Stöber Antriebstechnik FDS4040/B POSIDRIVE FDS 4000 Frequency Inverter

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Stöber Antriebstechnik FDS4040/B is a POSIDRIVE FDS 4000 frequency inverter and servo converter for 2.2 kW motor applications. It is designed for three-phase 400 V AC installations and has a rated current of 5.5 A. The BG II frame size provides an important mechanical identity cue when matching a replacement in an existing cabinet. The POSIDRIVE FDS 4000 supports motor control through VC, SLVC and V/f operating modes.
When commissioning an FDS4040/B spare, the electrical rating, BG II frame size, motor feedback arrangement and existing control interfaces must match the machine installation. The drive provides an AE1 0-10 V reference input for speed commands and a built-in incremental encoder feedback input for vector control. Existing drive configuration, control wiring and mounting arrangements should be retained or transferred as part of the replacement work. ABC Industrial Parts can support repair and exchange requirements for legacy Stöber drive systems.
For replacement planning, check the three-phase 400 V AC supply, 5.5 A rated current, 2.2 kW motor rating, 3 x 10 AT recommended line fuse and 88 W power loss. Confirm whether the application uses VC with incremental encoder feedback, SLVC without encoder feedback or V/f control for multi-motor operation. As a discontinued legacy product, the FDS4040/B is relevant for like-for-like replacement and repair of established POSIDRIVE FDS 4000 installations.
Technical Specifications
| Manufacturer | Stöber Antriebstechnik |
| Part number | FDS4040/B |
| Model/type | Posidrive FDS 4000 |
| Component type | Frequency inverter / servo converter |
| Product family | POSIDRIVE FDS 4000 |
| Rated power | 2.2 kW |
| Supply voltage | 3-phase, 400 (+28% / -55%) V AC |
| Supply frequency | 50/60 Hz |
| Rated current | 5.5 A |
| Recommended line fuse | 3 x 10 AT |
| Power loss | 88 W |
| Frame size | BG II |
| Analog input | AE1, 0-10 V reference input |
| Incremental encoder input | Built-in feedback input for vector control |
| Control modes | VC, SLVC and V/f |
| VC mode | Very Dynamic Vector Control with incremental feedback |
| SLVC mode | Sensorless Vector Control |
| V/f mode | Frequency control for multi-motor operation |
| Lifecycle status | Discontinued legacy product |
Communication and System Integration
The FDS4040/B integrates with conventional machine-control wiring through its AE1 analog input, which accepts a 0-10 V speed reference. This allows the drive to receive a speed command from an existing controller, potentiometer or machine-control circuit using the same reference principle.
For applications requiring feedback-based vector control, the built-in incremental encoder input provides the feedback interface used by VC mode. SLVC operation provides sensorless vector control without encoder feedback, while V/f control supports multi-motor operation. Match the selected control mode and feedback arrangement to the existing motor-control architecture before commissioning a replacement.
Replacement and Spare Part Considerations
Use the exact FDS4040/B part number together with the POSIDRIVE FDS 4000 model, 2.2 kW rating, 5.5 A rated current and BG II frame size when identifying a spare. The replacement installation must also match the three-phase 400 V AC supply, motor feedback requirements and available 0-10 V control interface.
The selected operating mode affects replacement compatibility. VC requires incremental encoder feedback, SLVC provides sensorless vector control, and V/f is intended for multi-motor operation. Check the machine's existing drive configuration and control wiring before fitting the spare, rather than relying on the power rating alone.
The FDS4040/B is a discontinued legacy drive. Remaining units, repaired drives and exchange solutions can therefore be relevant when the objective is to keep an established Stöber installation running without an immediate machine redesign. ABC Industrial Parts supports repair and exchange requirements for this type of legacy drive.
Frequently Asked Questions
What is the Stöber FDS4040/B?
The FDS4040/B is a Stöber Antriebstechnik POSIDRIVE FDS 4000 frequency inverter and servo converter rated at 2.2 kW for three-phase 400 V AC motor applications.
Which control modes does the FDS4040/B support?
The drive supports VC, SLVC and V/f control. VC is Very Dynamic Vector Control with incremental feedback, SLVC is Sensorless Vector Control, and V/f is frequency control for multi-motor operation.
Does the FDS4040/B accept a 0-10 V speed reference?
Yes. The AE1 analog input accepts a 0-10 V reference for speed commands from a controller, potentiometer or existing machine-control circuit.
When is incremental encoder feedback required?
Incremental encoder feedback is used for VC mode. SLVC provides sensorless vector control, while V/f control is intended for multi-motor operation.
What should be checked before replacing an FDS4040/B?
Check the FDS4040/B part number, POSIDRIVE FDS 4000 model, 2.2 kW rating, three-phase 400 V AC supply, 5.5 A current, BG II frame size, 0-10 V reference interface and motor feedback arrangement.
Is the Stöber FDS4040/B still a current product?
The FDS4040/B is a discontinued legacy product, so repair, exchange and like-for-like replacement are relevant options for established POSIDRIVE FDS 4000 installations.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Stöber Antriebstechnik.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



