Danfoss 175Z7804 VLT 6000S/8000S LCP Keypad
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Danfoss 175Z7804 is a Local Control Panel (LCP) keypad and HMI operator interface for Danfoss VLT 6000S and VLT 8000S frequency inverters. It provides local programming, operation and monitoring through an LCD display that shows real-time drive parameters such as output frequency and motor current, together with status notifications, warnings, alarms and alphanumeric fault descriptions. The keypad is front-mounted and has an IP65 front-mounted protection rating.
This VLT LCP keypad uses a direct plug-in installation and communicates with the drive main control board through an internal multi-pin connector. During a replacement or commissioning task, drive parameters can be uploaded, downloaded and transferred between compatible drives. For remote installation, the 175Z0850 remote-mounting kit with 3 m cable, the 175Z7802 IP54 remote-mounting kit with 3 m cable and the 175Z0929 3 m LCP cable are compatible accessories.
For troubleshooting, the LCD provides access to operating values, warnings, alarms and alphanumeric fault descriptions, while the LED indicators show drive On, Warning and Alarm conditions. Before fitting a spare, confirm that the drive belongs to the VLT 6000S or VLT 8000S series and check the internal multi-pin connection and mounting arrangement. The 175Z7804 is a discontinued Danfoss replacement component for maintaining compatible legacy drive installations.
Technical Specifications
| Manufacturer | Danfoss |
| Part number | 175Z7804 |
| Model/type | Keypad LCP for 6000S/8000S only |
| Component type | HMI operator interface |
| Product family | VLT |
| Compatible drive series | Danfoss VLT 6000S and VLT 8000S frequency inverters |
| Mounting method | Front-mounted, direct plug-in |
| Protection rating | IP65 front-mounted |
| Drive interface | Internal multi-pin plug-in connector |
| Interface function | Communication between LCP keypad and VFD main control board |
| Display function | LCD display for real-time drive parameters, status, alarms, and fault descriptions |
| Parameter transfer | Drive parameter upload, download, and transfer between compatible drives |
| Lifecycle status | Discontinued |
Programming and Configuration
The 175Z7804 provides local programming and monitoring for compatible Danfoss VLT 6000S and VLT 8000S frequency inverters. The LCD keypad gives access to drive parameters, operating values, warnings, alarms and alphanumeric fault descriptions.
Parameter backup and transfer are supported between compatible drives. A replacement keypad or drive commissioning task can therefore include uploading parameters from one compatible drive and downloading or transferring them to another.
Before commissioning, match the replacement to the VLT 6000S or VLT 8000S drive series and confirm the direct plug-in connection to the drive control board.
Communication and System Integration
The keypad communicates with the VFD main control board through an internal multi-pin plug-in connector. Its direct plug-in, front-mounted arrangement is intended for compatible Danfoss VLT 6000S and VLT 8000S frequency inverters.
Remote installation is supported with the 175Z0850 remote-mounting kit with 3 m cable, the 175Z7802 IP54 remote-mounting kit with 3 m cable, or the 175Z0929 3 m LCP cable. These accessories allow the LCP interface to be positioned separately from the drive when the installation requires remote mounting.
The 175Z7804 should be matched by drive series and connection arrangement before installation. It is intended for VLT 6000S and VLT 8000S systems rather than as a general keypad for other VLT drive families.
Diagnostics and Status Indication
The LCD displays real-time drive parameters including output frequency and motor current. It also presents status notifications, warnings, alarms and alphanumeric fault descriptions for local assessment of the connected drive.
Visual LED indications show the drive On, Warning and Alarm conditions. During troubleshooting, use the displayed operating values and status indications together with a check of the drive series, keypad seating and internal multi-pin connection.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| LED Indicators | Provides visual drive status notifications, including On, Warning, and Alarm conditions |
Replacement and Spare Part Considerations
For a replacement, the key compatibility check is the drive series: the Danfoss 175Z7804 is intended for VLT 6000S and VLT 8000S frequency inverters. Confirm the part number, front-mounted installation and internal multi-pin plug-in connection before fitting the spare.
The keypad supports parameter upload, download and transfer between compatible drives. Include parameter transfer in the commissioning procedure when the replacement is being used to restore local programming, monitoring or drive setup.
The 175Z7804 is discontinued and is used as a maintenance replacement for compatible legacy drive installations. The 175Z0850, 175Z7802 and 175Z0929 accessories support remote LCP installation with the stated cable arrangements.
Frequently Asked Questions
Which drives are compatible with the Danfoss 175Z7804 keypad?
The 175Z7804 is intended for Danfoss VLT 6000S and VLT 8000S series frequency inverters. Confirm the drive series before ordering or installing the keypad.
How does the 175Z7804 connect to the drive?
It uses a front-mounted, direct plug-in installation and communicates with the VFD main control board through an internal multi-pin connector.
Can drive parameters be transferred with this LCP keypad?
Yes. The keypad supports drive parameter upload, download and transfer between compatible drives, helping restore drive setup during replacement and commissioning.
What can the LCD display show?
The LCD displays real-time drive parameters including output frequency and motor current, as well as status notifications, warnings, alarms and alphanumeric fault descriptions.
How does the keypad indicate drive status?
The LED indicators provide visual notifications for drive On, Warning and Alarm conditions. The LCD also shows operating values, warnings, alarms and fault descriptions.
Can the 175Z7804 be installed remotely?
Remote installation is supported with the 175Z0850 remote-mounting kit with 3 m cable, the 175Z7802 IP54 remote-mounting kit with 3 m cable, or the 175Z0929 3 m LCP cable.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Danfoss.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.