Siemens 6SE6440-2UD22-2BA1 MICROMASTER 440 Frequency Inverter

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SE6440-2UD22-2BA1 is a MICROMASTER 440 frequency inverter for variable-speed control of compatible three-phase AC motors. This 2.2 kW, 3 hp constant-torque drive accepts a 380-480 V AC, three-phase supply and provides a rated output current of 5.9 A. Its IP20 enclosure and unfiltered 2UD configuration are key identification points when matching a replacement for an installed drive.
The MICROMASTER 440 series supports V/f control, sensorless vector control, closed-loop vector control with an encoder card, and PID control. Commissioning, parameterization and monitoring can be performed with an optional Siemens MICROMASTER 440 Basic Operator Panel or Advanced Operator Panel, while parameter backup and transfer can be handled through an optional AOP keypad or PC software. A replacement therefore requires the installed motor rating, voltage class, control method, parameters and available operator-panel arrangement to be checked before commissioning.
For an existing machine, confirm that the replacement matches the 380-480 V three-phase supply, 2.2 kW constant-torque motor rating, 5.9 A output current and IP20 installation requirements. The 2UD configuration has no integrated EMC filter, so the external EMC filter arrangement must match the installation. Siemens has discontinued the MICROMASTER 440 family and replaced it with the SINAMICS product line, making this part relevant for maintaining existing MICROMASTER 440 equipment; ABC Industrial Parts can support repair or exchange requirements for installed units.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6SE6440-2UD22-2BA1 |
| Model/type | MICROMASTER 440 |
| Product family | MICROMASTER |
| Series | MICROMASTER 440 |
| Component type | Frequency inverter |
| Rated power | 2.2 kW, constant torque |
| Rated motor power | 3 hp, constant torque |
| Supply voltage | 380-480 V AC, 3-phase |
| Rated input current | 7.5 A |
| Output current | 5.9 A |
| Input frequency | 47-63 Hz |
| Maximum output frequency | 650 Hz in V/f control mode |
| Control methods | V/f control, sensorless vector control, closed-loop vector control with encoder card, and PID control |
| Protection rating | IP20 |
| EMC filter | No integrated EMC filter |
| Lifecycle status | Discontinued |
Programming and Configuration
The MICROMASTER 440 can be parameterized, commissioned and monitored with an optional Siemens Basic Operator Panel or Advanced Operator Panel. Parameter backup and transfer are supported through the optional AOP keypad or PC software, allowing the configured drive data to be transferred when the compatible motor and voltage classes are matched.
When preparing a spare, compare the installed drive parameters, motor rating, voltage class, selected control method and firmware compatibility before commissioning. The replacement may require parameter restoration and alignment with the machine configuration rather than simple power-up installation.
Replacement and Spare Part Considerations
Use the complete part number 6SE6440-2UD22-2BA1 when identifying a replacement. The electrical match includes the 380-480 V AC, three-phase supply, 2.2 kW constant-torque rating, 5.9 A output current and IP20 protection rating. Confirm that the installed system uses a compatible three-phase motor and that the required Basic Operator Panel or Advanced Operator Panel is available.
The unfiltered 2UD configuration has no integrated EMC filter. Check the external EMC filter arrangement against the existing installation before fitting the spare. Transfer or restore the drive parameters with the optional AOP keypad or PC software, then verify the selected V/f, sensorless vector, encoder-based closed-loop vector or PID control configuration.
Because the MICROMASTER 440 family is discontinued, an exact replacement, repair or tested exchange unit may be required to keep an existing machine in service. ABC Industrial Parts can assist with repair and exchange requirements for installed MICROMASTER 440 drives.
Frequently Asked Questions
What is the Siemens 6SE6440-2UD22-2BA1?
It is a Siemens MICROMASTER 440 frequency inverter rated at 2.2 kW or 3 hp for constant-torque control of compatible three-phase AC motors.
What supply does the MICROMASTER 440 6SE6440-2UD22-2BA1 require?
The drive uses a 380-480 V AC, three-phase supply with an input frequency of 47-63 Hz.
Does this Siemens inverter include an EMC filter?
No. The 2UD configuration has no integrated EMC filter, so the external EMC filter arrangement must be checked for the installation.
Which control methods does the MICROMASTER 440 support?
The MICROMASTER 440 series supports V/f control, sensorless vector control, closed-loop vector control with an encoder card, and PID control.
How can parameters be transferred to a replacement drive?
Parameter backup and transfer can be performed through an optional Siemens Advanced Operator Panel or PC software. Motor and voltage classes and compatible firmware must be checked before transfer.
Is the Siemens 6SE6440-2UD22-2BA1 still in production?
The MICROMASTER 440 family is discontinued and was replaced by the SINAMICS product line, including the SINAMICS G120 family. This part is intended for maintaining or replacing existing MICROMASTER 440 equipment.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



