement drive?
Parameters can be transferred using Lenze Global Drive Control software or the EMZ9371BC Keypad XT operating module.
How can the drive state or fault condition be checked?
The DRIVE READY / FAULT LED is green for normal operation or drive ready and red for an active trip or fault. The fault history buffer can be reviewed through the keypad parameter list, and diagnostics are also available in Global Drive Control.
What should be checked before replacing an EVS9325-ES?
Match the exact part number and model, 5.5 kW rating, supply requirements, communication hardware and existing machine configuration before commissioning the replacement.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.