Siemens 6SN1123-1AB00-0CA2 SIMODRIVE 611 LT Module

New 
On request
Refurbished   
2 available for direct collection
8 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMODRIVE | Series: SIMODRIVE 611

The Siemens 6SN1123-1AB00-0CA2 is a two-axis LT servo drive power module for the SIMODRIVE 611 modular drive converter system. It provides up to 50 A peak transistor current per axis and is designed for 1FT5 and 1FT6 synchronous motors as well as compatible induction motors. The module uses internal heat dissipation and forms part of a modular servo drive architecture for legacy CNC machine tools and industrial equipment.

The LT module connects to the SIMODRIVE 611 DC link through the system busbar and accepts a plug-in SIMODRIVE 611 control unit through its internal slot, including compatible 6SN1118 control boards. Parameters and firmware are held by the inserted control unit rather than by the power module itself. When installing a replacement, the existing control board may need to be transferred, and the axis count, motor type, current ratings, cooling arrangement, DC link connection and control-unit fit must match the machine configuration.

For a SIMODRIVE 611 replacement, check that the two-axis capacity and motor current requirements correspond to the installed servo axes. The 1FT5 synchronous motor rating is 25 A, the 1FT6 synchronous motor rating is 18 A, the induction motor rated current is 24 A, and the induction motor peak current is 32 A; synchronous motor peak current is 36 A. The discontinued Siemens module is therefore primarily relevant to repair, retrofit and spare-part programs where the complete drive architecture remains in service.

Technical Specifications

ManufacturerSiemens
Part number6SN1123-1AB00-0CA2
Model/typeLT Module
Component typeServo drive power module
Product familySIMODRIVE
SeriesSIMODRIVE 611
Number of axes2 axes
Peak transistor current50 A per axis
Rated motor current for 1FT5 synchronous motors25 A
Rated motor current for 1FT6 synchronous motors18 A
Rated current for induction motors24 A
Peak current for induction motors32 A
Peak current for synchronous motors36 A
Cooling methodInternal heat dissipation
DC link connectionSIMODRIVE 611 DC link busbar connection
Control unit interfaceInternal slot for SIMODRIVE 611 control unit card

Communication and System Integration

The Siemens 6SN1123-1AB00-0CA2 integrates into a SIMODRIVE 611 modular drive converter through the system DC link busbar. It is intended to work with a compatible SIMODRIVE 611 line infeed or regenerative module and the associated modular drive architecture.

An internal slot accommodates a plug-in SIMODRIVE 611 control unit, including applicable 6SN1118 control boards. The control unit provides the parameter and firmware storage for the drive system, while the LT module supplies the two-axis power stage. Replacement matching must therefore include the control-unit interface as well as the DC link and motor connections.

Replacement and Spare Part Considerations

Use the complete part number 6SN1123-1AB00-0CA2 when identifying a Siemens SIMODRIVE 611 replacement. The two-axis format, motor type, current requirements, internal heat dissipation arrangement, SIMODRIVE 611 DC link busbar connection and compatible control-unit fit all need to correspond to the installed system.

The replacement LT module does not itself hold the drive parameters and firmware; these are held by the inserted control unit. A spare may therefore require transfer of the existing compatible control board before commissioning. Check the control-board fit and the installed machine configuration before putting the replacement into service.

This discontinued Siemens module is suited to maintaining legacy SIMODRIVE 611 systems without replacing the complete drive architecture. It is relevant for repair, retrofit and spare-part requirements involving CNC machine tools, industrial machinery and production equipment.

Frequently Asked Questions

What is the Siemens 6SN1123-1AB00-0CA2?

It is a two-axis LT servo drive power module for the Siemens SIMODRIVE 611 modular drive converter system.

What peak current does this SIMODRIVE 611 LT module provide?

The module provides 50 A peak transistor current per axis. The specified peak current is 36 A for synchronous motors and 32 A for induction motors.

Which motors are supported by the 6SN1123-1AB00-0CA2?

The module is designed for 1FT5 and 1FT6 synchronous motors and compatible induction motors. The rated motor currents are 25 A for 1FT5, 18 A for 1FT6 and 24 A for induction motors.

What must be checked before replacing a SIMODRIVE 611 LT module?

Check the two-axis requirement, motor type and current ratings, internal heat dissipation arrangement, SIMODRIVE 611 DC link busbar connection and compatibility of the inserted control unit, including applicable 6SN1118 control boards.

Are the parameters and firmware stored in the LT power module?

No. Parameters and firmware are held by the inserted SIMODRIVE 611 control unit. During replacement, the existing compatible control board may need to be transferred to the replacement LT module.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.