Siemens 6SE7031-2EP85-0AA0 Masterdrive MC Rectifier Unit

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SE7031-2EP85-0AA0 Masterdrive MC is a SIMOVERT MASTERDRIVES Motion Control (MC) Compact-Plus rectifier unit. It converts three-phase 380-480 V AC line power into the DC link supply required by compatible MASTERDRIVES inverter systems and coordinated industrial motion control configurations. The unit provides a 120 A DC output, supports a 510-650 V DC link voltage range and has a rated power of 50 kW.
For replacement matching, check the complete electrical configuration of the target MASTERDRIVES system. The rectifier accepts three-phase 380-480 V AC at 50-60 Hz, has a rated input current of 108 A and supplies the DC bus used by compatible inverter assemblies. The Compact-Plus format and the required 120 A DC bus capacity should match the installed system, while the IP20 protection rating requires installation in a suitable protected equipment enclosure.
The 6SE7031-2EP85-0AA0 is a central DC bus power component rather than a standalone drive. Replacement checks should therefore include the AC supply, DC link voltage, DC bus current requirement, MASTERDRIVES Motion Control configuration and enclosure conditions before the unit is returned to service. This Siemens component is identified as a phase-out legacy product, making exact part-number and system-suitability checks important when arranging a spare or replacement.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6SE7031-2EP85-0AA0 |
| Model/type | Masterdrive MC |
| Component type | Rectifier Unit |
| Product family | SIMOVERT MASTERDRIVES |
| Series | Motion Control (MC) Compact-Plus |
| Supply voltage | 380-480 V AC |
| Input phases | 3 phase |
| Supply frequency | 50-60 Hz |
| Rated input current | 108 A |
| DC output current | 120 A |
| DC link voltage | 510-650 V DC |
| Rated power | 50 kW |
| Protection rating | IP20 |
Replacement and Spare Part Considerations
Use the exact Siemens part number 6SE7031-2EP85-0AA0 as the starting point for replacement identification. The replacement must match the SIMOVERT MASTERDRIVES Motion Control (MC) Compact-Plus configuration, the three-phase 380-480 V AC supply, the 510-650 V DC link range and the 120 A DC bus requirement. The 50 kW rating and IP20 protection rating are also relevant to the installed drive system and enclosure.
This phase-out legacy rectifier is intended for compatible MASTERDRIVES inverter assemblies and coordinated industrial motion control configurations. Before commissioning a spare, compare the AC input conditions, rated input current, DC link requirements, Compact-Plus format and protected installation environment with the machine's existing arrangement.
Frequently Asked Questions
What is the Siemens 6SE7031-2EP85-0AA0?
It is a Siemens Masterdrive MC SIMOVERT MASTERDRIVES Motion Control (MC) Compact-Plus rectifier unit that generates the DC link supply for compatible inverter systems.
What input supply does this MASTERDRIVES rectifier require?
The unit accepts a three-phase 380-480 V AC supply at 50-60 Hz and has a rated input current of 108 A.
What DC output does the 6SE7031-2EP85-0AA0 provide?
It provides a 120 A DC output and supports a 510-650 V DC link voltage range. Its rated power is 50 kW.
Which system checks are required before replacing this rectifier?
Check the SIMOVERT MASTERDRIVES Motion Control (MC) Compact-Plus configuration, three-phase 380-480 V AC input, 120 A DC bus requirement, 510-650 V DC link range, 50 kW rating and IP20 enclosure conditions.
Is the Siemens 6SE7031-2EP85-0AA0 a current product?
The 6SE7031-2EP85-0AA0 is identified as a phase-out legacy product, so exact part-number and system-suitability checks are important when arranging a spare or replacement.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



