Bosch Rexroth R911305276 CSB01.1 Servo Controller

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: IndraDrive C

The Bosch Rexroth R911305276 is a CSB01.1N-SE-ENS-NNN-NN-S-NN-FW single-axis servo control unit for modular IndraDrive C servo systems. It is a basic control unit that works with compatible IndraDrive HCS power sections to provide single-axis motion control in machine automation equipment. The unit combines an integrated SERCOS II optical master interface with an ENS encoder feedback interface and provides eight digital inputs and three digital outputs for machine-level control signals.

A replacement CSB01 control unit must match the installed SERCOS II and ENS options, the configuration code and the compatible FWA-INDRV-MPB firmware. IndraWorks is used for commissioning, configuration, parameterization and diagnostics. The associated firmware is ordered or flashed separately, while a removable firmware or memory module can retain drive parameters and support configuration backup, restoration and transfer. As a result, commissioning a spare normally requires transferring the correct parameters and confirming firmware compatibility rather than simply installing the hardware.

The controller communicates with the motion-control master through SERCOS II optical fiber and supports Bosch Rexroth IndraDyn, EnDat, 1 Vpp and SSI standard encoder feedback through the ENS interface. For troubleshooting, use IndraWorks, SERCOS bus diagnostics and the IndraWorks diagnostic buffer readout to assess the controller and its communication path. If the control unit itself requires repair or exchange, ABC Industrial Parts can support preparation of a replacement using the required configuration and firmware details.

Technical Specifications

ManufacturerBosch Rexroth
Part numberR911305276
Model/typeCSB01.1N-SE-ENS-NNN-NN-S-NN-FW
Product familyIndraDrive C
Component typeSingle-axis servo control unit
Control architectureSingle-axis basic control unit
Power section compatibilityIndraDrive HCS power sections
Power consumption15.5 W
Inrush current5 A
Maximum inrush current pulse width40 ms
Digital inputs8
Digital outputs3
Master communication interfaceSERCOS II via optical fiber
Communication protocolSERCOS II
Encoder feedback interfaceENS interface for IndraDyn, EnDat, 1 Vpp, and SSI encoders

Programming and Configuration

IndraWorks is used for commissioning, configuration, parameterization and diagnostics of the CSB01 control unit in an IndraDrive C system. The software also provides access to SERCOS bus diagnostics and the diagnostic buffer readout.

The FW designation in the model string relates to the associated FWA-INDRV-MPB firmware, which is ordered or flashed separately. Firmware compatibility with the machine application must be confirmed before commissioning a replacement.

A removable firmware or memory module can retain drive parameters and support configuration backup, restoration and transfer to a replacement CSB01 unit. The replacement process should include transferring the correct configuration and confirming that the installed firmware matches the machine application.

Communication and System Integration

The CSB01.1N-SE-ENS-NNN-NN-S-NN-FW communicates with the motion-control master through an integrated SERCOS II interface using optical fiber. This SERCOS II option is identified by the SE element in the model designation.

The ENS encoder interface supports Bosch Rexroth IndraDyn feedback as well as EnDat, 1 Vpp and SSI standard encoders. The installed encoder technology must match the machine configuration and the replacement control unit.

Eight digital inputs and three digital outputs provide connections for machine-level control signals, status signals and control devices. The controller is intended for use with compatible IndraDrive HCS power sections as part of a modular single-axis servo system.

Diagnostics and Status Indication

IndraWorks provides commissioning and diagnostic functions for the CSB01 control unit, including SERCOS bus diagnostics and diagnostic buffer readout. These tools help assess the controller, the optical master communication path and the configured servo system.

During troubleshooting, check the IndraWorks diagnostic information and SERCOS bus status, then confirm that the encoder interface, machine configuration and replacement firmware match the installed system. A replacement or repair exchange is relevant when the control unit cannot be returned to service through configuration and commissioning work.

Replacement and Spare Part Considerations

For a compatible replacement, verify part number R911305276, model/type CSB01.1N-SE-ENS-NNN-NN-S-NN-FW, the SERCOS II SE option, the ENS encoder option and compatibility with the installed IndraDrive HCS power section. The encoder technology used by the machine must also be supported by the ENS interface.

A spare control unit normally requires commissioning work. Transfer the required drive parameters from the removable firmware or memory module or restore the appropriate configuration through IndraWorks, then confirm that the FWA-INDRV-MPB firmware is compatible with the machine application.

If the original unit has an internal control fault, a tested repair or exchange unit can reduce the time needed to restore the IndraDrive C system. ABC Industrial Parts can support configuration transfer and preparation of a replacement CSB01 unit.

Frequently Asked Questions

What is the Bosch Rexroth R911305276?

The R911305276 is a CSB01.1N-SE-ENS-NNN-NN-S-NN-FW single-axis servo control unit for modular Bosch Rexroth IndraDrive C systems.

Which communication protocol does the CSB01.1 use?

The control unit uses SERCOS II communication through an integrated optical-fiber interface to connect with the motion-control master.

Which encoder types are supported by the ENS interface?

The ENS encoder interface supports Bosch Rexroth IndraDyn feedback and EnDat, 1 Vpp and SSI standard encoders.

What software is used to commission the R911305276?

IndraWorks is used for commissioning, configuration, parameterization, SERCOS bus diagnostics and diagnostic buffer readout.

What must be transferred when installing a replacement CSB01 control unit?

The replacement requires the correct drive parameters and configuration, together with FWA-INDRV-MPB firmware compatible with the machine application. A removable firmware or memory module can support backup, restoration and transfer.

How many digital inputs and outputs does this servo control unit provide?

The R911305276 provides eight digital inputs and three digital outputs for machine-level control and status signals.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Rexroth.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.