AMK AW12/18 Amkasyn Servo Drive Module
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The AMK AW12/18 is an Amkasyn servo drive module for industrial motor control in existing AMK automation systems. It provides a rated current of 20 A and a maximum output frequency of 500 Hz, making it relevant to maintenance teams supporting legacy production machinery, automated material-handling equipment and other installations built around AMK Amkasyn technology. The AW12/18 is a discontinued industrial component used where an exact replacement is preferred over a complete control-system retrofit.
Before commissioning a replacement AMK AW12/18, match the complete part number, hardware revision, wiring, input supply, motor requirements and installed control-system configuration with the existing machine. The Amkasyn AW-series is associated with a three-phase 400 V AC input supply with a tolerance of ±10 percent; check this electrical requirement against the machine schematic and cabinet design before installation. Compatibility also depends on the existing AMK Amkasyn drive system and the electrical and hardware revision requirements of the installation.
For replacement and troubleshooting work, first compare the replacement unit with the failed drive and verify the supply, wiring, motor requirements and control-system configuration before energising the cabinet. The AW12/18 supports continued operation of legacy AMK automation equipment and is typically relevant to refurbished, surplus or secondary-market replacement requirements. Where the installed revision or application does not match, a direct replacement or modernization alternative should be assessed by a qualified automation engineer.
Technical Specifications
| Manufacturer | AMK |
| Part number | AW12/18 |
| Model/type | Amkasyn |
| Product family | Amkasyn |
| Component type | Servo drive module |
| Input line voltage, Amkasyn AW-series | 3 x 400 ± 10 V AC |
| Rated output current | 20 A |
| Maximum output frequency | 500 Hz |
| Lifecycle status | Discontinued |
Replacement and Spare Part Considerations
Use the AMK AW12/18 as a replacement option for existing Amkasyn drive systems only after checking the complete part number, hardware revision, wiring, input supply, motor requirements and installed control-system configuration. Legacy AMK AW-series installations require matching electrical and hardware revision conditions for a suitable replacement.
The Amkasyn AW-series is associated with a three-phase 400 V AC input supply with a tolerance of ±10 percent, while the AW12/18 provides a 20 A rated current and up to 500 Hz output frequency. Compare these values with the machine schematic, motor data and cabinet design before installing a spare unit. A replacement may be sourced through refurbished, surplus or secondary-market industrial automation channels because the component is discontinued.
The AW12/18 supports continued operation of existing AMK Amkasyn machinery without immediately replacing the complete drive architecture. If the replacement revision, electrical ratings or control-system configuration do not match the installed unit, evaluate the application with a qualified automation engineer before returning the machine to service.
Frequently Asked Questions
What is the AMK AW12/18?
The AMK AW12/18 is an Amkasyn servo drive module for industrial motor control in existing AMK automation systems.
What are the main electrical ratings of the AW12/18?
The AW12/18 has a rated current of 20 A and a maximum output frequency of 500 Hz. The Amkasyn AW-series is associated with a three-phase 400 V AC input supply with a tolerance of ±10 percent.
What should be checked before ordering an AW12/18 replacement?
Check the complete part number, hardware revision, wiring, input supply, motor requirements and installed control-system configuration against the existing AMK Amkasyn installation.
Is the AMK AW12/18 a current production component?
The AMK AW12/18 is discontinued and is relevant to refurbished, surplus or secondary-market replacement requirements for legacy Amkasyn machinery.
Can the AW12/18 replace a unit in any AMK drive system?
The AW12/18 is intended as a replacement option for existing AMK Amkasyn drive systems, subject to application verification and matching electrical and hardware revision requirements.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of AMK.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.