Siemens 6SL3244-0BB12-1FA0 SINAMICS G120 Control Unit

New 
10+ available within 2 - 3 business days
Refurbished   
10+ available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SINAMICS G120

The Siemens 6SL3244-0BB12-1FA0 is a SINAMICS G120 CU240E-2 PN Control Unit for modular industrial frequency inverter systems. It mounts directly onto compatible SINAMICS G120 Power Modules, including supported PM240-2 and PM250 configurations, to create a complete drive solution. The Control Unit provides a dual-port PROFINET interface with RJ45 connectivity, flexible digital and analog I/O, a 24 V DC supply, and integrated Safety Integrated Safe Torque Off (STO).

The unit supports commissioning and parameterization through its integrated Micro-USB interface, STARTER software, and TIA Portal Startdrive. BOP-2 and IOP-2 operator panels can also be used for parameterization, commissioning, and diagnostics. Parameters can be stored in internal non-volatile flash memory or transferred, backed up, and restored using an SD/MMC memory card. When preparing a replacement, the Power Module, unit type, firmware version, PROFINET device name, and IP address must match the installation requirements.

For troubleshooting, the CU240E-2 PN can be accessed through a BOP-2 or IOP-2 operator panel, STARTER, or TIA Portal Startdrive. The alarm buffer, fault buffer, and diagnostic status parameters support analysis of the SINAMICS drive system. Before returning a replacement to service, check the 24 V DC supply, connected Power Module, PROFINET connection, transferred parameters, and network addressing. The unit supports motor temperature sensors of type PTC, KTY84, or Pt1000.

Technical Specifications

ManufacturerSiemens
Part number6SL3244-0BB12-1FA0
Model/typeSINAMICS G120 CU240E-2 PN
Product familySINAMICS G120
Component typeControl Unit
Supply voltage24 V DC
Rated current0.5 A
Digital inputs6
Fail-safe digital inputsMaximum 1
Digital outputs3
Analog inputs2
Analog outputs2
PROFINET interfaceIntegrated dual-port interface, RJ45
USB interfaceIntegrated commissioning interface, Micro-USB
Motor temperature sensor supportPTC, KTY84, or Pt1000
Safety functionSafety Integrated STO
Parameter storageInternal non-volatile flash and optional SD/MMC memory card
Configuration backup and restoreSupported

Programming and Configuration

Commissioning and parameterization are supported through Siemens STARTER and TIA Portal Startdrive using the integrated Micro-USB interface. BOP-2 and IOP-2 operator panels provide additional options for parameterization and commissioning.

The CU240E-2 PN stores parameters in internal non-volatile flash memory and supports an optional SD/MMC memory card for parameter transfer, backup, restoration, and firmware updates. A replacement Control Unit may therefore require configuration transfer and firmware alignment before it can operate in the existing SINAMICS G120 installation.

Communication and System Integration

The SINAMICS G120 CU240E-2 PN has an integrated dual-port PROFINET interface with RJ45 connectivity for connection to PROFINET-based industrial automation systems. It is intended for use with compatible SINAMICS G120 Power Modules, including supported PM240-2 and PM250 configurations.

The Control Unit provides six digital inputs, including a maximum of one fail-safe digital input, three digital outputs, two analog inputs, and two analog outputs. Motor temperature monitoring supports PTC, KTY84, or Pt1000 sensors. During replacement commissioning, the PROFINET device name and IP address may need to be reassigned.

Diagnostics and Status Indication

Diagnostics are available through the BOP-2 or IOP-2 operator panel, STARTER software, and TIA Portal Startdrive. The alarm buffer, fault buffer, and diagnostic status parameters can be used to assess the state of the SINAMICS G120 drive system during commissioning and maintenance.

Replacement and Spare Part Considerations

For a replacement of Siemens 6SL3244-0BB12-1FA0, confirm the exact CU240E-2 PN model, the compatible SINAMICS G120 Power Module, and the firmware version required by the installation. The replacement must also be commissioned with the correct PROFINET device name and IP address.

Transfer the existing parameters from internal flash or an SD/MMC memory card, or restore them using STARTER, TIA Portal Startdrive, BOP-2, or IOP-2. Check the 24 V DC supply, I/O wiring, PROFINET connection, motor temperature sensor type, and Safety Integrated STO configuration before returning the drive to operation.

Frequently Asked Questions

What is the Siemens 6SL3244-0BB12-1FA0?

It is a SINAMICS G120 CU240E-2 PN Control Unit for modular industrial frequency inverter systems. It mounts onto compatible SINAMICS G120 Power Modules.

Which communication interface does the CU240E-2 PN provide?

The Control Unit has an integrated dual-port PROFINET interface with RJ45 connectivity. It also includes a Micro-USB interface for commissioning.

Which software can be used to commission this Control Unit?

Commissioning and parameterization are supported with Siemens STARTER and TIA Portal Startdrive. BOP-2 and IOP-2 operator panels can also be used.

How can parameters be transferred to a replacement CU240E-2 PN?

Parameters can be stored in internal non-volatile flash memory or transferred, backed up, and restored using an optional SD/MMC memory card. Configuration can also be handled through STARTER, TIA Portal Startdrive, BOP-2, or IOP-2.

What should be checked when commissioning a replacement?

Check the exact CU240E-2 PN type, compatible Power Module, firmware version, 24 V DC supply, PROFINET device name, IP address, I/O wiring, motor temperature sensor type, and Safety Integrated STO configuration.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.