Lenze 13142439 E82EV152_4C – 1.5 kW Frequency Inverter
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Lenze 13142439, model E82EV152_4C, is a 1.5 kW frequency inverter for three-phase 400-500 V AC motor applications in the Lenze 8200 vector family. It provides adjustable-speed motor control with a rated output current of 3.9 A at 400 V AC, an output frequency range of 0-650 Hz, and an integrated EMC filter. The drive supports linear V/f, quadratic V/f, vector control, and sensorless torque control for conveyor and material-handling systems, pumps, fans, HVAC equipment, packaging machinery, and other industrial automation applications.
The E82EV152_4C uses terminal-strip I/O with up to 2 configurable analog inputs, up to 2 analog outputs, and up to 6 potential-free digital inputs. Analog connections support 0-10 V, -10 V to +10 V, 0-20 mA, or 4-20 mA signals, while the digital inputs can be used for functions such as speed references, start/stop commands, direction selection, preset speeds, actual-value feedback, and monitoring. Optional plug-in function modules add CANopen or PROFIBUS-DP communication. A replacement can be commissioned through a Lenze Keypad XT or Global Drive Control software, with up to four parameter sets transferable from non-volatile internal memory or plug-in keypad memory.
For troubleshooting, the drive provides fault-code display through the Lenze Keypad readout and diagnostic parameter access through the Global Drive Control software interface. When replacing an E82EV152_4C, check the 1.5 kW rating, 400-500 V AC voltage class, firmware, installed CANopen or PROFIBUS-DP function module, motor-control method, and transferred parameter set before commissioning. The 8200 vector family is discontinued; Lenze i500 and i550 cabinet frequency inverters are identified as successor ranges, but substitution requires system-specific engineering.
Technical Specifications
| Manufacturer | Lenze |
| Part number | 13142439 |
| Model/type | E82EV152_4C |
| Component type | Frequency inverter |
| Product family | 8200 vector |
| Rated output power | 1.5 kW |
| Supply voltage | 400-500 V AC, 3-phase |
| Rated input current | 5.5 A at 400 V AC |
| Rated output current | 3.9 A at 400 V AC |
| Output frequency range | 0-650 Hz |
| Control methods | Linear V/f, quadratic V/f, vector control, sensorless torque control |
| Switching frequency | 1, 2, 4, 8, or 16 kHz |
| Analog inputs | Up to 2 inputs; 0-10 V, -10 V to +10 V, 0-20 mA, or 4-20 mA; 10-bit resolution |
| Analog outputs | Up to 2 outputs; 0-10 V, 0-20 mA, or 4-20 mA; 10-bit resolution |
| Digital inputs | Up to 6 potential-free inputs |
| Optional fieldbus communication | CANopen or PROFIBUS-DP via pluggable function module |
| EMC filter | Integrated |
| Parameter storage | Four parameter sets in non-volatile internal memory or plug-in keypad memory |
| Lifecycle status | Discontinued; successor range includes Lenze i500 and i550 cabinet frequency inverters |
Programming and Configuration
Commissioning and maintenance can be carried out locally with a plug-in Lenze Keypad XT or through the Lenze Global Drive Control software interface. These tools provide access to the inverter parameters, including the selected motor-control method and drive settings.
Up to four parameter sets can be stored in non-volatile internal memory or in plug-in keypad memory. During a replacement, the relevant parameter set can be transferred to the spare drive to reduce commissioning work, followed by checks of the motor application, voltage class, firmware, and installed function module.
Communication and System Integration
The built-in terminal-strip I/O provides up to 2 configurable analog inputs, up to 2 analog outputs, and up to 6 potential-free digital inputs. Analog inputs accept 0-10 V, -10 V to +10 V, 0-20 mA, or 4-20 mA signals with 10-bit resolution. Analog outputs support 0-10 V, 0-20 mA, or 4-20 mA signals with 10-bit resolution.
Network integration is available through optional plug-in function modules for CANopen or PROFIBUS-DP. When exchanging a drive, the installed function module and the communication arrangement must match the existing 8200 vector system. The terminal connections and configured I/O functions should also be checked before the replacement is commissioned.
Diagnostics and Status Indication
The Lenze Keypad readout displays drive fault codes, while the Global Drive Control software interface provides access to diagnostic parameters. These two diagnostic paths support fault review and parameter checks during maintenance and replacement commissioning.
Replacement and Spare Part Considerations
For a replacement Lenze 13142439 E82EV152_4C, match the part number, 1.5 kW output rating, 400-500 V AC three-phase supply class, and 3.9 A rated output current at 400 V AC. Also compare the selected control method, terminal-strip I/O arrangement, firmware, and installed communication function module.
The original parameter configuration can be transferred using the non-volatile internal memory or plug-in Lenze Keypad XT memory, with up to four parameter sets available. Global Drive Control software and the Keypad XT provide the commissioning routes for reviewing and restoring drive settings.
The Lenze 8200 vector family is discontinued. Lenze i500 and i550 cabinet frequency inverters are identified as successor ranges, but they are not presented as direct substitutions. Any successor selection should be engineered against the machine's voltage class, motor-control requirements, communication module, I/O configuration, firmware, and parameter set.
Frequently Asked Questions
What is the exact Lenze replacement part?
The exact part is Lenze 13142439, model/type E82EV152_4C, a 1.5 kW frequency inverter from the 8200 vector family.
What supply and motor rating does the E82EV152_4C use?
It is designed for a 400-500 V AC, 3-phase supply, with a rated output power of 1.5 kW and a rated output current of 3.9 A at 400 V AC.
Which communication options are available?
Optional plug-in function modules provide CANopen or PROFIBUS-DP communication. The installed module must match the existing system configuration during replacement.
How can parameters be transferred to a spare drive?
Up to four parameter sets can be stored in non-volatile internal memory or plug-in keypad memory. Parameter handling is available through a Lenze Keypad XT or Global Drive Control software.
How are faults diagnosed on the Lenze E82EV152_4C?
Fault codes are displayed on the Lenze Keypad readout, and diagnostic parameters can be accessed through the Global Drive Control software interface.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Lenze.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.