Lenze E84AVSCE5514SX0 8400 StateLine C Frequency Inverter

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze E84AVSCE5514SX0 is an 8400 StateLine C frequency inverter in the L-Force 8400 product family. This 0.55 kW drive is designed for variable-speed motor control in compact industrial equipment, including conveyor, material-handling, packaging and production machinery. It uses a 400 V three-phase AC supply, has a rated output current of 1.8 A and provides an output frequency range of 0 to 599 Hz. The drive has an IP20 protection rating and is discontinued, making exact part-number matching important when maintaining an existing Lenze installation.
Replacement commissioning involves more than installing the hardware. The inverter can be parameterized with Lenze EASY Starter or L-force Engineer software, while internal non-volatile flash storage and an optional Memory Module support parameter backup and transfer. During a like-for-like replacement, the Memory Module can be moved from the original drive to the replacement when the hardware rating and product series match. The configurable I/O must also correspond with the machine wiring: the unit provides four programmable digital inputs, one Controller Enable input, one 50 mA digital output, one configurable 0 to 10 V or 0/4 to 20 mA analog input and one 0 to 10 V analog output.
For troubleshooting and commissioning checks, status registers can be monitored in EASY Starter and diagnostic codes can be viewed through the keypad display module. The configurable analog and digital I/O, including pulse or frequency evaluation on DI1 and DI2 up to 10 kHz, should match the control arrangement in the machine. For a failed drive, verify the E84AVSCE5514SX0 part number, the 0.55 kW and 400 V three-phase rating, the stored parameters and the connected I/O before returning the replacement to service. ABC Industrial Parts can support repair or exchange requirements for existing Lenze 8400 StateLine installations.
Technical Specifications
| Manufacturer | Lenze |
| Part number | E84AVSCE5514SX0 |
| Model/type | 8400 StateLine C Frequency Inverter |
| Component type | Frequency inverter |
| Product family | L-Force 8400 |
| Series | 8400 StateLine C |
| Rated power | 0.55 kW |
| Rated power | 0.75 HP |
| Rated supply voltage | 400 V AC, 3-phase |
| Permitted supply voltage range | 320 to 550 V AC for the 8400 StateLine series |
| Rated output current | 1.8 A |
| Output frequency range | 0 to 599 Hz |
| Digital inputs | 5 total; 4 programmable inputs plus 1 Controller Enable input |
| Digital outputs | 1, rated 50 mA |
| Analog input | 1 configurable input: 0 to 10 V or 0/4 to 20 mA |
| Analog output | 1, 0 to 10 V |
| Frequency input | Pulse/frequency evaluation on DI1 and DI2 up to 10 kHz |
| Overload capability | 150% for 60 seconds; 180% or 200% for 3 seconds depending on operating mode |
| Parameter storage | Internal non-volatile flash and optional Memory Module |
| Protection rating | IP20 |
| Lifecycle status | Discontinued |
Programming and Configuration
Commissioning and parameterization of the Lenze E84AVSCE5514SX0 can be performed with Lenze EASY Starter or L-force Engineer software. These tools also support diagnostic work through status register monitoring. The required parameter set should be available before a replacement drive is commissioned.
The inverter stores parameters in internal non-volatile flash and can use an optional Memory Module for backup and transfer. For a like-for-like replacement, transferring the Memory Module from the original unit can reduce setup work when the replacement has the same hardware rating and belongs to the matching 8400 StateLine series.
Communication and System Integration
Machine integration is provided through configurable analog and digital I/O. The drive has four programmable digital inputs and one Controller Enable input, together with one digital output rated at 50 mA. The analog section includes one configurable 0 to 10 V or 0/4 to 20 mA input and one 0 to 10 V output.
DI1 and DI2 support pulse or frequency evaluation up to 10 kHz. When replacing the inverter, check that the machine's input signals, Controller Enable circuit, analog reference, output signal and pulse/frequency arrangement correspond with the configuration of the original unit.
Diagnostics and Status Indication
Diagnostic work can be carried out with Lenze EASY Starter or L-force Engineer software. EASY Starter provides status register monitoring, while a keypad display module can show diagnostic codes for checks at the drive.
For a replacement or suspected drive fault, compare the E84AVSCE5514SX0 part number and 0.55 kW, 400 V three-phase rating, then check the parameter transfer, I/O wiring and configured control signals before commissioning the unit.
Replacement and Spare Part Considerations
Use the exact part number E84AVSCE5514SX0 and match the 0.55 kW, 400 V three-phase hardware rating when sourcing a spare. The replacement must also suit the 8400 StateLine C series installation and the machine's configured analog and digital I/O.
A Memory Module can support parameter transfer from the original drive to the replacement. Before commissioning, verify the transferred parameters, the software setup in EASY Starter or L-force Engineer, the Controller Enable circuit and the analog, digital and pulse/frequency connections. ABC Industrial Parts can assist with repair or tested exchange requirements for discontinued Lenze 8400 StateLine equipment.
Frequently Asked Questions
What is the Lenze E84AVSCE5514SX0?
It is a Lenze 8400 StateLine C frequency inverter from the L-Force 8400 family, rated at 0.55 kW with a 400 V three-phase AC supply and 1.8 A rated output current.
Which software is used to commission the E84AVSCE5514SX0?
The inverter can be commissioned and parameterized with Lenze EASY Starter or L-force Engineer software.
Can parameters be transferred to a replacement drive?
Yes. Internal non-volatile flash storage and an optional Memory Module support parameter backup and transfer. A Memory Module can be moved from the original drive when the replacement hardware rating and product series match.
Which I/O does this Lenze frequency inverter provide?
It provides four programmable digital inputs, one Controller Enable input, one 50 mA digital output, one configurable 0 to 10 V or 0/4 to 20 mA analog input and one 0 to 10 V analog output. DI1 and DI2 support pulse or frequency evaluation up to 10 kHz.
How can the drive be diagnosed?
EASY Starter and L-force Engineer can be used for diagnostics, including status register monitoring in EASY Starter. Diagnostic codes can also be viewed through the keypad display module.
What should be checked before installing a replacement?
Check the exact E84AVSCE5514SX0 part number, the 0.55 kW and 400 V three-phase rating, the 8400 StateLine C series, stored parameters and compatibility with the machine's analog, digital and pulse/frequency I/O.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



