Lenze 00408452 EVS9323-ES 9300 Servo Drive
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 00408452 EVS9323-ES is a servo drive in the Lenze 9300 Servo Series for motion-control equipment. It is rated at 1.5 kW (2 HP) and is designed for three-phase 400/480 V AC industrial power systems. The servo inverter provides 3.9 A continuous output current and up to 5.85 A maximum output current. Its IP20 enclosure is intended for installation inside a protected control cabinet.
For machine integration, the EVS9323-ES provides five digital inputs, two analog inputs, four digital outputs and two analog outputs. These onboard I/O points support control signals, setpoints, status feedback and machine interfacing where they match the existing control design. When commissioning a replacement, check the part number, three-phase supply, 1.5 kW rating, output-current requirements, motor configuration, control wiring and I/O arrangement against the installed Lenze 9300 Servo Series drive.
The EVS9323-ES is discontinued by Lenze and is therefore relevant to legacy-machine replacement and spare-part planning. Before installing a replacement servo drive, verify the 400/480 V AC electrical requirements, the continuous and maximum output current, the required I/O points and the protected control-cabinet arrangement. The existing machine design must match the drive specification for the replacement to be suitable.
Technical Specifications
| Manufacturer | Lenze |
| Part number | 00408452 |
| Model/type | EVS9323-ES |
| Component type | Servo drive |
| Product family | 9300 Servo Series |
| Rated power | 1.5 kW (2 HP) |
| Input supply | 3-phase, 400/480 V AC |
| Input voltage range | 320-528 V AC |
| Continuous output current | 3.9 A |
| Maximum output current | 5.85 A |
| Switching frequency | 8 or 16 kHz |
| Digital inputs | 5 |
| Analog inputs | 2 |
| Digital outputs | 4 |
| Analog outputs | 2 |
| Ingress protection rating | IP20 |
| Lifecycle status | Discontinued by manufacturer |
Replacement and Spare Part Considerations
The Lenze 00408452 EVS9323-ES is a discontinued 9300 Servo Series servo drive for legacy machine maintenance. Replacement checks should begin with the exact part number, the three-phase 400/480 V AC supply requirement, the 1.5 kW rated power and the 3.9 A continuous output current.
The replacement must also match the maximum output-current requirement, motor configuration, five digital inputs, two analog inputs, four digital outputs and two analog outputs used by the machine. Confirm that the IP20 drive can be installed inside the existing protected control cabinet and that the control wiring matches the installed arrangement.
The alternative part number 00450920 must not be treated as interchangeable without checking compatibility with the existing installation. Compare the drive rating, supply, I/O requirements and machine control arrangement before selecting a spare.
Frequently Asked Questions
What is the Lenze 00408452 EVS9323-ES?
It is a Lenze 9300 Servo Series servo drive rated at 1.5 kW (2 HP) for three-phase 400/480 V AC industrial power systems.
What output current does the EVS9323-ES provide?
The drive provides 3.9 A continuous output current and up to 5.85 A maximum output current.
What I/O is integrated into the Lenze EVS9323-ES?
The drive has five digital inputs, two analog inputs, four digital outputs and two analog outputs.
What must be checked before using this servo drive as a replacement?
Check the exact part number, three-phase 400/480 V AC supply, 1.5 kW rating, output-current requirements, motor configuration, control wiring and required I/O arrangement.
Where should the EVS9323-ES be installed?
The IP20 servo drive is intended for installation inside a protected control cabinet.
Is the Lenze 00408452 EVS9323-ES discontinued?
Yes. The EVS9323-ES is discontinued by Lenze and is used for legacy-machine replacement and spare-part planning.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.