REO Elektronik REOVIB MFS 168 Vibratory Feeder Frequency Converter

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The REO Elektronik REOVIB MFS 168 is a frequency converter for vibratory feeders, bowl feeders, vibratory conveyors and similar material-handling equipment. It controls the drive output to support stable, repeatable material flow in automated feeding systems. The unit provides constant amplitude regulation to compensate for mains-voltage fluctuations and mechanical load changes, and it can automatically detect and track the resonant frequency of the connected vibratory system when used with an external REOVIB SW acceleration sensor.
The REOVIB MFS 168 accepts 110–240 V AC at 50–60 Hz and provides an adjustable 30–140 Hz output frequency. Depending on the configuration, the maximum output current is 3 A, 6 A or 8 A, while the output voltage can be configured for ranges up to 95/100 V AC or 205 V AC. Replacement commissioning includes matching the output-current variant, output-voltage configuration, enclosure type and sensor arrangement to the installed feeder system. A 0–10 V or 0–20 mA external setpoint, a 24 V DC external enable input and an adjustable 0–5 second soft-start ramp support integration with the machine control system. Parameters can be adjusted through the integrated digital display, potentiometer and control buttons and stored in internal non-volatile memory.
The integrated digital display provides operating status, parameter settings and system-condition information, while the changeover relay output supports external status monitoring at 250 V and 1 A. When troubleshooting a replacement, check the supply range, output-current configuration, feeder and sensor connections, external setpoint or enable wiring, and the stored parameter settings. The correct IP20 cabinet or IP54 standalone configuration must also match the installation. For internal faults affecting the converter electronics, a repair or tested exchange unit can be more practical than continued field troubleshooting.
Technical Specifications
| Manufacturer | REO Elektronik |
| Part number | REOVIB MFS 168 |
| Model/type | REOVIB MFS 168 Frequency Converter |
| Product family | REOVIB |
| Component type | Frequency Converter for Vibratory Feeders |
| Supply voltage | 110–240 V AC (±10%) |
| Supply frequency | 50–60 Hz |
| Output voltage | 0–205 V AC |
| Selectable output voltage range | Up to 95/100 or 205 V AC |
| Maximum output current | 3, 6 or 8 A, configuration-dependent |
| Output frequency | 30–140 Hz |
| Soft-start ramp | 0–5 s |
| Amplitude regulation | Constant amplitude control compensates for mains-voltage and mechanical-load variations |
| Resonant-frequency detection | Automatic tracking with external acceleration sensor |
| External enable input | 24 V DC digital input |
| External setpoint input | 0–10 V or 0–20 mA |
| Status relay output | Changeover contact, 250 V, 1 A |
| Sensor supply output | 24 V DC, 100 mA |
| Enclosure protection | IP20 or IP54, configuration-dependent |
| User interface | Integrated digital display, potentiometer and control buttons |
| Configuration storage | Internal non-volatile memory |
Communication and System Integration
The REOVIB MFS 168 integrates with feeder control systems through a 0–10 V or 0–20 mA external setpoint input and a 24 V DC digital input for external enable or lock functionality. A 24 V DC, 100 mA output is provided for the external acceleration sensor, including the REOVIB SW used for automatic resonant-frequency detection and tracking.
A changeover relay output rated at 250 V and 1 A provides operational status signaling for an external controller or monitoring circuit. The integrated digital display, potentiometer and control buttons allow local parameterization and manual adjustment without a separate control interface.
Diagnostics and Status Indication
Operating status, parameter settings and system conditions are shown on the integrated digital display. The front control interface combines the display with a potentiometer and control buttons for configuration, monitoring and manual adjustment.
External monitoring is available through the changeover relay output, rated at 250 V and 1 A. During troubleshooting, check the supply range, output configuration, feeder drive and acceleration-sensor connections, external setpoint wiring, 24 V DC enable signal and stored parameters.
Replacement and Spare Part Considerations
A replacement REOVIB MFS 168 must match the installed feeder system in key configuration areas. Confirm the required 3 A, 6 A or 8 A maximum output current, the selected output-voltage range, the IP20 cabinet or IP54 standalone enclosure and the use of an external REOVIB SW acceleration sensor where automatic resonance tracking is required.
Before commissioning a spare, transfer or recreate the operating parameters using the integrated display and control interface. Check the 0–10 V or 0–20 mA setpoint connection, 24 V DC enable circuit, sensor supply and status-relay wiring, then verify the soft-start setting and feeder response. Internal non-volatile memory supports storage of user settings within the unit.
For an exchange or repair decision, compare the complete part number and configuration rather than relying on the REOVIB MFS 168 designation alone. Output current, voltage arrangement, enclosure protection and sensor configuration can affect compatibility with the existing vibratory feeder or conveyor drive.
Frequently Asked Questions
What is the REO REOVIB MFS 168 used for?
The REOVIB MFS 168 is a frequency converter for vibratory feeders, bowl feeders and vibratory conveyors. It controls feeder drive output to support consistent material flow.
Which supply voltage and output frequency does the REOVIB MFS 168 support?
The unit accepts 110–240 V AC (±10%) at 50–60 Hz and provides an adjustable output frequency of 30–140 Hz.
Which output-current variant is required for a replacement?
The REOVIB MFS 168 is available with configuration-dependent maximum output currents of 3 A, 6 A or 8 A. The replacement must match the feeder drive and load requirements.
Can the REOVIB MFS 168 track the feeder resonance automatically?
Yes. Automatic resonant-frequency detection and tracking is available when the unit is used with an external acceleration sensor such as the REOVIB SW.
How is the REOVIB MFS 168 integrated into a machine control system?
Integration uses a 0–10 V or 0–20 mA external setpoint input, a 24 V DC digital enable input, a 24 V DC sensor supply rated at 100 mA and a changeover status relay rated at 250 V and 1 A.
How should a replacement REOVIB MFS 168 be commissioned?
Match the output-current variant, output-voltage configuration, enclosure type and sensor arrangement. Then check the supply, feeder and sensor wiring, external setpoint and enable signals, stored parameters and the 0–5 second soft-start setting.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of REO Elektronik.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



