Vacon NXP03855A0N0SSAA1A2A500C5 NXP AC Drive

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Vacon NXP03855A0N0SSAA1A2A500C5 is an NXP AC drive and frequency inverter for high-power industrial motor control. This air-cooled Vacon NX drive is rated at 385 A and 200 kW for 380-500 V AC, three-phase systems, with an output frequency range of 0-320 Hz. It supports U/f frequency control, open-loop sensorless vector control and closed-loop vector control for AC induction motors and permanent magnet synchronous motors.
For replacement commissioning, this configuration includes factory-installed OPTA1, OPTA2, OPTA5 and OPTC5 option boards. OPTA1 provides six digital inputs, two analog inputs, one analog output, one digital output, a reference voltage and an auxiliary 24 V output. OPTA2 provides two relay outputs, OPTA5 provides a 10-30 V HTL incremental encoder input, and OPTC5 provides PROFIBUS DP through a DB9 connector at data rates up to 12 Mbps. Parameters can be backed up and restored with the removable NXP Control Keypad or Vacon Live software; transfer requires matching control-board generation, firmware, power rating and option-board configuration.
The Vacon NXP platform provides embedded IEC 61131-3 programmable PLC functionality for application-specific drive logic. Vacon Live supports commissioning, parameter configuration and monitoring, while the NXP Control Keypad provides a diagnostic display and fault memory log. PROFIBUS DP diagnostic registers and keypad-based parameter backup and restoration support troubleshooting and system recovery when a spare drive is installed.
Technical Specifications
| Manufacturer | Vacon |
| Part number | NXP03855A0N0SSAA1A2A500C5 |
| Model/type | NXP Drive |
| Component type | Frequency inverter |
| Product family | Vacon NX |
| Rated output current | 385 A |
| Supply voltage | 380-500 V AC, 3-phase |
| Rated power | 200 kW |
| Output frequency range | 0-320 Hz |
| Control methods | U/f frequency control; open-loop sensorless vector control; closed-loop vector control |
| Cooling method | Air-cooled |
| Motor compatibility | AC induction motors and permanent magnet synchronous motors |
| Digital inputs | 6 inputs |
| Analog inputs | 2 inputs |
| Analog outputs | 1 output |
| Digital output | 1 output |
| Relay outputs | 2 outputs |
| Encoder feedback | 10-30 V HTL incremental encoder input |
| Fieldbus interface | PROFIBUS DP via factory-installed OPTC5 board |
| PROFIBUS connector | DB9 |
| PROFIBUS DP maximum data rate | 12 Mbps |
| Embedded PLC | IEC 61131-3 programmable PLC functionality |
| Factory-installed option boards | OPTA1, OPTA2, OPTA5 and OPTC5 |
Programming and Configuration
Vacon Live is used for commissioning, parameter configuration and monitoring of the NXP drive. The Vacon NXP platform also includes embedded IEC 61131-3 programmable PLC functionality, allowing application-specific drive logic within the drive platform.
The removable NXP Control Keypad and Vacon Live software support parameter backup and restoration. When transferring parameters to a replacement, match the control-board generation, firmware, power rating and option-board configuration before commissioning the drive.
Communication and System Integration
The factory-installed OPTC5 board provides PROFIBUS DP communication through a DB9 connector, with data rates up to 12 Mbps. This allows the drive to integrate with PROFIBUS DP automation networks and distributed PLC systems.
The integrated OPTA1 board provides six digital inputs, two analog inputs, one analog output, one digital output, a reference voltage and an auxiliary 24 V output. OPTA2 adds two relay outputs, while OPTA5 provides a 10-30 V HTL incremental encoder input for closed-loop vector control.
Diagnostics and Status Indication
Vacon Live provides commissioning, parameter configuration and monitoring functions for the NXP drive. The NXP Control Keypad includes a diagnostic display and fault memory log for reviewing the drive state and stored faults.
PROFIBUS DP diagnostic registers provide network-level diagnostic information. The removable control keypad can also be used for parameter backup and restoration when recovering or commissioning a replacement drive.
Replacement and Spare Part Considerations
A replacement for Vacon NXP03855A0N0SSAA1A2A500C5 should match the 385 A, 200 kW rating, 380-500 V AC three-phase supply range and factory-installed OPTA1, OPTA2, OPTA5 and OPTC5 configuration. The PROFIBUS DP interface, DB9 connector and 10-30 V HTL encoder input are key points to check against the installed drive.
Before returning a spare to service, transfer the required parameters using the NXP Control Keypad or Vacon Live and confirm compatibility of the control-board generation, firmware, power rating and option boards. Existing motor-control settings, encoder feedback and PROFIBUS DP integration should be checked during commissioning.
Frequently Asked Questions
What is the rated power and current of the Vacon NXP03855A0N0SSAA1A2A500C5?
The drive is rated at 200 kW and 385 A for 380-500 V AC, three-phase systems.
Which communication interface is installed on this Vacon NXP drive?
The drive has a factory-installed OPTC5 PROFIBUS DP board with a DB9 connector and data rates up to 12 Mbps.
Which motor control methods does the NXP drive support?
It supports U/f frequency control, open-loop sensorless vector control and closed-loop vector control for AC induction motors and permanent magnet synchronous motors.
How can parameters be transferred to a replacement drive?
Parameters can be backed up and restored using the removable NXP Control Keypad or Vacon Live software. The control-board generation, firmware, power rating and option-board configuration must match for the transfer.
How can the Vacon NXP drive be diagnosed?
Vacon Live provides monitoring, the NXP Control Keypad provides a diagnostic display and fault memory log, and PROFIBUS DP diagnostic registers provide network-level diagnostic information.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Vacon.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



