Hitachi SJ100-007HFE SJ100 AC Frequency Inverter Drive

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Hitachi SJ100-007HFE is an SJ100 AC frequency inverter drive for variable-speed control of compatible three-phase AC motors. This 0.75 kW (1 HP) drive is designed for 400 V class systems with a 380-460 V AC, three-phase input range. The HFE suffix identifies the European CE version. An integrated digital keypad provides local control, parameter setup, operating monitoring and access to trip history.
The replacement must match the 400 V class supply, 0.75 kW motor rating, HFE regional designation, control wiring and braking resistor requirement. Main power connects through the L1, L2 and L3 screw terminals, while the motor connects through T1, T2 and T3. The SJ100 family control system provides six programmable digital inputs, a +24 V DC auxiliary supply through P24 and L, a +10 V DC analog reference at H, and an FM PWM monitor output for frequency or current. Parameters are stored in internal non-volatile EEPROM, with backup and restore support, so a spare may require parameter transfer and commissioning before returning the machine to service.
For troubleshooting, the integrated digital operator displays operating information, parameter status and trip history. Trip history can be viewed and cleared through the digital operator using parameter B_84. Check the supply range, motor connections, control wiring, configuration and external dynamic braking resistor before placing a replacement into operation. The minimum permitted external braking resistor resistance is 180 Ohm. With a discontinued SJ100 drive, repair or a tested exchange unit can be relevant when an existing unit cannot be returned to service quickly.
Technical Specifications
| Manufacturer | Hitachi |
| Part number | SJ100-007HFE |
| Model/type | SJ100 |
| Component type | AC frequency inverter drive |
| Product family | SJ100 |
| Rated power | 0.75 kW |
| Motor power rating | 1 HP |
| Supply voltage class | 400 V AC class |
| Input voltage range | 380-460 V AC, 3-phase |
| Rated capacity | 1.9 kVA |
| Starting torque | 200% or more |
| Default switching frequency | 5 kHz |
| Power loss at 100% output | Approximately 107 W |
| Power loss at 70% output | Approximately 78 W |
| Minimum dynamic braking resistor | 180 Ohm |
| Main power input | L1, L2, L3 screw terminals |
| Motor output | T1, T2, T3 screw terminals |
| DC choke connection | + and +1 screw terminals |
| Digital inputs | Six programmable inputs on terminals 1-6 |
| Auxiliary control supply | +24 V DC via P24 and L terminals |
| Analog reference input | +10 V DC, 10 mA maximum, H terminal |
| Analog monitor output | PWM output via FM terminal for frequency or current monitoring |
| Operator interface | Integrated digital keypad operator |
| Regional compliance designation | European CE version indicated by suffix HFE |
| Lifecycle status | Discontinued legacy product |
| Overload restriction functions | B_22 and B_23 |
| Software lock modes | B_31 |
| Trip history function | View and clear through digital operator; clearing parameter B_84 |
| Parameter storage | Internal non-volatile EEPROM with backup and restore support |
Programming and Configuration
The integrated digital keypad supports parameter configuration, local operation and operating monitoring within the SJ100 control system. Software lock modes are provided through B31, while overload restriction functions are available through B22 and B_23.
Parameters are stored in internal non-volatile EEPROM, with parameter backup and restore support. When installing a spare, transfer or restore the required parameter set and confirm the motor rating, supply range, control wiring and HFE regional designation before commissioning.
Communication and System Integration
The Hitachi SJ100-007HFE integrates with machine control wiring through six programmable digital inputs on terminals 1-6. The P24 and L terminals provide a +24 V DC auxiliary control supply for the control circuit.
Speed reference and monitoring connections include a +10 V DC analog reference input at the H terminal, limited to 10 mA, and an FM PWM output for frequency or current monitoring. Main power uses L1, L2 and L3 screw terminals, motor output uses T1, T2 and T3, and the + and +1 screw terminals are provided for a DC choke connection.
Diagnostics and Status Indication
The integrated digital operator provides access to operating information, parameter status and trip history. This gives maintenance personnel a local method for reviewing the drive state without requiring a separate operator panel.
Trip history can be cleared through parameter B_84. During replacement commissioning, check the 380-460 V AC three-phase supply, L1-L3 input wiring, T1-T3 motor wiring, control terminals, configuration and the external braking resistor requirement.
Replacement and Spare Part Considerations
The SJ100-007HFE is a discontinued legacy Hitachi drive. For a replacement, match the exact part number, 400 V AC class, 380-460 V AC three-phase input range, 0.75 kW (1 HP) motor rating and HFE regional designation.
Before commissioning, compare the existing control wiring and restore the required SJ100 parameter configuration from the available backup. Confirm the external dynamic braking resistor is suitable and has a minimum resistance of 180 Ohm.
The integrated keypad, EEPROM parameter storage and backup/restore capability support maintenance of existing installations, but a replacement still requires configuration checks and commissioning. Repair or exchange of the original unit may be considered when retaining the existing machine setup is more practical than changing the drive system.
Frequently Asked Questions
What is the Hitachi SJ100-007HFE rated for?
It is a 0.75 kW (1 HP) AC frequency inverter drive for 400 V class three-phase motor control, with a 380-460 V AC input range and a rated capacity of 1.9 kVA.
What must match when replacing an SJ100-007HFE?
Match the SJ100-007HFE part number, 400 V class supply, 380-460 V AC three-phase input, 0.75 kW motor rating, HFE regional designation, control wiring and external braking resistor requirement.
How is the replacement configured?
The integrated digital keypad is used for parameter configuration, local operation and monitoring. Parameters are stored in internal non-volatile EEPROM, with backup and restore support for transferring the required SJ100 configuration.
Which control connections are available?
The drive has six programmable digital inputs on terminals 1-6, a +24 V DC auxiliary supply via P24 and L, a +10 V DC analog reference input at H with a 10 mA maximum, and an FM PWM monitor output.
How can trip history be checked?
Trip history and parameter status can be viewed through the integrated digital operator. Trip history is cleared using parameter B_84.
What braking resistor requirement applies to this drive?
The minimum permitted external dynamic braking resistor resistance is 180 Ohm.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Hitachi.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



